Search

Abstract: Rock bolts used for the reinforcement of underground mines, tunnels and nuclear waste repositories are made up of low and medium carbon steels, and high strength low alloy steels. Typical rock bolt systems used for rock reinforcement are mechanically anchored bolts, grout anchored, frictional rock stabilizers and strand anchors. For nuclear waste repository sites such as Yucca Mountain (YM) as well as for mines and tunnels, in addition to mechanical properties, corrosion properties are also important due to potential seepage of water through the fractures or pores in the rock. During temporary rock support period of 50–100years, the temperature of the tunnel at YM should be maintained at ambient conditions. For any reason if the rock bolts are exposed to YM waters and high temperatures in the tunnel then there is a chance of corrosion of steel rock bolts. In this study an attempt was made to study the corrosion properties of various potential rock bolts for YM tunnel support via the aid of electrochemical corrosion testing. At ambient temperature (25°C) all the rock bolts that were studied showed good corrosion resistance in these waters. At higher temperatures, 60°C and 90°C, corrosion resistance of rock bolts decreased, but due to special stress relief heat treatment of one of the frictional rock stabilizers (Swellex Mn 24) the corrosion rates were lower than all other tested rock bolts. Note: Swellex, Split set and Williams are the proprietary names of Atlas Copco, International Roll Forms, Inc. and Williams Form Engineering Corp, respectively. [ABSTRACT FROM AUTHOR]