Search

Novel nanoemulsion-based drug delivery systems (DDS) have been proposed as alternative and effective approach for the delivery of various types of poorly water-soluble drugs in the last decade. This nanoformulation strategy significantly improves the cell uptake and bioavailability of numerous hydrophobic drugs by increasing their solubility and dissolution rate, maintaining drug concentration within the therapeutic range by controlling the drug release rate, and reducing systemic side effects by targeting to specific disease site, thus offering a better patient compliance. To date, cavitation technology has emerged to be an energy-efficient and promising technique to generate such nanoscale emulsions encapsulating a variety of highly potent pharmaceutical agents that are water-insoluble. The micro-turbulent implosions of cavitation bubbles tear-off primary giant oily emulsion droplets to nano-scale, spontaneously leading to the formation of highly uniform drug contained nanodroplets. A substantial body of recent literatures in the field of nanoemulsions suggests that cavitation is a facile, cost-reducing yet safer generation tool, remarkably highlighting its industrial commercial viability in the development of designing novel nanocarriers or enhancing the properties of existing pharmaceutical products. In this review, the fundamentals of nanoemulsion and the principles involved in their formation are presented. The underlying mechanisms in the generation of pharmaceutical nanoemulsion under acoustic field as well as the advantages of using cavitation compared to the conventional techniques are also highlighted. This review focuses on recent nanoemulsion-based DDS development and how cavitation through ultrasound and hydrodynamic means is useful to generate the pharmaceutical grade nanoemulsions including the complex double or submicron multiple emulsions.

In the present investigation, the operating efficiency of a bench-top air-driven microfluidizer has been compared to that of a bench-top high power ultrasound horn in the production of pharmaceutical grade nanoemulsions using aspirin as a model drug. The influence of important process variables as well as the pre-homogenization and drug loading on the resultant mean droplet diameter and size distribution of emulsion droplets was studied in an oil-in-water nanoemulsion incorporated with a model drug aspirin. Results obtained show that both the emulsification methods were capable of producing very fine nanoemulsions containing aspirin with the minimum droplet size ranging from 150 to 170 nm. In case of using the microfluidizer, it has been observed that the size of the emulsion droplets obtained was almost independent of the applied microfluidization pressure (200-600 bar) and the number of passes (up to 10 passes) while the pre-homogenization and drug loading had a marginal effect in increasing the droplet size. Whereas, in the case of ultrasound emulsification, the droplet size was generally decreased with an increase in sonication amplitude (50-70%) and period of sonication but the resultant emulsion was found to be dependent on the pre-homogenization and drug loading. The STEM microscopic observations illustrated that the optimized formulations obtained using ultrasound cavitation technique are comparable to microfluidized emulsions. These comparative results demonstrated that ultrasound cavitation is a relatively energy-efficient yet promising method of pharmaceutical nanoemulsions as compared to microfluidizer although the means used to generate the nanoemulsions are different.

The paraffin particles were prepared by quenching process after sonicating the solution of paraffin and water at 80 degrees C. The resultant paraffin particles were then used as template for the preparation of macroporous zirconia materials. For this, zirconium normal butoxide (ZNB) modified with triethanolamine (TEA) was first hydrolyzed by water containing the dispersed paraffin particles with the surfactant, Sodium di(2-ethylhexyl) sulfosuccinate. This resulted in the formation of a slurry consisting of hydrolyzed sol and paraffin particles. After centrifugation, a cake packed with hydrated sol and paraffin particles were obtained which was then subjected to heat treatment. The sample obtained after heat treatment contained finely dispersed pores in the size range from 40 nm to 2 microm. Moreover, using the present approach it has also been observed that, change in pore size of zirconia wall is possible with a change in size of the paraffin particles. Thus, the present approach is a novel way of producing porous materials as the particle size of the template could be changed and templates become hard when they were molded as compared to the conventional methods in which there is no change in phase for the templates under 100 degrees C.

The present work analyses, in detail, the optimization of a sonochemical process with respect to concentration of precursor and power supplied in a system. This is due to that even a small change in power dramatically changes the high-energy conditions created with the bubble collapse. A model reaction that has been considered for this purpose involves the decomposition of Fe(CO)5 in decalin solvent as this reaction is strongly influenced by the cavitation conditions. Sonochemical treatment of this carbonyl results in the formation of amorphous Fe2O3, which on heat treatment gives nanocrystalline Fe2O3. It has been observed that concentration and power density parameters play an important role to obtain higher decomposition of Fe(CO)5 and hence higher yield of the amorphous Fe2O3 product. Also, using the experimentally observed results, a correlation (polynomial) has been developed.

