Search

The characterization of brain tissue is crucial to better understand neurological disorders. Mechanical characterization is an emerging tool in that field. The purpose of this work was to validate a transient ultrasound technique aimed at measuring dispersion of mechanical parameters of the brain tissue. The first part of this work was dedicated to the validation of that technique by comparing it with two proven rheology methods: a rotating plate rheometer, and a viscoelastic spectroscopy apparatus. Experiments were done on tissue mimicking gels. Results were compared on storage and loss modulus in the 20-100 Hz band. Our method was validated for the measurement of storage modulus dispersion, with some reserves on the measurement of loss modulus. The second part of this work was the measurement of the mechanical characteristics of ex vivo human white matter. We were able to measure the dispersion of the storage and loss modulus in the 20-100 Hz band, fitting the data with a custom power law model., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The accumulation of microdamage in trabecular bone tissue is suspected of being a predictive indicator of osteoporosis diagnosis. To quantify this microdamage, the Dynamic AcoustoElastic Testing (DAET) method measures the Time Of Flight (TOF) and amplitude variations of transmitted ultrasound (US) pulses, while the bone sample is submitted to a low frequency sinusoidal hydrostatic pressure (opening/closing of microcracks). However, DAET is both sensitive to viscoelastic properties changes and microcracks density. To verify the microcracks density contribution on DAET results, a numerical approach is proposed. Multliple configurations of microdamaged trabecular bone-tissue-like mesh have been simulated. A 2D pseudo-spectral time domain numerical model was then developed to simulate linear wave propagation in heterogeneous solids. The influence of the microcracks number and orientation on the US TOF was particularly investigated. Results are discussed and compared with experimental data obtained from DAET measurements in trabecular bone samples., (Copyright © 2013 Elsevier B.V. All rights reserved.)

In a recent publication [E. Filoux, S. Callé, D. Certon, M. Lethiecq, F. Levassort, Modeling of piezoelectric transducers with combined pseudospectral and finite-difference methods, J. Acoust. Soc. Am. 123 (6) (2008) 4165-4173], a new finite-difference/pseudospectral time-domain (FD-PSTD) algorithm was presented and used to model the generation of acoustic waves by a piezoelectric resonator and their propagation in the structure and the surrounding water. In this paper, the model has been extended to simulate the two-dimensional behaviour of a complete single-element transducer, composed of the resonator, a backing and a front matching layer. This further version of the model takes into account the mechanical loss in materials, and enables the calculation of electrical impedance, which is a characteristic of high interest to optimize the performance of ultrasonic transducers. The impedance curves of a PZT [URL: http://www.ferroperm-piezo.com (last viewed 04/2008); B. Jaffe, R.S. Roth, S. Marzullo, Piezoelectric properties of lead zirconate-lead titanate solid-solution ceramics, J. Appl. Phys. 25 (1954) 809-810] plate-based high-frequency transducer, with a 50 MHz thickness resonant frequency, were compared to those of a KLM model [R. Krimholtz, D.A. Leedom, G.L. Matthei, New equivalent circuit for elementary piezoelectric transducers, Electron. Lett. 6 (1970) 398-399] in the one-dimensional case. The acoustical properties were also found to be in good agreement with those obtained using the finite element (FE) method of ATILA software in two-dimensional configuration.