Search

Young and tectonically active chains like the Central Apennines (Italy) are featured by high structural complexity as a result of the overprint of subsequent deformational stages, making interpretation of seismotectonics challenging. The Central Apennines are characterized by the stacking of tectono-sedimentary units organized in thrust sheets. However, extensional tectonics is currently affecting the axial sector of the thrust belt, mostly expressing in extensional earthquakes. Using a large subsurface dataset acquired for hydrocarbon exploration in the region struck by the 2016–2017 Central Italy seismic sequence, we built a comprehensive 3D geological model and compared it with the seismicity. The model primarily shows a series of thrusts developed during the Miocene-Pliocene Apennines orogenesis and inherited normal faults developed during the Mesozoic extensional phase and the Miocene foreland flexural process. These normal faults were segmented and transported within the thrust sheets, and sometimes they still show a clear surface expression. The succession of tectonic stages resulted in a widespread reactivation of inherited structures, sometimes inverting their kinematics with different styles and rates, and disarticulating pre-existing configurations. Such evolution has a strong impact on the seismicity observed in the area, as demonstrated by some examples that show how the seismicity is aligned on segments of inherited faults, both compressional and extensional. Their reactivation can be explained by their favorable orientation within the current extensional stress field. Results feed the debate about the seismogenic potential of faults identified both at depth and surface, which can impact the seismic hazard of the Apennines.

In this study, we investigate the potential role played by different geological factors on the development of a thrust system. In particular our goal is to analyze how pre-existing compressional structures located in the foreland of a thrust-and-fold belt may affect the kinematics of a thrust system. We studied such circumstances both in a natural case and through analogue models. As a natural case, we selected the Central Po Plain (Italy), where the buried external fronts of the Northern Apennines and Southern Alps are very close to each other. Starting from a regional cross-section representative of this tectonic setting, we reconstructed the post-Messinian development of the Apennines thrust fronts, which includes out-of-sequence thrusting. Then, we modeled this evolution through a set of analogue experiments to evaluate the possible relationships of the out-of-sequence thrusting with the burial of the syntectonic sediments and/or the existence of the outer fronts of an opposite verging chain in its foreland. The comparison between natural case and models highlights that the presence of opposite verging thrust fronts in the foreland of a belt limits the propagation of new thrusts favoring the out-of-sequence reactivation of inner thrusts. An analysis of the study area with respect to adjacent tectonic settings, coupled with analogue models, revealed that syntectonic sedimentation as well has a role in the reactivation of the inner fronts, although secondary. In the Po Plain specific case, this implies that the presence of the buried Southern Alps fronts affects the Northern Apennines kinematics, even if the two fronts did not collide yet.

Recent seismicity in and around the Gargano Promontory, an uplifted portion of the Southern Adriatic Foreland domain, indicates active E–W strike-slip faulting in a region that has also been struck by large historical earthquakes, particularly along the Mattinata Fault. Seismic profiles published in the past two decades show that the pattern of tectonic deformation along the E–W-trending segment of the Gondola Fault Zone, the offshore counterpart of the Mattinata Fault, is strikingly similar to that observed onshore during the Eocene–Pliocene interval. Based on the lack of instrumental seismicity in the south Adriatic offshore, however, and on standard seismic reflection data showing an undisturbed Quaternary succession above the Gondola Fault Zone, this fault zone has been interpreted as essentially inactive since the Pliocene. Nevertheless, many investigators emphasised the genetic relationships and physical continuity between the Mattinata Fault, a positively active tectonic feature, and the Gondola Fault Zone. The seismotectonic potential of the system formed by these two faults has never been investigated in detail. Recent investigations of Quaternary sedimentary successions on the Adriatic shelf, by means of very high-resolution seismic–stratigraphic data, have led to the identification of fold growth and fault propagation in Middle–Upper Pleistocene and Holocene units. The inferred pattern of gentle folding and shallow faulting indicates that sediments deposited during the past ca. 450 ka were recurrently deformed along the E–W branch of the Gondola Fault Zone. We performed a detailed reconstruction and kinematic interpretation of the most recent deformation observed along the Gondola Fault Zone and interpret it in the broader context of the seismotectonic setting of the Southern Apennines-foreland region. We hypothesise that the entire 180 km-long Molise–Gondola Shear Zone is presently active and speculate that also its offshore portion, the Gondola Fault Zone, has a seismogenic behaviour.

