Search

In this study, an artificial wetland filler matrix capable of effectively fixing phosphorus was prepared using a non-combustion process to save energy. To evaluate the adsorption performance of this filler, adsorption experiments were performed and the phosphorus adsorption mechanism characterization was studied. An alkaline environment was found to be conducive to the increase of adsorption capacity, but excessive alkalinity was not conducive to adsorption. Static adsorption experiments showed that the phosphorus removal rate could reach 95% in the simulated phosphorus-containing wastewater after adsorption completion. The adsorption process is closely simulated by the pseudo-second-kinetic adsorption model. The isothermal adsorption experiment data were consistent with the Langmuir and the Freundlich adsorption isotherms. The characterization results showed a large number of micropores and adsorption binding sites inside and on the surface of the filler. Speciation analysis on the adsorbed phosphorus revealed that chemisorption by calcium in this filler was the dominant adsorption mechanism. The research results of this study provide the basis and reference for the development of high-efficiency phosphorus removal filler in constructed wetlands. [ABSTRACT FROM AUTHOR]

A novel process for sewage sludge bioleaching by mixed Thiobacilli (Acidithiobacillus thiooxidans and Acidithiobacillus ferrooxidans) using a 12-stage, 180 L working volume continuous plug-flow bioreactor, is presented. The objective of the present study was to assess the impact of some parameters on the sludge dewaterability and to improve the sludge dewaterability by optimization of these parameters. The parameters examined were sludge moisture content, nutrients dosage, aeration rate, and the number of reactors. The order of the influence of these factors on sludge dewaterability was found to be sludge moisture content>nutrients dosage> aeration rate> number of reactors. The optimized conditions were: sludge moisture content, 98.0%, nutrients dosage, 9 g/L, aeration rate, 8 m³/h, and 10 reactors. Confirmation experiments conducted under optimum conditions demonstrate the sludge dewaterability to be remarkably improved. After 2 days of bioleaching, the moisture of bioleached sludge cake was reduced to below 60%. [ABSTRACT FROM AUTHOR]

Bioleaching has been demonstrated to be an effective technology for the removal of heavy metals and sludge dewaterability. Since bacteria gain nutrients by diffusion of soluble compounds, the insolubility of elemental sulfur may slow the growth of bacteria. Thus, it is very important to find an energy substance quickly become available to Acidithiobacillus thiooxidans. This paper studies the improvement of sludge dewaterability and heavy metal removal with sodium thiosulfate as the source of energy for Acidithiobacillus thiooxidans. Through orthogonal experiments with specific resistance to filtration (SRF) as the target index, four factors (FeSO4 dosage, Na2S2O3 dosage, sludge reflux ratio and sludge moisture content) were identified to be the important influencing parameters. The optimal conditions were: FeSO4 dosage, 8 g/L; Na2S2O3 dosage, 1.5 g/L; sludge reflux ratio, 30%; sludge moisture content, 97%. Results indicated that the SRF of the sludge decreased from 9.89 x 1012 to 1.03 x 1011 m/kg. The removal efficiencies of heavy metals Cu, Zn, Pb and Cr could reach 83%, 78%, 31% and 38% within 3 days, respectively. These results confirm the potential of sodium thiosulfate as an alternative energy substance in bioleaching to improve sludge dewaterability as well as removal of metals. [ABSTRACT FROM AUTHOR]

Bioleaching is a promising technology for removal of metals from sludge and improvement of its dewaterability. Most of the previous studies of bioleaching were focused on removal of metals; bioleaching in cold environments has not been studied extensively. In this study, Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans were acclimated at 15 °C and co-inoculated to explore the optimal conditions for improvement of sludge dewaterability and removal of metals by the sequencing batch reactors. The data show after 6 days of bioleaching at 15 °C, 89.6% of Zn, 72.8% of Cu and 39.4% of Pb were removed and the specific resistance to filtration (SRF) was reduced to ~12%. In addition, the best conditions for bioleaching are an initial pH of 6, a 15% (v/v) inoculum concentration, and A. thiooxidans and A. ferrooxidans mixed in a ratio of 4:1. We found that bioleaching of heavy metals is closely related to final pH, while the sludge SRF is dominated by other factors. Bioleaching can be completed in 6 days, and the sludge dewaterability and removal of metals at 15 °C meet the requirements of most sewage treatment plants. [ABSTRACT FROM AUTHOR]