Search

Buckling instability refers to a significant limit on the structures with I-section members, which causes severe decreasing of critical buckling load. Many mechanisms and techniques have been developed to increase the loading capacity of I-section structures, e.g., using composite materials or changing web geometry. This study aims at theoretically investigating the effect of geometry on the buckling capacity of wood composite I-beams with sinusoidal corrugated web. Experiments and numerical simulations are carried out to validate the theoretical predictions. The presented model is also reduced to flat web to validate with an existing study. Good agreements are observed from the validations. Parametric study is conducted to indicate the effects of web geometry on the critical buckling load. A significant increasing of buckling load (minimum 17.7%) is obtained between flat and sinusoidal web I-beams. Sensitivity study is carried out to evaluate the influences of web thickness, beam length and beam height on the loading capacity of sinusoidal I-beams. Optimal design is conducted to investigate the impact of the ratios of wavelength-to-beam length ( a L ) and wave amplitude-to-flange width ( A T ) on the critical buckling load and volume of wood corrugated I-beams. The findings in this study can be further used as guidance for the design of composite I-beams with sinusoidal corrugated web. [ABSTRACT FROM AUTHOR]

Many authors in the literature agreed that the flow theory of plasticity either fails to predict buckling or overestimates plastic buckling stresses and strains of plates and shells while the deformation theory succeeds in forecasting buckling and provides estimates that are more in line with the experimental results. Following a previous study by the same authors focused on compressed cylinders, the present work aims to investigate the reasons for the discrepancy between the flow and deformation theory predictions in the case of cylinders subjected to combined axial tensile load and increasing external lateral pressure. To this end, geometrically nonlinear finite-element calculations of selected cylindrical shells using both the flow theory and the deformation theory of plasticity have been conducted, and the results are compared with some accurate physical test results and with numerical results obtained by other authors using the code BOSOR5. It is found, contrary to common belief, that very good agreement between numerical and test results can be obtained in the case of the flow theory of plasticity. The reasons underlying the apparent plastic buckling paradox are discussed in detail. [ABSTRACT FROM AUTHOR]