Search

Rapid advances in computing, sensing and telecommunication technology offer unprecedented opportunities for artificial intelligence concepts to expand their applications in the field of traffic management and control. Our methodology gravitates around a powerful decision-making method: ensemble-based systems. This technique is used to accurately classify the near future traffic conditions and to make efficient decisions for adapting the traffic lights sequences within an urban area to optimize the traffic flows. The proposed approach requires only measurements provided by traffic sensors located along the principal roads entering the zone. This reduced number of sensors are considered to be enough relevant for classifying the near future state of the traffic and moreover, their measurements can be validated through analytical/hardware redundancy. Our methodology is meant to be implemented within the framework of a wireless sensor and actuator network and is confirmed by computer simulation, including normal or abnormal traffic conditions, for the central part of the city of Timisoara-Romania. [ABSTRACT FROM AUTHOR]

Vehicle classification is an important traffic parameter for transportation planning and infrastructure management. Length-based vehicle classification from dual loop detectors is among the lowest cost technologies commonly used for collecting these data. Like many vehicle classification technologies, the dual loop approach works well in free flow traffic. Effective vehicle lengths are measured from the quotient of the detector dwell time and vehicle traversal time between the paired loops. This approach implicitly assumes that vehicle acceleration is negligible, but unfortunately at low speeds this assumption is invalid and length-based classification performance degrades in congestion. To addresses this problem, we seek a solution that relies strictly on the measured effective vehicle length and measured speed. We analytically evaluate the feasible range of true effective vehicle lengths that could underlie a given combination of measured effective vehicle length, measured speed, and unobserved acceleration at a dual loop detector. From this analysis we find that there are small uncertainty zones where the measured length class can differ from the true length class, depending on the unobserved acceleration. In other words, a given combination of measured speed and measured effective vehicle length falling in the uncertainty zones could arise from vehicles with different true length classes. Outside of the uncertainty zones, any error in the measured effective vehicle length due to acceleration will not lead to an error in the measured length class. Thus, by mapping these uncertainty zones, most vehicles can be accurately sorted to a single length class, while the few vehicles that fall within the uncertainty zones are assigned to two or more classes. We find that these uncertainty zones remain small down to about 10 mph and then grow exponentially as speeds drop further. Using empirical data from stop-and-go traffic at a well-tuned loop detector station the best conventional approach does surprisingly well; however, our new approach does even better, reducing the classification error rate due to acceleration by at least a factor of four relative to the best conventional method. Meanwhile, our approach still assigns over 98% of the vehicles to a single class. [ABSTRACT FROM AUTHOR]

Pavements were instrumented with inertial sensors, and the possibility of estimating the speed of a passing vehicle was investigated numerically and experimentally from the measurements of two embedded accelerometers. The sensors were spaced apart in the travel direction, and subsequently the speed was directly related to the time delay between the received signals. No assumption was made regarding the vehicle and pavement properties. Model accelerations were presented, studied, and contrasted against field measurements; the latter were shown to be dominated by random vibration sources. Two calculation techniques were offered and applied to handle the noisy data. The first was based on time-centroids, and the second was based on cross-correlation with kernel presmoothing. The overall concept is deemed promising not only for inferring speeds but also for extracting additional traffic characteristics such as axle spacing and relative axle load distributions. [ABSTRACT FROM AUTHOR]

The rapid-growth of smartphones with embedded navigation systems such as GPS modules provides new ways of monitoring traffic. These devices can register and send a great amount of traffic related data, which can be used for traffic state estimation. In such a case, the amount of data collected depends on two variables: the penetration rate of devices in traffic flow ( P ) and their data sampling frequency ( z ). Referring to data composition as the way certain number of observations is collected, in terms of P and z , we need to understand the relation between the amount and composition of data collected, and the accuracy achieved in traffic state estimation. This was accomplished through an in-depth analysis of two datasets of vehicle trajectories on freeways. The first dataset consists of trajectories over a real freeway, while the second dataset is obtained through microsimulation. Hypothetical scenarios of data sent by equipped vehicles were created, based on the composition of data collected. Different values of P and z were used, and each unique combination defined a specific scenario. Traffic states were estimated through two simple methods, and a more advanced one that incorporates traffic flow theory. A measure to quantify data to be collected was proposed, based on travel time, number of vehicles, penetration rate and sampling frequency. The error was below 6% for every scenario in each dataset. Also, increasing data reduced variability in data count estimation. The performance of the different estimation methods varied through each dataset and scenario. Since the same number of observations can be gathered with different combinations of P and z , the effect of data composition was analyzed (a trade-off between penetration rate and sampling frequency). Different situations were found. In some, an increase in penetration rate is more effective to reduce estimation error than an increase in sampling frequency, considering an equal increase in observations. In other areas, the opposite relationship was found. Between these areas, an indifference curve was found. In fact, this curve is the solution to the optimization problem of minimizing the error given any fixed number of observations. As a general result, increasing sampling frequency (penetration rate) is more beneficial when the current sampling frequency (penetration rate) is low, independent of the penetration rate (sampling frequency). [ABSTRACT FROM AUTHOR]

