Search

The article offers step-by-step instruction for setting up a traditional plaster shop.

In this article, the author repairing old and damaged walls and ceilings including installation of FibaFuse drywall tape; and applying basecoat and finish coat plasters.

The article focuses on the use of a method called plaster consolidation by Rod Stewart, residential contractor in Canada, to prevent deterioration of ceilings of old buildings based on a concept of Morgan W. Phillips, father of architectural conservation, who used acrylic adhesives.

Product Introductions and Systems Technology Breakthroughs Developed by United States Gypsum Company 1902 - 2002 1902 - United States Gypsum Company Founded The company was formed in Chicago when 18 [...]

The article discusses various aspects of the use of plaster as a construction material as of November 2013. It highlights the history of plaster use in construction from the time of ancient Egypt until the present time. The evolution of plaster as a building material is discussed including the various materials used with plaster including gypsum, clay and limestone. The author describes the advances in technology related to use of plaster in construction.

The article discusses techniques for plaster/stucco application in hot and cold temperature conditions. It notes that hot weather affects the curing process of plaster in terms of moisture loss that leads to lower tensile strength and high occurrence of cracking. In relation to this, cold weather weakens the plaster as it absorbs warm moisture needed for proper cement hydration. The article recommends using plaster materials with optimal water retention to avoid weather-induced cracking.

The article discusses the confusion with the terms plaster and decorative finish when referring to interior finishes. One scenario involving a subcontractor with a drywall license shows the importance of using the appropriate term when applying for the use of a specific product. Examples of products labeled as decorative coatings and used the word plaster are Vella from Specialized Buildings Products, Armourtone and Omnicoat Variance Acrylic Finishes, and Vero-Rialto's Vero Venetian plasters.

The article discusses the close relationship between plaster and masonry in the design and building construction industry. He however states that using building paper and housewrap between a cement plaster and masonry substrate is not a good idea. He further gives the reason behind his claim including the decrease in the desired bond between cement and plaster, the questionable bond for the lath/paper combination provides less moisture protection and the failure to achieve the required sealing quality when using pins.

The article discusses difficulties in defining the factors that affect the performance of Portland cement, focusing on the development of cracks in cement stucco. The impact of other materials that abut or are part of the plaster system must be considered. Excessive cracking occurs when plastering industry installation standards are not followed.

The article evaluates several equipment and supplies in the walls and ceilings industry, including the QuietBrace sound-reducing sheathing from Temple-Inland, the K-series portable compressor from Jenny Products Inc., and a liquid plaster from Van Fleet.

An interview with Kevin Moyer, business manager of Superior Walls Finishes for USG. According to Moyer, she started with USG as a project engineer. He states that the manufacturing of interior plasters has been consolidated by the company in four locations. He asserts that the interior plasters offered by the company is not competing with drywall.

The article focuses on plaster pumps. The first piston style two-cylinder plaster pump was called the Two Banger Tommy Gun. Currently, most pumps are four-cylinder models, which deliver higher volumes of plaster. Originally, only the second coat would be pumped while the first coat would be hand applied because the building paper between open studs tear due to intense pressure when plaster is sprayed.

The article focuses on stucco cracks and offers some repair suggestions. It states that finding the source of the stress can be made easier if all stresses are placed into one of two categories, stress within the plaster membrane and outside stress placed upon the plaster membrane. It cites several common mistakes made that add to shrinkage stress, such as lack of curing. It suggests to paint the wall or ceiling with an acrylic paint after treating the crack.

The author reflects on the significance of adopting technology by the plaster industry. The author encourages construction workers to take advantage of teleconferencing or online seminars to learn new techniques and the latest trends. He points out that knowledge creates confidence and helps in taking the next step to get on the high technology trend.

The article features commercial products for the drywall construction industry including decorative ceiling beams by Outwater, Voc-Free Venetian Plasters from Dimensions International and Lafarge Mold Defense Products from Lafarge.

The article discusses plaster ornamentation. Although exterior insulation and finish system products are great products, real plaster can still be used in ornamentation. Interior ornamental plaster is categorized as either run or cast. Run plaster is plastering in place and usually done over expanded metal lath. Cast plaster is used where running plaster is not practical.

CSR America Inc. is changing its name to Rinker Materials Corp., in an effort to build strong national brand awareness, announced the company's CEO David Clarke. There has been no [...]

The article offers information on Thomas Jefferson, American Founding Father who developed the national style of civic architecture, for the federal states. It mentions that the bald eagle was selected as the emblem of the new republic in 1782. It mentions that his commission of modeled plaster have 18 plaster stars with Louisiana as 18th state.

The article focuses on the role of Dillon Construction Services in the restoration of the Unitarian Church of Charleston (UCC) in South Carolina. Topics discussed include the history of UCC with emphasis on its Gothic architecture, a background on Dillon and its president, Kirk Dillon, the two phases of construction services centered on the stucco and steeple repair and the interior plaster restoration, and South Carolina's Master of Plaster Finishing Systems' Restoration Plaster product.

The article discusses the use of plaster in the history of architecture. Topics include Baroque architecture that departs from the pure Renaissance and Classic architecture in the 17th century and the French Rococo reinterpreting the Baroque style during the time of Louis XV with the use of plaster for ornamental at eye level. It also mentions the use of plaster in Gothic-inspired designs, the Palldian influence and English neoclassical design as precursor of federal American architecture.

The article discusses the expected changes in the building codes and their implications and challenges for contractors working with three-coat plaster clad wall assemblies as of November 2013. Background is presented on states' adoption of the latest American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) 90.1 Standards. Implications for the use of weather resistant barriers, "Z" channels and proprietary lath systems, as well as thermal bridging and imaging.

The article focuses on The Plaza in California, which was initially built at the turn-of-the-century and includes historic buildings. "Fallen Angel" is the first notable movie filmed at the site in 1945. The Starbucks structure was established in 1911 and was the First National Bank. Particular focus is given to the interior plaster work at the bank. The author describes the ornamentation and attention to detail, including a blend of run plaster mould with dentils.