Search

Paper producers are increasingly challenged to meet customer demands for high-quality sanitary papers amidst rising price pressures and diminishing quality of recycled fibers. One promising avenue for enhancing paper quality involves augmenting wet strength. For this purpose, synthetic wet strength resins are used, among other things. This study explores the efficacy of utilizing a polyamide-epichlorohydrin resin-based agent for the internal sizing of white wastepaper. Such chemicals, when added to cellulosic fibers in proper amounts before the paper is made, can not only improve water resistance and air permeability of the finished product but also significantly affect both the dry and wet strength paper, which is a crucial aspect for sanitary papers. This study shows that the appropriate addition of resin allows the wetted recycled paper to retain even more than 30% of its dry strength, while in the dry state, the breaking strength of the paper is improved by approximately 46%. As the demand for more sustainable and resistant paper products continues to grow, the use of wet strength agents is expected to increase in the coming years, as well as the need for research in this field. This research therefore undoubtedly contributes to advancing sustainable practices within the paper industry, aligning with the principles of circular economy by optimizing the utility of recycled fibers while maintaining product quality. [ABSTRACT FROM AUTHOR]

Mineral oil has been used for many years in various electrical equipment, including transformers, as a cooling and insulation medium. However, its low biodegradability and poor performance in terms of fire protection have prompted the search for fluids to replace it, with vegetable oils being prominently considered. In this study, the dielectric, chemical, and physical properties of four vegetable oils obtained from different seeds (sunflower, rapeseed, soybean, and palm) and a biodegradable synthetic fluid are analysed throughout their lifespan in transformers. Their performances are compared with a traditional mineral oil to assess which one is more suitable for use in transformers employing this type of paper. To achieve this, the fluids were subjected to thermal ageing in combination with copper and a thermally upgraded kraft (TUK) paper, with its degradation controlled by measuring the degree of polymerisation. The results demonstrate that the origin of the vegetable oils affects their properties and degradation rates. It was found that most of the alternative fluids are suitable for use in transformers with the TUK paper and that they can increase their lifespan. [ABSTRACT FROM AUTHOR]

The pulp and paper industry (PPI) is a major contributor to the global economy, but it also poses a challenge for waste disposal, as it generates large amounts of several waste streams. Among these, paper rejects are generated during the papermaking process and could account for up to 25% of the produced paper. Moreover, hundreds of millions of tons of paper are produced annually that end up in landfills if not burnt or recycled. Furthermore, the PPI significantly contributes to climate change and global warming in the form of deforestation and water and air pollution. Therefore, the impact of this industry on the sustainability of natural resources and its adverse environmental health effects requires special attention. This review focuses on discussing the sustainable routes to utilize paper waste and rejects from the PPI towards a circular economy. At first, it discusses the industry itself and its environmental impact, followed by the possible sustainable approaches that can be implemented to improve papermaking processes as well as waste management systems, including paper recycling. The literature indicates that paper recycling is crucial because, if appropriately designed, it significantly lowers greenhouse gas emissions, water and resources consumption, and manufacturing costs. However, several concerns have surfaced about the different chemicals that are used to improve recycling efficiency and recycled paper quality. Furthermore, paper recycling is limited to up to seven times. This review, therefore, goes on to highlight several sustainable waste management routes for paper waste utilization other than recycling by emphasizing the concept of converting paper waste and rejects into energy and high-value materials, including biofuels, biohydrogen, biomethane, heat, nanocellulose, hydrochar, construction materials, and soil amendments. Both the benefits and shortcomings of these waste management routes and their applications are discussed. It becomes clear from this review that sustainable management solutions for paper waste and rejects are implementable, but further research and development are still needed. [ABSTRACT FROM AUTHOR]

This article introduces the concept of ecological costs associated with the waste paper recycling system. The costs associated with this process include resource consumption, waste emissions, ecological damage, and production processes. To analyze the ecological costs of deviations from the baseline material flow in a waste paper recycling system, a benchmark material flow diagram is constructed using the material flow analysis method. The diagram illustrates a fully closed one-way material flow of the recycling system, which is highly abstracted and simplified. The study analyzed the ecological costs of the benchmark material flow and the impact of deviations from it. The results suggest that the circulation of materials within and between processes increases the ecological cost of the waste paper recycling system. Furthermore, the release of materials from a process into the environment also contributes to its ecological impact. However, the introduction of external materials into the recycling system can reduce its ecological impact, particularly if these materials are recycled resources. The study emphasizes the significance of considering ecological costs in waste paper recycling systems to minimize their environmental impact. [ABSTRACT FROM AUTHOR]

