Search

Cyclic voltammograms are key to much of the accumulated understanding of the nature of electrochemical interfaces; however, they provide no direct information on the atomic structure of the interfa...

Corrosion of copper is an expensive degradation process of materials in engineered infrastructures and in various technical applications. It is also an important factor in the geological disposal o...

Understanding the reactivity of the cathode surface is of key importance to the development of batteries. Here, density functional theory is applied to investigate the oxidative decomposition of the electrolyte component, ethylene carbonate (EC), on layered LixMO2 oxide surfaces. We compare adsorption energy trends of atoms and small molecules, on both surface oxygen and metal sites, as a function of the Li content of the surface. The oxygen sites are identified as the reactive site for the electrolyte oxidation reaction (EOR). We report reaction energies and NEB-calculated kinetic barriers for the initial oxidative decomposition of EC, and correlate both with the reaction energy of hydrogen adsorption on oxygen. The hydrogen adsorption energy scales with the distance between the Fermi level and the O-2p band center. We expect this model of the EOR to be valid for other organic electrolytes and other Li metal oxide surfaces, due to its simplicity, and the model leads to simple design principles for protective coatings.

Inert ion doping is a possible method to modify electrical conductivity and catalytic activity of transition-metal oxide electrocatalysts. Despite the importance of dopants, little is known about the underlying mechanisms for the change of the system properties. We have performed density functional theory calculations to investigate the influence of different valent ions on the O2 evolution reaction activity of β-MnO2 and Mn2O3. While Mn2O3 is unaffected by dopants, β-MnO2 is strongly affected by ions placed in a subsurface position. Doping does not affect the ion charge at the active site, but instead it effects the bond character. This is concluded through an analysis of the density overlap regions indicator and the density of states showing that the partially covalent nature of the bonds in β-MnO2 is responsible for the changes in the adsorbate binding energies. This mechanism is not active in the mostly ionic Mn2O3. These results highlight the need to explicitly consider the detailed bonding situation...

We have calculated the electrical conductivity of the solid oxide fuel cell (SOFC) cathode contact material La1–xSrxCoO3−δ at 900 K. Experimental trends in conductivity against x, and against δ for fixed x, are correctly reproduced for x ≲ 0.8. Furthermore, we have studied the chemistry of neutral and charged intrinsic and extrinsic defects (dopants) in La0.5Sr0.5CoO3 and have calculated the conductivity of the doped systems. In particular, we find that doping with Sm on the La site should enhance the conductivity, a prediction that is subsequently confirmed by electrical conductivity measurements.

The paper compares photoelectrocatalytic activity and selectivity of nanocrystalline anatase dominated by {110}, {101}, and {001} faces in photo(electro)catalytic water splitting. Although the anodic half-reaction of water splitting—oxygen evolution—dominates the overall photoelectrochemical behavior of the photoexcited anatase, simultaneous reduction under photoelectrochemical conditions is also observed on some anatase faces. The activity of individual facets in anodic half-reaction of water splitting (oxygen evolution) increases in the order {101} < {110} < {001}. The increasing oxidation activity tracks the tendency of the surface to generate the OH• radical producing intermediates (H2O2, ozone) on the trapped hole states. The activity in reduction processes increases in the reversed order. Particularly, the reduction activity of the {101} oriented anatase can be attributed to pronounced hydrogen evolution by a charge transfer of photogenerated electrons. The observed trends agree with DFT-based model...

We present an atomic-scale model of the electrochemical interface, which unfolds the effects of pH and electrode potential using a generalized computational hydrogen electrode. The liquid structure of the solvent is included with the use of ab initio molecular dynamics to sample thousands of microstates with varying numbers of protons and electrons. The grand canonical probability weight function at constant pH and electrode potential is calculated a posteriori. The only inputs to the model are the fundamental assumptions of an equilibrated solvent, charge neutrality of the interface, and the dimensions of the system. The structures are unbiased outputs, and several atomic-scale quantities are calculated for our model system, water/Au(111), as weighted averages. We present the potentials of zero charge, Gibbs isotherms, and differential capacities as a function of pH. The potential of maximum entropy is also calculated, which to our knowledge has not previously been done with any first-principles method. ...

The structure of an electrochemical interface is not determined by any external electrostatic field, but rather by external chemical potentials. This paper demonstrates that the electric double layer should be understood fundamentally as an internal electric field set up by the atomic structure to satisfy the thermodynamic constraints imposed by the environment. This is captured by the generalized computational hydrogen electrode model, which enables us to make efficient first-principles calculations of atomic scale properties of the electrochemical interface.

