Search

Herein, a simple assembly was designed via a capillary and a funnel-like cap to achieve liquid–gas compound pendant drop (CPD) microextraction with great convenience. Due to the increased contact area and adhesion force between the capillary tip and the drop, the proposed method provides considerable flexibility in producing CPDs with different air bubble sizes. Four pesticides were chosen as model analytes to evaluate the proposed method. By using a 1 μL chlorobenzene droplet containing a 1 μL air bubble at a stirring rate of 700 rpm, a 70 to 135-fold enrichment of pesticides was obtained within 3.4 minutes. As compared with a typical SDME, the proposed method showed a 2-fold increase of enrichment factors and a 4-fold decrease of extraction time. Improvement of the extraction efficiency could be ascribed to the increased surface area of the droplet, and the thin film phenomena further improved the extraction kinetics through effective agitation. The results indicate that CPD microextraction could serve as a promising sample pretreatment method for automated high-throughput analyses in a wide variety of research areas.

In this paper, a general mode and theory of moving chelation boundary based isotachophoresis (MCB-based ITP), together with the concept of decisive metal ion (DMI) having the maximum complexation constant (lg Kmax) with the chelator, were developed from a multi-MCB (mMCB) system. The theoretical deductions were: (i) the reaction boundary velocities in the mMCB system at steady state were equal to each other, resulting in a novel MCB-based ITP separation of metal ions; (ii) the boundary directions and velocities in the system were controlled by the fluxes of chelator and DMI, rather than other metal ions; and (iii) a controllable stacking of metal ions could be simultaneously achieved in the developed system. To demonstrate the deductions, a series of experiments were conducted by using model chelator of EDTA and metal ions of Cu(II) and Co(II) due to characteristic colors of blue [Cu-EDTA](2-) and pink [Co-EDTA](2-) complexes. The experiments demonstrated the correctness of theoretical deductions, indicating the validity of the developed model and theory of ITP. These findings provide guidance for the development of MRB-based ITP separation and stacking of metal ions in biological sample matrix and heavy metal ions in environmental samples.

As two important physico-chemical parameters, the acidic and alkaline residues of protein are of evident significance for the evaluation of protein properties and the design of relevant separation and analysis. However, there is still no electrophoretic method used for the direct detection of free acidic and alkaline residues of protein. Herein, we developed the concepts of moving reaction boundary (MRB) and MRB titration, relevant MRB titration theory, and the method of microdevice electrophoresis for the determination of free acidic and alkaline residues of protein. In the MRB titration, the boundary was created with acid or alkali and target protein immobilized via highly cross-linked polyacrylamide gel (PAG). It was theoretically revealed that the number of free acidic or alkaline residues of protein was as a function of MRB displacement in the electrophoretic titration system. As a proof of concept, seven model proteins were chosen for the determination of acidic or alkaline residues of protein via MRB titration. The results showed that the numbers of free acidic and alkaline residues of proteins detected were in good agreement with those obtained from the relevant amino sequences in the NCBI database, demonstrating the feasibility of the developed concept, theory and technique. The general methodology of MRB titration has potential application for inexpensive, facilitative and informative protein structure analysis of free acidic or alkaline residues of protein.

A novel moving redox reaction boundary (MRRB) model was developed for studying electrophoretic behaviors of analytes involving redox reaction on the principle of moving reaction boundary (MRB). Traditional potassium permanganate method was used to create the boundary model in agarose gel electrophoresis because of the rapid reaction rate associated with MnO(4)(-) ions and Fe(2+) ions. MRB velocity equation was proposed to describe the general functional relationship between velocity of moving redox reaction boundary (V(MRRB)) and concentration of reactant, and can be extrapolated to similar MRB techniques. Parameters affecting the redox reaction boundary were investigated in detail. Under the selected conditions, good linear relationship between boundary movement distance and time were obtained. The potential application of MRRB in electromigration redox reaction titration was performed in two different concentration levels. The precision of the V(MRRB) was studied and the relative standard deviations were below 8.1%, illustrating the good repeatability achieved in this experiment. The proposed MRRB model enriches the MRB theory and also provides a feasible realization of manual control of redox reaction process in electrophoretic analysis.

Affinity analysis is a key biotechnique used in the fields of biology and biomedicine. Herein, we advanced the concept of moving affinity boundary (MAB) using metal ion Ni(II) and histidine (His) as the model inorganic ion and ligand, respectively, developed the simple method of MAB affinity capillary electrophoresis (MAB-ACE), and carried out the relative experiments. The experiments manifested that (a) an MAB could be created with the model metal ion and ligand; (b) the MAB-ACE could specifically capture His rather than other amino acids, or numerous metabolites in human urine; and (c) the capture had the merits of simultaneous focusing and separation to the target metabolite of His. It was further revealed that the specificity of MAB-ACE was originated from the selective affinity interaction and the effective control of affinity conditions. The analyses of His in raw urine by the MAB-ACE are in agreement with those via the standard amino acid analyzer, indicating the reliability of the developed method. Additionally, the MAB-ACE with UV detector had good sensitivity (LOD = 43 ng mL(-1), S/N = 3), 1.0-150 microM linearity and5% intra-/inter-day variations. The novel method has an evident potential application for capture of a target metabolite in complex biological sample.

A novel separation mode of isotachophoresis (ITP) was advanced for the study on the continuous moving chelation boundary (MCB) formed with EDTA and two metal ions of Co(II) and Cu(II). The experiments were performed systemically. The relevant results indicated that: (1) there were three boundaries in the whole system, viz., a sharp MCB, a wide moving substitution boundary (MSB) and a sharp complex boundary (CB); (2) within the MSB, an ion substitution reaction occurred between [Co-EDTA](2-) and Cu(II), and the reaction resulted in the release of Co(II) and EDTA from [Co-EDTA](2-) and the binding of Cu(II) with the released EDTA due to log K(Cu(II)) (= 18.80)log K(Co(II)) (= 16.31); (3) because of the novel ITP mode induced by the MSB as well as the merging of the MCB and CB, the original low concentration Co(II) and Cu(II) were chemically separated as two characteristic coloured zones of pink [Co-EDTA](2-) and blue [Cu-EDTA](2-), and the sensitivities for detection of the two metal ions were greatly enhanced. The quantitative analyses of the zone composition by ICP-AES and UV-vis spectrophotometry supported the mechanism of the novel separation mode induced by the MSB. The further theoretical and experimental results indicated that the separation mode was a novel ITP relied on moving reaction boundary (MRB), rather than a classic ITP based on the moving boundary system developed about 60 years ago. These findings provide guidance for the development of the MRB and the MCB-based ITP separation of metal ions in environmental and biological matrices.

Since 1970, a series of systematic investigations have been performed on three modes of moving reaction boundaries (MRBs), viz. moving precipitate boundary (MPB), moving neutralization boundary (MNB) and moving chelation boundary (MCB). So far, there has not been any review on them. Herein, we firstly review the MPB with respect to its velocity, product concentration, elution displacement, stacking effect, separation effect, judgment expressions and related procedures. We then make a review on the MNB about its theory, demonstration, improvement, and uses in isoelectric focusing (IEF), sample stacking, MNB-based stacking mechanisms and relevant computer simulations. We further give a review on the MCB regarding the relevant theory, verifications, and applications in EDTA-based sweeping and computer simulation. Finally, we give an outlook on the MRB study. More than 150 references are cited.