Highlights: [•] Smartphone software tools have been developed for road inventories. [•] It provides a low-cost option for different types of roads. [•] This method is very useful in those instances in which a rapid response is critical. [•] GPS, camera and other smartphone sensors have been used. [ABSTRACT FROM AUTHOR]

Abstract: In one of the very first papers on traffic flow theory back in 1952, Wardrop presented the difference between the space mean speed (SMS) and the time mean speed (TMS) of a group of traveling vehicles, and derived a relationship suitable for estimating TMS, given SMS and the speed variance over SMS. As time goes by, traffic practitioners have tended towards computing TMS instead of SMS, mainly when using double loop detectors, and nowadays this is the usual practice in traffic management centers. Therefore, the useful relationship between TMS and SMS should go the other way around in relation to Wardrop’s. Recently, the complementary relationship, suitable for estimating SMS from TMS and the speed variance over TMS, has been proved. However this is not enough, as speed variance is usually not available. The present paper develops a probabilistic method to estimate SMS from TMS without the previous knowledge of speed variance and only using the usual time aggregations of double loop detector data. The main assumption of the method – the normality of vehicle speed distribution – is discussed and a formulation to obtain the expected error of the estimation is derived. The results obtained with test data from the AP-7 highway, near Barcelona in Spain, show that the developed methodology is able to estimate SMS with an average relative error as low as 0.5%. [ABSTRACT FROM AUTHOR]

Abstract: This paper introduces an online pedestrian crossing detection system that uses pre-existing traffic-oriented video-sensors which, at regular intervals, provide coarse spatial measurements on areas along a crosswalk. Pedestrian crossing detection is based on the recognition of occupancy patterns induced by pedestrians when they move on the crosswalk. In order to improve the ability of non-dedicated sensors to detect pedestrians, we introduce an evidential-based data fusion process that exploits redundant information coming from one or two sensors: intra-sensor fusion uses spatiotemporal characteristics of the measurements and inter-sensor fusion uses redundancy between the two sensors. As part of the EU funded TRACKSS project on cooperative advanced sensors for road traffic applications, real data have been collected on an urban intersection equipped with two cameras. The results obtained show that the data fusion process enhances the quality of occupancy patterns obtained and leads to high detection rates of pedestrian crossings with multi-purpose sensors in operational conditions, especially when a secondary sensor is available. [Copyright &y& Elsevier]

Abstract: Effective integration of vision and inertial sensing can be used to overcome the classical issue of inertial divergence in inertial systems over time. However, for such integration, two types of calibration need to be performed, namely, (a) calibration to estimate the intrinsic properties of the vision cameras, such as the focal length and lens distortion parameters, and (b) determination of the transformation between the camera and the inertial system. While there are a variety of approaches to calibrate a camera optically, only a few accomplishments have been reported on calibration of cameras with inertial systems. Even the latter ones have been developed under indoor conditions. Calibration of a two sensor system under indoor conditions does not provide an appropriate and practical transformation for use in outdoor maneuvers due to invariable differences between outdoor and indoor conditions. Also, use of custom calibration objects in outdoor operational conditions is not feasible due to larger field of view that requires relatively large calibration object sizes. Hence calibration becomes a critical issue particularly if the integrated system is used in Intelligent Transportation Systems applications. In such cases it is essential that the two sensor system be calibrated in an outdoor setting in the final configuration of the vehicle. This paper introduces a calibration technique to determine the optimized transformation between the inertial and vision sensor systems in an outdoor setting. The derived intrinsic properties and the transformation between individual sensors are verified during two separate test runs on a section of an actual roadway. Finally, on a third roadway section the inertial and converted vision data are successfully compared with data from a manual survey performed. [Copyright &y& Elsevier]

Abstract: Timely and accurate incident detection is an essential part of any successful advanced traffic management system. The complex nature of arterial road traffic makes automated incident detection a real challenge. Stable performance and strong transferability remain major issues concerning the existing incident detection algorithms. A new arterial road incident detection algorithm TSC_ar is presented in this paper. In this algorithm, Bayesian networks are used to quantitatively model the causal dependencies between traffic events (e.g. incident) and traffic parameters. Using real time traffic data as evidence, the Bayesian networks update the incident probability at each detection interval through two-way inference. An incident alarm is issued when the estimated incident probability exceeds the predefined decision threshold. The Bayesian networks allow us to subjectively build existing traffic knowledge into their conditional probability tables, which makes the knowledge base for incident detection robust and dynamic. Meanwhile, we incorporate intersection traffic signals into traffic data processing. A total of 40 different types of arterial road incidents are simulated to test the performance of the algorithm. The high detection rate of 88% is obtained while the false alarm rate of the algorithm is maintained as low as 0.62%. Most importantly, it is found that both the detection rate and false alarm rate are not sensitive to the incident decision thresholds. This is the unique feature of the TSC_ar algorithm, which suggests that the Bayesian network approach is advanced in enabling effective arterial road incident detection. [Copyright &y& Elsevier]