Search

• Zwitterionic hydrogel nanolayer was synthesized by interfacial polymerization. • Zwitterionic monomer modulated the hydrogel layer structure and membrane characters. • Zwitterionic hydrogel hindered the adhesion of biomacromolecules and killed microbes. • The growth of biofilm on zwitterionic hydrogel nanolayer surface was inhibited. Ultralow-pressurized ultrafiltration membrane process with low energy consumption is promising in surface water purification. However, membrane fouling and low selectivity are significant barriers for the wide application of this process. Herein, an ultrathin zwitterionic hydrogel nanolayer was in-situ grown on polysulfone ultrafiltration membrane surface through interfacially-initiated free radical polymerization. The hydrogel-modified membrane possessed improved biological fouling resistance during the dynamic filtration process (bovine serum albumin, Escherichia coli and Staphylococcus aureus), comparing with commercial polysulfone membrane. The enhanced biofouling resistance ability of zwitterionic hydrogel nanolayer was derived from the foulant repulsion of hydration shell and the bactericidal effect of quaternary ammonium, according to the results of foulant-membrane interaction energy analyses and antibacterial performances. In surface water treatment, the zwitterionic hydrogel layer inhibited biofouling and resulted in the formation of a loose and thin biofilm. In addition, the hydrogel-modified membrane possessed 22% improvement in dissolved organic carbon (DOC) removal and 134% increasement in stable water flux, compared to commercial polysulfone membrane. The in-situ grown zwitterionic hydrogel nanolayer on membrane surface offers a prospectively alternative for biofouling control in ultralow-pressurized membrane process. [Display omitted] [ABSTRACT FROM AUTHOR]

Increasing attention has been focused on the removal of micropollutants from contaminated drinking source water. However, low rejection efficiency and membrane fouling still inhibit further application of nanofiltration membrane in this field. Interesting results were found that the residual hydrolyzed-aluminum nanoparticles from supernatant after coagulation and sedimentation strongly improved the nanofiltration performance for micropollutant removal. A simulated raw water containing humic acids, micropollutants and kaolinite clay was employed to investigate the factors of water matrix affecting the nanoparticle-enhanced nanofiltration for micropollutant removal. Results of experiments showed that these hydrolyzed-aluminum nanoparticles easily induced the aggregation of bisphenol-A (BPA) and humic acids in the supernatant. The enhancement of BPA removal was mainly attributed to the repelling interaction between the Al-BPA-DOC complexity and in situ -modified membrane surface during nanofiltration. 'This in situ surface modification by the hydrolyzed-aluminum nanoparticles improved membrane hydrophilicity, roughness and positively-charging capacity. For the treatment of River Songhua water spiked with micropollutant, the percentage removal of BPA was improved to be 88.5%, much more than the case of single nanofiltration without coagulation (60.7%). Meanwhile, the membrane fouling was reduced by 2.13 times than the case of single nanofiltration without the dynamically deposited-layer of nanoparticles. This in situ modification of nanofiltration membrane by hydrolyzed-aluminum nanoparticles achieved excellent removal efficiency for micropollutants from River Songhua water background. Image 1 • Micropollutant removal by nanofiltration was enhanced by hydrolyzed-aluminum nanoparticles. • Loosely hydrophilic deposition on membrane surface alleviated membrane fouling. • Aluminum-deposited membrane achieved excellent performance in background of river water. [ABSTRACT FROM AUTHOR]

Understanding the influences of cations on membrane fouling was important to improve the performance of membrane filtration system, however, opposite conclusions were made in different studies. Meanwhile, although the influences of cation concentration have been studied extensively, few attentions have been paid to the cation valence. To clarify it, the effects of typical cations on membrane fouling and cleaning, as well as the related mechanisms were investigated systemically in this study. K+ and Ca2+ were chosen as the representative cations, and humic acid (HA) was chosen as the membrane foulants. The results demonstrated Ca2+ promoted the formation of reversible fouling, meanwhile higher removal efficiency of HA could also be achieved with the assistance of filtration cake containing HA + Ca2+. However, K+ led to the formation of more recalcitrant irreversible fouling. By comparing the concentration of cations in feed and permeate, analyzing the influence of cations on size of HA flocs, and the detailed SEM, AFM and TEM observation, it could be found that different mechanisms dominated the interaction between cations and HA. The bridging effect induced by Ca2+ attributed to the extension of HA molecules, while the electrostatic shielding effect induced by K+ led to the compression of them. Moreover, the different characteristics of hydrated Ca2+ and K+ also contributed to the different structures of foulant layers formed by HA + Ca2+ and HA + K+. Given the abundance of K+ and Ca2+ in natural water, results of this study can provide valuable advice for practical membrane filtration process. Image 1 • K+ makes the HA pollution layer more compact by electrostatic shielding. • HAs aggregation driving by HA-Ca2+ complexation contributes to pollutant removal. • The hydration force of cations is a key factor for membrane fouling. [ABSTRACT FROM AUTHOR]