Search

• A tunable bidirectional SH wave transducer was proposed. • The transducer was based on antiparallel d 15 piezoelectric strips (APS) • Simulations and experiments validated the proposed SH wave transducer. • The transducer can selectively suppress SH 0 wave and excited SH 1 wave. • The transducer can also excite circumferential SH wave in pipelines. Guided wave based defects inspection is very promising in the field of structural health monitoring (SHM) and nondestructive testing (NDT) due to its less dissipation and thus long distance coverage. In comparison with the widely used Lamb waves, shear horizontal (SH) waves are relatively simple but less investigated probably due to the traditional notion that SH waves were usually excited by electromagnetic acoustic transducers (EMAT). In this work, we proposed a tunable method to excite single-mode bidirectional SH waves in plates using antiparallel thickness-shear (d 15) piezoelectric strips (APS). The proposed SH wave driving mechanism here is similar to that by using the periodic permanent magnetics (PPM) based EMAT with the period of strips equal to half of the wavelength. Both finite element simulations and experiments were conducted to validate this transducer in excitation of bidirectional SH waves. Results show that the Lamb waves excited by single piezoelectric strip can be suppressed very well. The radiation angle of the excited bidirectional SH wave can be reduced by extending the strip length, increasing the driving frequency or using more strips. Moreover, the APS transducer can selectively excite SH 1 wave and suppress the SH 0 wave at 174 kHz and 273 kHz in a 10 mm-thick aluminum plate. Considering its simple structure, flexible design and low excitation energy, the APS SH wave transducer is expected to be widely used in near future. [ABSTRACT FROM AUTHOR]

• A SH wave phased array system was proposed for monitoring of plate-like structures. • The system can detect both surface defects and inside defects without baseline. • The system can detect a through-thickness hole as small as 2 mm. • The system can detect multi defects simultaneously. Guided wave based structural health monitoring (SHM) has been regarded as an effective tool to detect the early damage in large structures and thus avoid possible catastrophic failure. In recent years, Lamb wave phased array SHM technology had been intensively investigated while the inherent multi-mode and dispersive characteristic of Lamb waves limits its further applications. In comparison, the fundamental shear horizontal (SH 0) wave is non-dispersive with uncoupled displacements and thus more promising for defect detection. In this work, we proposed an SH 0 wave linear phased array SHM system based on our recently proposed omni-directional SH wave piezoelectric transducer (OSH-PT). Firstly, the working principle of the phased array system was presented and the total focusing method (TFM) was employed for imaging. Then the SH 0 wave mode generated by the OSH-PT was confirmed in a defect-free plate. Finally, experiments were carried out to examine the performances of this SHM system. Results showed that the proposed system can detect a through-thickness hole as small as 2 mm in diameter with the location error only about 6.3 mm. Moreover, the proposed phased array system can also detect multi-defects. Due to its low working frequency and thus low attenuation, the proposed phased array system is capable of monitoring large structures. This work will lay the foundations of SH wave based phased array SHM. [ABSTRACT FROM AUTHOR]