There are known errors in oxidation energies of transition metal oxides caused by an improper treatment of their d-electrons. The Hubbard U is the computationally cheapest addition one can use to capture correct reaction energies, but the specific Hubbard U oftentimes must be empirically determined only when suitable experimental data exist. We evaluated the effect of adding a calculated, linear response U on the predicted adsorption energies, scaling relationships, and activity trends with respect to the oxygen evolution reaction for a set of transition metal dioxides. We find that applying a U greater than zero always causes adsorption energies to be more endothermic. Furthermore, the addition of the Hubbard U greater than zero does not break scaling relationships established without the Hubbard U. The addition of the calculated linear response U value produces shifts of different systems along the activity volcano that results in improved activity trends when compared with experimental results.

Porphyrin-like metal-functionalized graphene structures have been investigated as possible catalysts for CO2 and CO reduction to methane or methanol. The late transition metals (Cu, Ag, Au, Ni, Pd, Pt, Co, Rh, Ir, Fe, Ru, Os) and some p (B, Al, Ga) and s (Mg) metals comprised the center of the porphyrin ring. A clear difference in catalytic properties compared to extended metal surfaces was observed owing to a different electronic nature of the active site. The preference to bind hydrogen, however, becomes a major obstacle in the reaction path. A possible solution to this problem is to reduce CO instead of CO2. Volcano plots were constructed on the basis of scaling relations of reaction intermediates, and from these plots the reaction steps with the highest overpotentials were deduced. The Rh–porphyrin-like functionalized graphene was identified as the most active catalyst for producing methanol from CO, featuring an overpotential of 0.22 V. Additionally, we have also examined the hydrogen evolution and o...

Direct methanol fuel cells are a key enabling technology for clean energy conversion. Using density functional theory calculations, we study the methanol oxidation reaction on model electrodes. We discuss trends in reactivity for a set of monometallic and bimetallic transition metal surfaces, flat and stepped, which includes platinum-based alloys with ruthenium, tin, and copper, as well as nonprecious alloys, overlayer structures, and modified edges. A common lower bound on the overpotential is estimated (ca. 0.3 V). A model for bifunctional alloys is employed to investigate the nature of the active sites on the surface and to screen for novel bimetallic surfaces of enhanced activity. We suggest platinum copper surfaces as promising anode catalysts for direct methanol fuel cells.

Cyclic voltammetry is a fundamental experimental method for characterizing adsorbates on electrochemical surfaces. We present a model for the electrochemical solid–liquid interface, and we simulate the linear sweep voltammogram of the electrochemical oxidation of H2O on Pt(111) and Pt3Ni(111), based on kinetic and thermodynamic parameters computed by Density Functional Theory (DFT) and the dynamics of the system solved through Monte Carlo-based methods. The model predicts onset of OH and O formation in good agreement with voltammetric and ex situ XPS experiments.

The oxidation and photo-oxidation of water on the rutile TiO2(110) surface is investigated using density functional theory (DFT) calculations. We investigate the relative stability of different surface terminations of TiO2 interacting with H2O and analyze the overpotential needed for the electrolysis and photoelectrolysis of water. We found that the most difficult step in the splitting of water process is the reaction of a H2O molecule with a vacancy in the surface to form an adsorbed hydroxyl group (OH*). Comparison to experiment shows that the computed overpotential for O2 evolution (0.78 V) is available under the experimental conditions required for both oxygen and hydrogen evolution.

On the basis of density functional theory calculations, we compare the free energies of key intermediates in the water splitting reaction over transition metal oxide surfaces to those of the Mn cluster in photo system II. In spite of the very different environments in the enzyme system and on the inorganic catalyst surface of an acidic electrolysis cell, the thermochemical features of the catalysts can be directly compared. We suggest a simple test for a thermochemically optimal catalyst. We show that, although both the RuO2 surface and the Mn cluster in photo system II are quite close to optimal, the biological catalyst appears to be best.

Density functional theory calculations have been performed for the three elementary steps−Tafel, Heyrovsky, and Volmer−involved in the hydrogen oxidation reaction (HOR) and its reverse, the hydrogen evolution reaction (HER). For the Pt(111) surface a detailed model consisting of a negatively charged Pt(111) slab and solvated protons in up to three water bilayers is considered and reaction energies and activation barriers are determined by using a newly developed computational scheme where the potential can be kept constant during a charge transfer reaction. We determine the rate limiting reaction on Pt(111) to be Tafel−Volmer for HOR and Volmer−Tafel for HER. Calculated rates agree well with experimental data. Both the H adsorption energy and the energy barrier for the Tafel reaction are then calculated for a range of metal electrodes, including Au, Ag, Cu, Pt, Pd, Ni, Ir, Rh, Co, Ru, Re, W, Mo, and Nb, different facets, and step of surfaces. We compare the results for different facets of the Pt electrode...