Search

Timely and rapid detection of antibiotic residues in the environment is conducive to safeguarding human health and promoting an ecological virtuous cycle. A foldable paper-based photoelectrochemical (PEC) sensor was successfully developed for the detection of ampicillin (AMP) based on glutathione/zirconium dioxide hollow nanorods/aptamer (GSH@ZrO 2 HS@apt) modified cellulose paper as a reactive zone with laser direct-writing lead sulfide/cadmium sulfide/graphene (PbS/CdS/LIG) as photoelectrode and cobalt hydroxide (CoOOH) as a photoresist material. Initially, AMP was introduced into the paper-based reaction zone as a biogate aptamer, which specifically recognized the target and then left the ZrO 2 HS surface, releasing glutathione (GSH) encapsulated inside. Subsequently, the introduction of GSH into the reaction region and etching of CoOOH nanosheets to expose the PbS/CdS/LIG photosensitive material increased photocurrent. Under optimal conditions, the paper-based PEC biosensor showed a linear response to AMP in the range of 5.0 - 2 × 10 4 pM with a detection limit of 1.36 pM (S/N = 3). In addition, the constructed PEC sensing platform has excellent selectivity, high stability and favorable reproducibility, and can be used to assess AMP residue levels in various real water samples (milk, tap water, river water), indicating its promising application in environmental antibiotic detection., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Low cost disposable working electrodes are specifically desired for practical applications of electrochemical detection considering maturity of electrochemical stations and data collection protocols. In this paper double-sided conductive adhesive carbon tape with nanostructure was applied to fabricate disposable working electrodes. Being supported by indium tin oxide glass, the prepared carbon tape electrodes were coated with bismuth film for stripping analysis of heavy metal ions. By integrating the bismuth modified electrodes with paper-based analytical devices, we were able to differentiate Zn, Cd and Pb ions with the sample volume of around 15 μL. After the optimization of parameters, including modification of bismuth film and the area of the electrodes, etc., Pb ions could be measured in the linear range from 10 to 500 μg/L with the detection limit of 2 μg/L. Our experimental results revealed that the disposable modified electrodes could be used to quantify migrated lead from toys with the results agreed well with that using atomic absorption spectrometry. Although bismuth modification and stripping analysis could be influenced by the low conductivity of the carbon tape, the low cost disposable carbon tape electrodes take the advantages of large-scaled produced double-sided carbon tape, including its reproducible nanostructure and scaled-up fabrication process. In addition, the preparation of disposable electrodes avoids time-consuming pretreatment and experienced operation. This study implied that the carbon tape might be an alternative candidate for practical applications of electrochemical detection., (© 2013 Elsevier B.V. All rights reserved.)

Due to the serious risks of lead pollution to human health, it plays a great role in constructing a simple, inexpensive, portable, and user-friendly strategy for Pb2+ detection in environmental samples. Herein, a paper-based distance sensor is developed to detect Pb2+ assisted with the target-responsive DNA hydrogel. Pb2+ can activate DNAzyme to cleave its substrate strand, which results in the hydrolysis of the DNA hydrogel. The released water molecules trapped in the hydrogel can flow along the patterned pH paper due to the capillary force. The water flow distance (WFD) is significantly influenced by the amount of water released from the collapsed DNA hydrogel triggered by the addition of various Pb2+ concentrations. In this way, Pb2+ can be quantitatively detected without using specialized instruments and labeled molecules, and the limit of detection (LOD) of Pb2+ is 3.0 nM. Additionally, the Pb2+ sensor works well in lake water and tap water. Overall, this simple, inexpensive, portable, and user-friendly method is very promising for quantitative and in-field detection of Pb2+ with excellent sensitivity and selectivity. [Display omitted] • A novel paper-based distance sensor assisted with DNA hydrogel is developed. • The hydrolysis of the DNA hydrogel by Pb2+ triggers release of the water. • The water flow distance is used to assess the level of Pb2+. • The detection of Pb2+ is successfully demonstrated in lake water and tap water. [ABSTRACT FROM AUTHOR]

The possibility of using pyrolyzed paper as disposable working electrodes for trace metals determination is reported for the first time. A small piece of pyrolyzed paper (0.7×0.7 cm) was positioned at the bottom side of the electrochemical cell using a rubber O-ring, which defined the electrode area (0.48 cm; 0.18 cm 2 ). A large number of electrodes can be obtained from a single piece of standard dimensions (2.5 cm×7.5 cm) of paper, therefore minimizing the cost per unit. The electrochemical performance of the pyrolyzed paper was demonstrated by cyclic voltammetry, electrochemical impedance spectroscopy and by the determination of Zn, Cd, and Pb by square-wave anodic stripping voltammetry. The unmodified pyrolyzed paper showed excellent performance for Pb and Cd detection (LOD =0.19 and 0.16 ppb, respectively). In the presence of Bi 3+ (in-situ film formation), the simultaneous determination of Zn, Cd and Pb was also possible (LOD=0.26, 0.25, and 0.39 ppb, respectively). [ABSTRACT FROM AUTHOR]