A novel method of treating a dye solution has been studied by hydrodynamic cavitation using multiple hole orifice plates. The present work deals with the effect of geometry of the multiple hole orifice plates on the degradation of a cationic dye rhodamine B (rhB) solution. The efficiency of this technique has been compared with the cavitation generated by ultrasound and it has been found that there is substantial enhancement in the extent of degradation of this dye solution using hydrodynamic cavitation. Large-scale operation coupled with better energy efficiency makes this technique a viable alternative for conventional cavitational reactors.

In this investigation, an attempt has been made to establish the physical mechanism of sonochemical synthesis of zinc ferrite with concurrent analysis of experimental results and simulations of cavitation bubble dynamics. Experiments have been conducted with mechanical stirring as well as under ultrasound irradiation with variation of pH and the static pressure of the reaction medium. Results of this study reveal that physical effects produced by transient cavitation bubbles play a crucial role in the chemical synthesis. Generation of high amplitude shock waves by transient cavitation bubbles manifest their effect through in situ micro-calcination of metal oxide particles (which are generated through thermal hydrolysis of metal acetates) due to energetic collisions between them. Micro-calcination of oxide particles can also occur in the thin liquid shell surrounding bubble interface, which gets heated up during transient collapse of bubbles. The sonochemical effect of production of OH radicals and H(2)O(2), in itself, is not able to yield ferrite. Moreover, as the in situ micro-calcination involves very small number of particles or even individual particles (as in intra-particle collisions), the agglomeration between resulting ferrite particles is negligible (as compared to external calcination in convention route), leading to ferrite particles of smaller size (6 nm).

In the present investigation, synthesis of manganese zinc ferrite (Mn(0.5)Zn(0.5)Fe(2)O(4)) nanoparticles with narrow size distribution have been prepared using ultrasound assisted emulsion (consisting of rapeseed oil as an oil phase and aqueous solution of Mn(2+), Zn(2+) and Fe(2+) acetates) and evaporation processes. The as-prepared ferrite was nanocrystalline. In order to remove the small amount of oil present on the surface of the ferrite, it was subjected to heat treatment at 300 °C for 3h. Both the as-prepared and heat treated ferrites have been characterized by X-ray diffraction (XRD), infrared spectroscopy (IR), TGA/DTA, transmission electron microscopy (TEM) and energy dispersion X-ray spectroscopy (EDS) techniques. As-prepared ferrite is of 20 nm, whereas the heat treated ferrite shows the size of 33 nm. In addition, magnetic properties of the as-prepared as well as the heat treated ferrites have also been carried out and the results of which show that the spontaneous magnetization (σ(s)) of the heat treated sample (24.1 emu/g) is significantly higher than that of the as-synthesized sample (1.81 emu/g). The key features of this method are avoiding (a) the cumbersome conditions that exist in the conventional methods; (b) usage of necessary additive components (stabilizers or surfactants, precipitants) and (c) calcination requirements. In addition, rapeseed oil as an oil phase has been used for the first time, replacing the toxic and troublesome organic nonpolar solvents. As a whole, this simple straightforward sonochemical approach results in more phase pure system with improved magnetization.

Using a standing wave sonochemical reactor (SWSR), the influences of parameters of ultrasonic power input, sonication time, sonication temperature and the amount of propanol (which generates the reducing radicals) were systemically investigated to ascertain and optimize the best conditions for the sonochemical reduction of Pt from its precursor hexachloroplatinic acid and then its deposition on rutile TiO(2) (platinization of rutile titania) catalysts. Catalytic activity of the prepared platinized catalysts was tested in the reaction of methyl orange degradation. The results of photocatalytic activity study in the degradation of methyl orange further demonstrate that sonochemically as-prepared Pt/TiO(2) catalysts show a pronounced increase ( approximately 2 times) in photodegradation, even with a deposition of small amounts of platinum (1.4wt.%), as compared to the unsupported or naked rutile titania. Although there are various parameters that influence the sonochemical platinization of rutile titania, the present optimization results clearly indicate that the best photocatalytic degradation of methyl orange can be obtained when the experimental conditions of the preparation were with an input power of 50W, an initial hexachloroplatinic acid volume of 70ml (which results into 1.4wt.% Pt on TiO(2)), sonication time of 90min, 0.18g of propanol and a temperature of 10 degrees C were adopted. The method of ultrasound application to prepare metal supported semiconductors has many advantages such as convenience, safety and high efficiency. Furthermore, it is hopeful that this optimization study can also be extended to the generation of similar metal supported semiconductors.