Search

International audience; Quantitative localization of metals in biological tissue sections is critical to obtain insight into metal toxicity mechanisms or their beneficial characteristics. This study presents the development of a quantitative LA-ICP MS bioimaging methodology based on the polymer film strategy and internal standardization. To maximize the number of elements mapped, an aqueous soluble polymer (dextran) was selected. Among the elements studied, the great majority (eight out eleven), i.e., Co, Ni, Cu, Zn, Se, Mo, Cd and Pt, exhibited linear regression after LA-ICP MS analysis of metal-spiked polymer standards. Methodology performances were carefully assessed as a function of the three internal standards (In, Rh and Ir) considered, the analytical operational conditions (ICP power, addition of O 2 to ICP, and laser fluency) and the thickness of the biological tissue section. The results indicated that three groups (Co, Mo; Ni, Cu, Pt; and Zn, Se, Cd) of elements could be distinguished from their analytical response as a function of analytical conditions and the internal standard. These different element behaviors appeared to be mainly First Ionization Potential dependent (FIP). For elements with lower FIP (Co, Ni, Cu, Mo and Pt), differential responses due to carbon load in the ICP MS plasma could be efficiently corrected as a function of analytical conditions. Matrix effects were more pronounced for higher FIP elements (i.e., Zn, Cd and Se), and analysis of

International audience; A coupling of thin layer chromatography with laser ablation ICP SF MS was developed for the fractionation of Ni, V, Fe and S in crude oil and its fractions (saturate, aromatic, resin and asphaltene). The detection limits were 18 ng g -1 and 23 ng g -1 for nickel and vanadium, respectively, and a sample could be characterized in terms of the metal distribution as a function of species polarity within 10 min. The method was used to characterize the metal distribution in crude oils of different origins and their different fractions. © 2012 Elsevier B.V. All rights reserved.

International audience; A novel multiresidue method was developed for the simultaneous analysis of 34 organochlorines, including chlorobenzenes, chlorophenols, chlorinated hydrocarbons and chlorinated olefins, in soil by GC-MS, using a QuEChERS-based extraction. The conventional QuEChERS method was optimised and, for the first time, the use of a non miscible-water solvent was required. The method was compared to ASE extraction, versatile technique widely used for the soils' extraction and QuEChERS-based method was shown to be the most efficient in terms of recoveries, simplicity and rapidity. For ASE, recoveries between 42% and 85% were obtained for the majority of the compounds. However, due to the high pressure, all volatile compounds were lost. In opposite, QuEChERS extraction allowed detection and quantification of all the compounds with recoveries between 60% and 100%. Moreover, no additional clean up by dispersive SPE on PSA was necessary, which allowed reducing the cost of the analysis. Performance of the method was assessed. The method was linear over the range of concentration of 10-5000 μg kg−1. Precision, expressed as intra-day precision and inter-day variation was verified at three concentrations. Limits of detection were from 2 to 50 μg kg−1 and limits of quantification from 7 to 170 μg kg−1 for the majority of the compounds (chlorobenzenes and chlorinated hydrocarbons and olefins), except for chlorophenols. The method was further applied to different soils coming from a contaminated industrial site, where a new environmental remediation process, using phytoremediation, was tested. The results showed that the method could be applied to any kind of soils (mineral or organic) and was appropriate to very volatile compounds which were not available with conventional technique.