Combined structural and geophysical investigations were carried out in the Matese Massif at the boundary between the Central and the Southern Apennines. The aim of this research was to define the structural geometry and the kinematics of Neogene deformation in order to validate the applicability of either thin-skinned or thick-skinned compressive styles in the Apennines of Italy. On the basis of two surface N–S cross-sections, integrated with recently acquired magnetotelluric data, the Matese structure appears as a single thrust sheet limited at the bottom by a low-angle thrust fault with sense-of-displacement towards the North. The structure was later deformed by footwall thrusts carrying Molise–Sannio Pelagic Basin Units and Apulian Carbonate Platform Units. The structure of the Matese Massif is composed mainly of Mesozoic carbonates of inner platform to by-pass and slope facies, separated within the thrust sheet by high-angle faults with low reverse horizontal displacement. These faults acted as normal faults in the Mesozoic and Cenozoic and controlled the carbonate facies distribution. During Neogene compression, these structures were tilted and then truncated by the basal short-cut thrust fault that cut from pre-Triassic units to Jurassic dolostone towards the foreland. Finally, Quaternary extensional tectonics dissected the whole structure with fault-related displacement values of up to 1000 m. This resulted in the present-day structural setting of the Matese Massif as a horst bounded to the SW and NE by fault-controlled basins, filled with continental deposits. This revised structural scenario is discussed within the framework of the structural style of external zones of the Apennines.

This paper focuses on the boundary area between the Central and Southern Apennines thrust belt of the Italian peninsula, which separates two different patterns of distribution of active faults and strong earthquakes along the Apennines chain. In order to reduce the remarkable lack of data on this area, part of this boundary has been investigated. The study area corresponds to the surroundings of the town of Isernia, an important centre of the Molise region, and contains the Carpino and Le Piane (CLP) intermountain Basins of Quaternary age. The research was based on unpublished data, consisting of 65 well logs drilled in the CLP Basins, integrated with detailed field surveys (scale 1:10,000), mesoscale structural analysis and aerial photograph interpretation. This study allowed to define the geometry and kinematics of the CLP Basins. They result to be asymmetric halfgrabens partially filled with fluvio-lacustrine deposits, where the sedimentation is controlled by the activity of a set of normal faults striking N30jW and NE dipping. This set of faults, which developed mainly during the Late Pleistocene–Holocene, is about 10 km long and is located close to the northwestern end of the Boiano Basin extensional Fault System. The average slip rate calculated for part of the Holocene for one of the recognised faults ranges from 0.75 to 1.00 mm/year. The identification of the active CLP Basins Fault System partially fills the gap of data at the boundary between the Central and Southern Apennines. From a more general point of view, we hypothesise that this boundary might be regarded as a ‘‘persistent segment boundary’’, forming a long-term barrier to the propagation of rupture of active fault systems. Under this perspective, a redefinition of the seismic zonation of Italy for the study area is suggested. D 2002 Elsevier Science B.V. All rights reserved.

The Abruzzi–Molise sector in the Central Apennines is a part of a fold and thrust belt that has been deforming since the Late Cretaceous as a result of collision tectonics between the European and Adriatic plates. The superposition of different deformational styles highly reworked the originally complex palaeogeography of this portion of the southern Tethyan margin. Analogue modelling has been performed on thrusting mechanisms in the Abruzzi–Molise area in order to (1) reduce the number of admissible hypotheses regarding palaeogeographic setting, and (2) define thrusting mechanics. Both of these goals are crucial for hydrocarbon exploration purposes. The sandbox apparatus used to simulate the undeformed passive margin consisted of a thin compartment juxtaposed against a thick one along a linear boundary having variable geometries and mechanical stratigraphy; a rigid but mobile backstop was used to deform the stratigraphy in a Coulomb thrust wedge. Results from six experiments show that the geometric relationships between different structural units depend on the distribution of palaeogeographic domains. These domains are defined by mechanical and/or geometrical parameters, such as the orientation between the maximum compression direction and the palaeogeographic boundary, the mechanical stratigraphy and the thickness of the successions reproduced in the models. The present-day tectonic styles and Meso–Cenozoic palaeogeography of the Abruzzi–Molise area are discussed in terms of the mechanisms and structures analysed through the models.

The Abruzzo-Molise-Sannio region is part of the Central Apennines foreland fold and thrust belt, a structure that formed during the Neogene as a result of the continental collision between the European and Adria plates. Certain areas of this crust experienced anomalously high temperatures due to deep burial, while others did not. This burial has been investigated using optical indicators of organic matter (OM) maturity and clay mineralogy. The maximum depths of burial of Tertiary surface sequences have been established based on the vitrinite reflectance (Ro) and thermal alteration index (TAI) of OM dispersed in synorogenic sediments and from clay mineralogy of pre-thrusting clayey deposits. The synorogenic deposits show low levels of organic maturity having Ro values less than 0.6% indicating early mature to mid-mature hydrocarbon generation. The pre-thrusting deposits are shales characterised by a very high percentage of clay minerals with lesser amounts of quartz, K-feldspar, plagioclase and calcite. The dominant minerals are highly smectitic interstratified illite/smectite (RIS). Both Ro and I/S ratios were used to calibrate burial and thermal evolution of this chain sector by numerical modelling. The results indicate that the structural units which outcrop in the study area (particularly the Molise Unit) were never overthrust by significant thicknesses of rocks during mountain building, at least before Pliocene times; the hypothesis that more internal units overthrust the presently exposed units also seems to be unlikely.