Labels are a crucial component of products, offering informational content and attractive visuals; therefore, the durability of the print is an important quality requirement. On the other hand, in accordance with eco-design, the recyclability of printed labels is vital. In our research, the focus was on the assessment of the durability, recyclability, and deinkability of printed label paper equipped with printed RFID tags. The determined color fastness of electrophotographic prints affected by various environmental factors showed good resistance to dry rubbing and, in most cases, light and moist–heat treatment, confirming the applicability of digital printing on self-adhesive biodegradable paper labels. In the second part of this study, recyclability was assessed, and a comparison between the deinkability of the offset and digital prints and two conductive functional inks was conducted. Good deinkability was observed for the printed RFID antennas on both the offset and electrographic prints, with only a small deterioration in optical properties, especially when nano-silver conductive ink was used. The study highlights the importance of the selection of materials and printing techniques when considering the environmental impact of printed electronics. The results showed that INGEDE 11 is a suitable deinking method for printed RFID antennas on offset and electrographic prints. [ABSTRACT FROM AUTHOR]

This paper describes the process used to produce thermoplastic building materials from non-recyclable mixed plastic–paper packaging waste. A first step was dedicated to an innovative and sustainable sterilization technology for non-recyclable waste, based on exposure to microwave radiation in closed air-circulation ovens. Further, composites with different cellulose contents and with two polymer matrices, respectively, were obtained using an injection process, and the samples were subjected to mechanical and physical tests. Due to their superior features, the products based on mixed polypropylene–paper packaging waste may successfully replace the classic polyvinylchloride-based wood–plastic composites. The environmental impact of mixed plastic–paper packaging waste was analyzed, and the sustainability of the thermoplastic technology was demonstrated from an economic and environmental point of view. [ABSTRACT FROM AUTHOR]

The production process of the traditional paper making process produces a large amount of waste water, known as paper black liquor. It is needed to explore new ways of reusing this waste and replacing part of the base bitumen to reduce the consumption of non-renewable resources, such as petroleum, thus obtaining better environmental, economic, and social benefits. This paper analyses the feasibility of using paper black liquor, which contains a large amount of lignin, as a modifier for bitumen in the paper industry. Samples of modified bitumen were prepared with 15%, 30%, and 45% of the base bitumen replaced by paper black liquor, and a control group of base bitumen was prepared for testing. The samples were subjected to an 85 min short-term ageing test, FTIR scanning test, thermogravimetric test, frequency scanning test, MSCR test, and LAS test. The analysis of the FTIR and thermogravimetric tests showed that the paper black liquor was mainly composed of lignin and some cellulose, and contained a small amount of salts with Na ions; based on the results of the frequency scan, the compatibility analysis of the vGP curve showed that the modified bitumen was more compatible in the high-temperature range after short-term ageing, thus inferring that the water content of the concentrate had an influence on the compatibility, making it necessary to further investigate different optimum water contents to achieve the best performance and benefit. The incorporation of paper black liquor improved the rutting resistance and fatigue resistance of the modified bitumen, and also gave the paper-black-liquor-modified bitumen a better ageing resistance than the base bitumen. While demonstrating the feasibility of using paper black liquor as an bitumen modifier, this study also helps to provide a basis for theoretical applications of biomass materials in the field of road engineering. [ABSTRACT FROM AUTHOR]

In order to improve the hydrophobicity of xylan hemicellulose, a simple procedure of its chemical modification with alkyl ketene dimer (AKD), a non-toxic, cost-effective, and eco-friendly chemical, was performed. For this purpose, the reaction products of beech wood xylan and different amounts of hydrophobic AKD were used for paper surface treatment. Thus, the coatings of about 4.5 g/m2 were applied on both sides of base paper in single and three successive layers. To obtain a complete reaction between AKD and xylan hemicellulose, the coated papers were thermal cured (about 110 °C) and the effects of AKD content on the barrier (water, oil, and water vapours) and mechanical properties were analysed. The structural analyses by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR) of coated samples emphasized the presence of β-keto-ester compounds as a result of the reaction between xylan hemicelluloses and AKD. This is confirmed by the improving of barrier properties as the AKD content in coating dispersion is higher. The good barrier performance and improved strength properties were obtained for the coated papers with xylan hemicellulose and 1% AKD applied on paper surface in three successive layers (about 4.5 g/m2). In this case, the water vapours transmission rate (WVTR) was 35% lower than those untreated and the resistance to air passing through coated papers was over 3 times higher compared with base paper. There are no results reported on the chemical reaction of xylan hemicelluloses with AKD as well as its application in coatings for paper packaging. In this context, the obtained results in this study can contribute to expand the applications area of hemicelluloses offering a sustainable strategy for the developing of food packaging papers with appropriate barrier properties using biopolymer coating materials. [ABSTRACT FROM AUTHOR]

The rapid growth of airlines over the last period has led to the development of the aviation industry, resulting in increased requirements for ancillary services. Nowadays, the demand for the use of paper-based documents is increasing day by day as airlines encourage passengers to use more ancillary products. One of the most important issues in the aviation industry is flight safety. The procedures and instructions required for all aviation operations are organized in accordance with the regulations and printed on paper in accordance with the demands. For this reason, since it is mandatory to keep all aircraft maintenance, repair, and operation records on printed paper and to keep them for a certain period of time, aircraft fly with almost their entire weight on paper. Considering the global hazards in the world, although the aviation sector is the least environmentally damaging of all transportation sectors, new solutions have been sought to make aviation operations less harmful to the environment, minimize errors and risks, allow for faster communication, and be safer and more sustainable. In order to meet the demands, studies on reducing the use of paper have been brought to the agenda. In this study, after a literature review, real data from a maintenance, repair, and overhaul organization are used to suggest digital conveniences that can save costs, increase productivity, save space, facilitate documentation and information sharing, keep personal information more secure, and help the environment through paperless living. [ABSTRACT FROM AUTHOR]

