Search

A method is proposed for determining the number of damaged stator windings in the presence of an asymmetric power supply system for an induction electric motor based on the Park vector hodograph. As a result of the experiments on the simulation model, it was found that with the symmetry of the system of supply voltages and stator windings, the hodograph of the Park vector describes a circle; in all other cases it is an ellipse. It has been established that the presence of asymmetry in the supply voltage system is indicated by the angle of inclination of the ellipse, and the indicator of the presence of the asymmetry of the stator windings is the angle of ellipticity. In order to identify the presence of asymmetry of the stator windings in the conditions of asymmetry of the supply voltage system, an algorithm for recalculating the ellipse parameters for the condition of the symmetry of the supply voltage system was proposed. Recalculation errors did not exceed 6%. It has been established that the dependence of the increment of the amplitudes of the phase and angles of the phase currents of the stator on the number of damaged turns of the stator winding is linear. Based on this fact, an algorithm for determining the number of damaged turns was proposed. The results of this work can be used to build systems for diagnosing the interturn short circuit of the stator of an induction electric motor built into the drive. [ABSTRACT FROM AUTHOR]

The analysis of operating conditions of traction drives of electric locomotives with asynchronous traction motors has been carried out. It was found that during operation in the output converter of an asynchronous motor, defects may occur, which leads to asymmetric modes of its operation. Models of a traction drive of an electric locomotive with asynchronous motors with scalar and vector control of the output converter are proposed, taking into account asymmetric operating modes. As a result of the simulation, the starting characteristics of the traction drive were obtained for various control methods both in normal and emergency modes of the drive. For the drive-in emergency mode, the following cases were investigated: the balance of the converter output voltages and the turn-to-turn circuit of 10% of phase A winding of the motor stator; imbalance of the output voltages of the inverter and an intact motor; imbalance of the output voltages of the converter and interturn short circuit of 10% of phase A winding of the motor stator. Comparison of the simulation results have shown that in emergency modes in the traction drive, the torque ripple on the motor shaft in the drive with vector control is 13% less, and in scalar control, the phase current unbalance coefficient is 22% less. The results of this work can be used to study the influence of the output converter control methods on the energy efficiency indicators of the traction drive of an AC electric locomotive. [ABSTRACT FROM AUTHOR]