Search

Given the importance of the watershed protection plans, direct determination of phosphorus (P) mineralization rates in advanced wastewater treatment facility effluents is crucial for developing the most protective strategies minimiz eutrophication in receiving surface waters. In this study, algal bioassays were used to determine the uptake rate of dissolved P in effluents from a broad range of advanced nutrient removal technologies (e.g., membrane biological reactor, traditional biological, tertiary membrane, Blue PRO™, etc.). Dissolved P uptake kinetics were fit to a gamma model and three first-order decay models. A traditional one-pool model correlated poorly with the experimental data (i.e., r 2 = 0.73 ± 0.09), whereas two-pool model and three-pool models performed much better (i.e., r 2 > 0.9). These models also provided strong evidence for the existence of recalcitrant P in the effluents from these tertiary facilities. The Gamma model showed the mineralization of organic P followed a reactive continuum and further suggested the partitioning of P loads with different bioavailability levels should be accounted for the future modeling practices. From a modeling perspective, the Gamma model should be considered to be the theoretically best model as it gave the most parsimonious fit to the data using the fewest terms. Our study suggested that the current Total Maximum Daily Load (TMDL) model could be easily modified with the updated mineralization kinetics, which should lead to both ecological and economic benefits. [ABSTRACT FROM AUTHOR]

Abstract: Because eutrophication is a widespread consequence of wastewater discharges, there is a strong impetus to develop new approaches to remove phosphorus (P) from wastewater treatment plant (WWTP) effluents. We examined the effluents from a pilot plant that is testing various alum based processes for achieving>99% P removal, however, it is not known how these advanced P removal technologies affect the bioavailability of P (BAP). We tested how the percent BAP (%BAP) varied with different P removal levels using an algal growth bioassay methodology. This facility reduced total P concentrations from ≈ 500μgL−1 in the pilot plant influent to 19±4 (±SD)μgL−1 in the final effluent, and our results showed that as the level of P removal increased, the %BAP of the product declined sharply, r 2 =0.98. Prior to alum treatment, the influent had an average %BAP of 79±13%, and after three steps of alum-based removal the %BAP averaged 7±4%. Thus, this alum based P removal process was very effective at sequestering the P forms that most readily stimulate algal growth. Further, our results show the final BAP of the effluent was only ≈ 50% of the “reactive” P concentration. These results have important implications for nutrient management and trading schemes. [Copyright &y& Elsevier]