Search

Metal-organic frameworks (MOFs) as a peroxidase mimic have been integrated with glucose oxidase (GOx) to achieve one-step glucose detection. However, limited by the loading amount of GOx, the performances of the developed glucose sensing assays still remain to be further improved to meet sensing requirements in diverse biological samples. Herein, with Fe3+ as the metal ion and 2-amino-benzenedicarboxylic acid as a ligand, a fluorescent Fe-based organic framework (NH2-MIL-101) with peroxidase-like activity was synthesized. Due to the large specific surface area (791.75 m2 g-1), 68 μg mg-1 GOx could be immobilized through the amidation coupling reaction, and the product was designated GOx@NH2-MIL-101. With OPD as the substrate, Gox@NH2-MIL-101 achieved highly efficient biomimetic cascade catalysis for one-step glucose detection through an inner filter effect: upon reacting with glucose, GOx@NH2-MIL-101 catalytically oxidized glucose using dissolved O2, and the produced H2O2 concurrently oxidized o-phenylenediamine (OPD) to oxidized OPD (oxOPD), accompanied by the fluorescence of GOx@NH2-MIL-101 at 456 nm being quenched and that of oxOPD at 565 nm being enhanced. With the fluorescent ratio F565/F456 used as a readout signal, a wide linear range of 0.1-600 μM was obtained, and the detection limit was 0.0428 μM. Based on the excellent selectivity and high stability of GOx@NH2-MIL-101, the developed assay was successfully applied to glucose detection in human serum and saliva, presenting potential applications in diverse biological samples and even medical diagnosis.

Here, we found that Thioflavin T (ThT) could specifically bind with a G-GGG unit (named as "Guanine Island") in double stranded DNA (ds-DNA). Through stacking with G base via hydrogen bonds, the rotation of ThT was restricted and concurrently its planarization was enforced. Such a binding mode produced a significantly enhanced ThT fluorescence. Based on this discovery, with ThT as a lighting-up probe for "Guanine Island" in ds-DNA, the fluorescent detection of single-nucleotide mutation (C mutation) was investigated. With C base in target DNA mutating to G, A or T and further hybridizing with a probe DNA containing a GGG unit at the mutated point, ds-DNA including G-GGG, A-GGG or T-GGG islands was formed, respectively. After binding with ThT, C mutation was clearly recognized. With C mutating to G as an example, the detection limit was as low as 3 nM. Importantly, the developed assay could be applied to recognize C mutating to G in a DNA sequence related to dilated cardiomyopathy for diluted human serum. As a sensing unit ("Guanine Island" in ds-DNA lighting up ThT), it is expected to be applied for various biological or environmental systems.

The design and testing of integrated colorimetric microarray immunochips (immuno-microarrays) are reported for the quantitation and direct visual determination of multiple illicit drugs (e.g., morphine, cocaine and amphetamine) in body fluids. Such an immuno-microarray platform utilizes a competitive immunoassay format, which is based on silver staining for quantitative detection and multicolor staining for direct visualization (i.e., qualitative identification) of analytes present in the sample. Under optimized conditions, the dynamic response ranges of 3.7–1000, 1.1–300 and 1.5–300 ng mL−1 were achieved for amphetamine, cocaine, and morphine, respectively, which are wider towards low concentrations than those of standard enzyme-linked immunosorbent assay (ELISA) tests. The limits of detection (LODs) for morphine, cocaine, and amphetamine were determined to be 1.5 ± 0.1, 1.1 ± 0.1 and 3.7 ± 0.2 ng mL−1, respectively in oral fluids, which meet government regulations for law enforcement. The obvious advantages of multiplexing, simultaneous visual recognition, and accurate quantitation make the on-site detection feasible, confirming that such a colorimetric immuno-microarray holds promise for practical applications.

Identifying the species and concentrations of antioxidants is really important because antioxidants play important roles in various biological processes and numerous diseases. Compared with an individual sensor detecting a single antioxidant with limited specificity, a sensor array could simultaneously identify various antioxidants, in which 3-5 types of nanomaterials with peroxidase-like activity are absolutely necessary. Herein, as a single-atom nanozyme, Fe-N/C with oxidase-mimicking activity was applied to construct a triple-channel colorimetric sensor array: (1) Fe-N/C catalytically oxidized three substrates 3,3',5,5'-tetramethylbenzidine (TMB), 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) and o-phenylenediamine (OPD) to produce blue oxidized TMB (oxTMB), green oxidized ABTS (oxABTS) and yellow oxidized OPD (oxOPD), respectively; (2) with oxTMB, oxABTS and oxOPD as three sensing channels, a colorimetric sensor array was constructed for simultaneously discriminating glutathione (GSH), l-cysteine (l-Cys), ascorbic acid (AA), uric acid (UA), and melatonin (MT), even quantifying concentrations (with GSH as a model analyst). The performance of the sensor array was validated through accurately identifying 15 blind samples containing GSH, l-Cys, AA, UA and MT in buffer solution and human serum samples, and also in binary and ternary mixtures. This work proved that fabricating a single nanozyme-based sensor array was a simplified and reliable strategy for simultaneously probing multiple antioxidants.

