Search

Nearly 700,000 total hip arthroplasties (THAs) are annually performed in North America, costing the healthcare system$15 billion and creating over 5 million tons of waste. This study aims to (1) assess satisfaction of current THA setup; (2) determine economic cost, energy cost, and waste cost of current setup and apply lean methodology to improve efficiency; and (3) design and test "Savings through Lowering of Instrumentation Mass (SLIM) setup" based on lean principles and its ability to be safely implemented into practice.A Needs Assessment Survey was performed. After review and surgeon input, the "SLIM" set was designed, significantly reducing redundancy. Eighty patients were randomized to either Standard or SLIM setup. Operating room time, blood loss, perioperative adverse events and complications, cost/case, instrument weight (kg/case), total waste (kg/case), case setup time, and number of times and number of extra trays required were compared between groups.The SLIM setup was associated with the following savings: Cost = -$408.19/case; Energy = -7.16 kWh/case; Waste = -1.61 kg/case; Trays = -6 (758 kg/case). No differences in operating room time, blood loss, and complication rate were detected (P.05) between groups. Setup time was significantly shorter with SLIM (P.05) and extra instrumentation was opened in5% of cases.A more "minimalist approach" to THA can be safely implemented. The SLIM setup is efficient and has been openly accepted by our allied staff. Such setup can lead to 1,610 kg reduction in waste, 7,160 kWh, and $408,190 in savings per 1,000 THAs performed.

Optimum management for the elderly acetabular fracture remains undefined. Open reduction and internal fixation (ORIF) in this population does not allow early weight-bearing and has an increased risk of failure. This study aimed to define outcomes of total hip arthroplasty (THA) in the setting of an acetabular fracture and compared delayed THA after acetabular ORIF (ORIF delayed THA) and acute fixation and THA (ORIF acute THA).All acetabular fractures in patients older than 60 years who underwent ORIF between 2007 and 2018 were reviewed (n = 85). Of those, 14 underwent ORIF only initially and required subsequent THA (ORIF delayed THA). Twelve underwent an acute THA at the time of the ORIF (ORIF acute THA). The ORIF acute THA group was older (81 ± 7 vs 76 ± 8; P.01) but had no other demographic- or injury-related differences compared with the ORIF delayed THA group. Outcome measures included operative time, length of stay, complications, radiographic assessments (component orientation, leg-length discrepancy, heterotopic ossification), and functional outcomes using the Oxford Hip Score (OHS).Operative time (P = .1) and length of stay (P = .5) for the initial surgical procedure (ORIF only or ORIF THA) were not different between groups. Four patients had a complication and required further surgeries; no difference was seen between groups. Radiographic assessments were similar between groups. The ORIF acute THA group had a significantly better OHS (40.1 ± 3.9) than the ORIF delayed THA group (33.6 ± 8.5) (P = .03).In elderly acetabulum fractures, ORIF acute THA compared favorably (a better OHS, single operation/hospital visit, equivalent complications) with ORIF delayed THA. We would thus recommend that in patients with risk factors for failure requiring delayed THA (eg, dome or roof impaction) that ORIF acute THA be strongly considered.

Background The anterior approach (AA) to total hip arthroplasty (THA) has advantages for patients and healthcare providers. However, some studies have reported high rates of adverse events when introducing AA-THA. This was not consistent with our center’s experience, where 4 senior surgeons safely introduced AA-THA into practice. The purpose of this study is to define the adverse event rates associated with the introduction of AA-THA by a group of experienced surgeons at a single tertiary care center and define experiential factors that may modify adverse event rates. Methods Retrospective review of prospectively collected data for an observational cohort of all patients undergoing a THA between 2006 and 2017 was conducted. Four senior surgeons at a single institution operated on 1087 primary elective hips using AA-THA. Results Between 2006 and 2016, AA-THA rose from 1.5% to 53.2% of annual THA. Adverse events included intraoperative events, early postoperative periprosthetic fractures, dislocation, implant failure, early infection, and wound complications. We observed an overall 90-day adverse event rate of 6.4% (of 1087 hips). The adverse event rate was 41.6% (of 12 hips) in the first 12 months of the study period and 3.6% (of 166 hips) in the final 12 months of the study period reviewed. Sixty hips (5.5%) required a reoperation with or without revision of components, 1 (8.3%) in the first 12 months of the study period and 1 (0.6%) in the final 12 months of the study period. Infection and wound complications were the most common causes of reoperation at 1.8% for all cases (20 hips). Higher rates of adverse events are associated with early procedures (n ≤ 15) for all surgeons but showed no statistically significant impact on 5-year survival rate. Conclusion Our experience demonstrates that AA-THA can be introduced into practice with an acceptable adverse event rate when compared with other approaches to THA. As expected the incidence of adverse events is higher in the early part of the learning curve. Surgeon mentoring in the first 20 cases should be considered to minimize risk of adverse events. Level of Evidence Therapeutic Level III.

Background Added modular junction has been associated with implant-related failures. We report our experience with a titanium-titanium modular neck-stem interface to assess complications, possible clinical factors influencing use of neck modularity, and whether modularity reduced the incidence of dislocation. Methods A total of 809 total hip arthroplasties completed between 2005 and 2012 from a prospectively collected database were reviewed. The mean follow-up interval was 5.7 years (3.3-10.3 years). Forty-five percent were male (360 of 809), and 55% were female (449 of 809). All stems were uncemented PROFEMUR TL (titanium, flat-tapered, wedge) or PROFEMUR Z (titanium, rectangular, dual-tapered) with a titanium neck. Results Increased modularity (anteverted/retroverted and anteverted/retroverted varus/valgus (anteverted/retroverted + anteverted/retroverted varus/valgus) was used in 39.4% (135 of 343) of cases using the posterior approach compared with 6.8% (20 of 293) of anterior and 23.7% (41 of 173) of lateral approaches. Four males sustained neck fractures at a mean of 95.5 months (69.3-115.6 months) after primary surgery. Overall dislocation rate was 1.1% (9 of 809). The posterior approach had both the highest utilization of increased modularity and the highest dislocation rate (2.3%), of which the most were recurrent. The anterior (0.3%) and lateral (0%) approaches had lower dislocation rates with no recurrences. Conclusion At a mean 5.7 years, our experience demonstrates a low neck fracture (0.5%) and a low dislocation rate (1.1%). Use of increased modularity may not improve dislocation risk for the posterior approach. Continued surveillance of this group will be necessary to determine long term survivorship of this modular titanium implant.

The goal of this study is to evaluate serum levels of chromium (Cr), cobalt (Co), and titanium (Ti) within the first two years following total hip arthroplasty using a Ti modular neck system. Twenty-five patients were randomized to a metal-on-metal (MoM) bearing with an all CoCr shell, and the remaining 25 received a metal-on-polyethylene (MoP) with a Ti shell. Serum levels demonstrated increases for Cr, Co, and Ti at 1 year (P < .001). MoM had similar Ti levels to MoP hips at 1 year (P=0.11) but lower at 2 years (P=0.03). Results suggest that the passive corrosion (i.e., chemical, pitting, and crevice corrosion) of exposed non-articular metal surfaces may be a greater source of ions than the neck-stem or head-neck interfaces.