Search

The objective of the study was to evaluate the impact of anti-scalant on fouling of reverse osmosis (RO) membranes in reclamation of secondary effluent which was produced by a conventional activated sludge process at Kranji Water Reclamation Plant with the capacity of 151,000m³/d. The study was carried out using a RO pilot plant with the capacity of 2.4m³/h. The RO plant was in 2:1 configuration and was operated at 75% recovery and at membrane flux of 17 lm-2 h-1. Pilot trials were conducted with and without anti-scalant. Compositions of feed and concentrate streams were analyzed and the pilot data were normalized. The results of the study showed that the plant operation was stable during the first few days after stopping dosage of anti-scalant but after 3-6 days of operation the membranes were fouled. The time lag effect of anti-scalant without dosage was not reported previously and could be potentially beneficial to save chemicals. The membrane fouling was more serious at the second stage due to the formation of calcium phosphate scale when the pilot plant was operated without anti-scalant. The flux of fouled membranes could be completely recovered after clean-in-place (CIP) with citric acid, indicating that scaling dominated the fouling of the RO membranes. These findings in the study could be applied to select an appropriate anti-scalant for prevention from formation of calcium phosphate scale in the RO operation. [ABSTRACT FROM AUTHOR]

Treatment and disposal of RO brine is an important part in sustaining the water reclamation practice. RO brine generated from water reclamation contains high concentration of organic and inorganic compounds. Cost-effective technologies for treatment of RO brine are still relatively unexplored. Thus, this study aim to determine a feasible treatment process for removal of both organic and inorganic compounds in RO brine generated from NEWater production. The proposed treatment consists of biological activated carbon (BAC) column followed by capacitive deionization (CDI) process for organic and inorganic removals, respectively. Preliminary benchscale study demonstrated about 20% TOC removal efficiency was achieved using BAC at 40 mins empty bed contact time (EBCT) while the CDI process was able to remove more than 90% conductivity reducing it from 2.19 mS/cm to only about 164µS/cm. More than 90% cations and anions in the BAC effluent were removed using CDI process. In addition, TOC and TN removals of 78% and 91%, respectively were also attained through this process. About 90% water recovery was achieved. This process shows the potential of increased water recovery in the reclamation process while volume for disposal can be further minimized. Further studies on the sustainable operation and process optimization are ongoing. [ABSTRACT FROM AUTHOR]

Singapore has been using dual membrane technology (MF/UF RO) to produce high-grade water (NEWater) from secondary treated sewage. Membrane bioreactor (MBR) has very high potential and will lead to the further improvement of the productivity and quality of high-grade water. This study was focused on the technical feasibility of MBR system for water reclamation in Singapore, making a comparison between various membrane systems available and to get operational experience in terms of membrane cleaning and other issues. Three MBR plants were built at Bedok Water Reclamation Plant with a design flow of 300m³/day each. They were commissioned in March 2003. Three different types of submerged membranes were tested. They are Membrane A, plate sheet membrane with pore size of 0.4 µm; Membrane B, hollow fibre membrane with pore size of 0.4 mm; and Membrane C, hollow fibre membrane with pore size of 0.035 µm. The permeate quality of all the three MBR Systems were found equivalent to or better than that of the conventional tertiary treatment by ultrafiltration. MBR permeate TOC was about 2 mg/l lower than UF permeate TOC. GC-MS, GC-ECD and HPLC scan results show that trace organic contaminants in MBR permeate and UF permeate were in the same range. MBR power consumption can be less than 1 kwh/m³. Gel layer or dynamic membrane generated on the submerged membrane surface played an important role for the lower MBR permeate TOC than the supernatant TOC in the membrane tank. Intensive chemical cleaning can temporarily remove this layer. During normal operation conditions, the formation of dynamic membrane may need one day to obtain the steady low TOC levels in MBR permeate. [ABSTRACT FROM AUTHOR]