As the performance of hairpin DNA (hpDNA)-based biosensors is highly dependent on the yield of stem-loop (hairpin) conformations, we report herein a versatile fluorometric in situ hybridization protocol for examining hpDNA self-assembled monolayers (SAMs) on popularly used biochip substrates. Specifically, the ratio of fluorescence (FL) intensities of hpDNA SAMs (in an array format) before and after hybridization was adopted as the key parameter for performing such a determination. Upon confirming the existence of mixed and tunable DNA conformations in binary deposition solutions and efficient hybridization of the hairpin strands with the target DNA via gel electrophoresis assays, we tested the fluorometric protocol for determining the coverages of hpDNA in hpDNA/ssDNA SAMs prepared on gold; its accuracy was validated by Exonuclease I (Exo I)-assisted electrochemical quantitation. To further confirm its versatility, this FL protocol was adopted for quantifying hairpin conformations formed on glass and polycarbonate (PC) substrates. The molar ratios of surface-tethered hairpin conformations on the three different substrates were all found to be proportional to but less than those in the binary deposition solutions, and were dependent on the substrate morphology. The findings reported herein are beneficial for the construction of highly efficient DNA hairpin-based sensing surfaces, which essentially facilitates the creation of hpDNA-based biosensors with optimal detection performance.

Graphene oxide (GO)-based aptasensors are currently one of the most popular sensing platforms for the simple and rapid detection of various targets. Unfortunately, the GO-based aptasensors with long aptamer strands typically show unsatisfactory performance resulting from insignificant structural transformations upon target binding. We report herein the utilization of an aptamer-truncating strategy to combat such a challenge. Taking a pre-selected anti-aflatoxin B1 (AFB1) aptamer (P-AFB1-50) as a trial system, we sequentially remove the extraneous nucleotides within the aptamer by means of circular dichroism (CD) spectroscopy and binding affinity analysis. Particularly, the ratio of the quenching constants between the GO sheets and the truncated aptamers (labelled with fluorophores) in the absence and presence of the target was determined for each of the truncated aptamers to evaluate the optimal sequence. As a result, the truncated aptamer comprising 40 nucleotides was confirmed to show the highest FL output and the best detection limit upon conjugation with GO sheets. More importantly, we demonstrated that this truncating strategy is versatile, i.e., it can be easily extended to other aptamer systems (anti-ochratoxin A (OTA) aptamer, P-OTA-61, as an example) for extraneous nucleotide identification. Impressively, the two optimal truncated aptamers can work together on GO sheets to achieve a simultaneous detection of two different mycotoxins (i.e., AFB1 and OTA) in one single test. Essentially, this research opens a new avenue for the design and testing of aptamer-/GO-based-sensing platforms for rapid, low-cost and multiplex quantification of analytical targets of interest.

Potassium ions play diverse roles in biological processes, and abnormal K(+) levels are the hallmarks of diseases. However, the potential clinical application of the developed DNA-based K(+) sensors remains a challenge due to the presence of Pb(2+) in blood samples. In this contribution, a novel colorimetric potassium sensing assay that functions in the presence of Pb(2+) is reported. This approach is based on conformational switching of a hairpin DNA structure to a G-quadruplex. Specifically, the hairpin DNA containing G-rich aptamer T30695 is exposed to successive amounts of Na(+), Pb(2+) and K(+). These cations induce formation of the corresponding metal-stabilized G-quadruplex, which acts as DNAzyme (with hemin as a cofactor) for the catalytic oxidation of ABTS by H(2)O(2). Importantly, studies presented here show that K(+) replaces Pb(2+) from the G-quadruplex to form K(+)-stabilized G-quadruplex, which differ in the catalytic behavior. With Pb(2+)-stabilized G-quadruplex as a probe, a highly sensitive and selective colorimetric detection of K(+) is achieved in the presence of Pb(2+) and excessive Na(+) (140 mM) with the detection limit of 1.9 nM. This system represents the first known DNAzyme-based colorimetric K(+) sensor, which works in the presence of Pb(2+). Finally, the sensor is successfully applied for K(+) detection in a real human serum sample containing Pb(2+).

Beyond their essential applications in portable data storage for the past 30 years, optical discs and corresponding recording/reading technologies have been extensively explored with the ultimate goal of creating novel analytical tools for on-site chemical analysis and point-of-care (POC) medical diagnosis. In particular, the disc media (CD, DVD, and BD) are proven to be inexpensive and versatile substrate materials for the preparation of various biochips and microfluidic systems; conventional computer drives and disc players are widely adapted for biochip signal reading and microscopic imaging. Herein we provide an overview of such optical disc technology-enabled analytical devices, e.g., integrated systems developed from specifically fabricated analog disks, modified optical drives, or adapted software algorithms.

Direct and rapid detection of 1-hydroxypyrene (1-OHP) is of great importance owing to its high carcinogenicity, teratogenicity and toxicity. In this study, a simple colorimetric assay for rapid determination of 1-OHP is reported, which is based on non-crosslinking aggregation of gold nanoparticles (Au NPs) induced by 1-OHP in the presence of formic acid (FA). Initially, Au NPs were synthesized with citrate as the capping agent and exhibited red color. Subsequently, the addition of FA did not cause aggregation of Au NPs, but a proton transfer process occurred from FA to carboxylic anions on the surface of Au NPs with a decreased zeta potential. The subsequent addition of 1-OHP resulted in a further decreased zeta potential and an intensely hydrophobic environment, which led to a strong and rapid non-crosslinking aggregation of Au NPs within 5 min with the color changing from red to violet blue. Based on this principle, sensitive and selective detection of 1-OHP was achieved. The detection limit was 3.3 nM. Finally, the colorimetric assay was successfully applied to detect 1-OHP in a urine sample. This strategy provides new insights into developing colorimetric methods for on-site and real-time detection of polycyclic aromatic hydrocarbons.

A microarray-format colorimetric biochip was constructed on plastic using two specially-designed DNA hairpin strands as binary probes and a binding-induced conformational switching strategy as the signal generation protocol. Coupled with single- or dual-color staining, we were able to simultaneously detect and quantitate the trace amounts of Pb(2+) and Hg(2+) in various real-world samples.