Packaging waste correct sorting hugely impacts fiber-based packaging circularity. Currently, this is more crucial than ever, also due to the increased market share of fiber-based packaging. This study evaluated the relationship between the aesthetic properties and user material sorting actions of lightweight dispersion-coated and uncoated paper substrates. Unlike previous literature, no labeling or graphics were involved in this study, focusing on the physical and aesthetic properties of both coatings and substrates. Untrained panelists participated in a multi-phase (descriptive and hedonic) analysis involving a questionnaire and antonym scales about samples' visual and tactile properties, which were also characterized. The results highlight a remarkable panelist's ability to assess the relative gloss and roughness. Perceived roughness and mattness statistically significantly correlated to cellulosic material identification. Moreover, material sorting into the paper recycling stream was statistically significantly regulated by sample mattness, followed by sample roughness. This work suggests that, without any graphic or textual information, the combination of substrate characteristics and coating formulation strongly impacts the packaging aesthetics, hence packaging perception as paper-based material. Consequently, the correct material identification and sorting can be encouraged by proper packaging materials selection and coating development. [ABSTRACT FROM AUTHOR]

To reduce the pollution caused by paper sludge in the environment and overcome issues of poor water resistance and brittleness in Magnesium Oxychloride Cement (MOC), the MOC was modified by adding different dosages of paper sludge. The mechanical properties and damage modes of composite MOC materials containing paper sludge were studied by uniaxial compression tests. Under cyclic loading conditions, the damage progression of MOC composites was characterised using the tensile-shear conversion factor (Tsc) and by monitoring the energy parameters (elastic strain energy, plastic strain energy and dissipation energy). The results show that the average peak stress drop of MOC composites gradually increases with the increase in paper sludge dosage. Under uniaxial compression conditions, the Tsc of the MOC composites decreases from 0.99 to 0.44, and the damage mode is transitioned from brittle tensile damage to tensile-shear damage, X-shaped conjugate surface shear damage and finally to pure shear damage with an increase in doping. During cyclic loading conditions, the brittleness of MOC composites gradually decreases with an increase in paper sludge doping, which verifies the effect of paper sludge on the mechanical properties of MOC materials and the change in damage modes from the perspective of energy dissipation. [ABSTRACT FROM AUTHOR]

The main objective of this work is supporting the use of sustainable solutions for the management and reuse of agricultural waste from the cereal harvest, such as oats, barley, and triticale, making sheets of artisan paper, innovating the process with the use of different proportions of cellulose obtained from straw residues. The physical and mechanical properties of the obtained sheets showed that basis weight (66–96 g/m2), thickness (19–300 μm), burst strength (68.9–103.4 kPa), burst index (0.81–1.35 kPam2/g) and bulk (2.52–3.12 cm3/g), were adequate. Based on what can be observed in the SEM images, it is possible to infer that straw has the function of supporting the sheets using combinations of barley straw and recycled paper. The result of the IR analysis indicated that the sheet with an increase in hydroxyl groups was that obtained with barley straw. Therefore, the treatment was efficient. These results were corroborated by X-ray diffraction analysis, in which the percentage of crystallinity of the barley straw paper was 37.1%. Finally, the results obtained indicated that the crystallinity is better in the sheets containing large amounts of barley straw. The sheet with the highest percentage of crystallinity was that which was made using 100% of barley straw, showing a 37.1 percentage of crystallinity, followed by the sheet made of 100% recycled paper, having a value of 34.4%. [ABSTRACT FROM AUTHOR]

Some wastes from the paper pulp production process are still sent to a controlled waste landfill. These materials can constitute alternative resources for constructing road pavements. The study aimed to characterize and explore the sustainable application of two inorganic wastes resulting from the paper pulp process, the dregs (green liquor wastes) and the grits (slaker wastes), in the production of bituminous mixtures by the analysis of samples prepared with 5 and 10% of dregs and 5 and 10% of grits on the baseline reference bituminous mixture AC 14 surf 35/50. Some relevant mechanical properties of the blends were assessed based on Marshall compression, sensitivity to water and wheel-tracking tests. Additionally, water poured on the loose asphalt and compacted slabs' surface was analysed to determine the portion of harmful chemical compounds leached from the asphalt material. The results show that using dregs presented some technical limitations related to mechanical performance and that the incorporation of grits has an acceptable mechanical behaviour. Moreover, the study shows that the measured leachate resulting from water flow in a reference asphalt mixture and the blends with grits are insignificant. It can be concluded that using grits in asphalt mixtures is a promising technique regarding mechanical behaviour and environmental impacts that need further studies. [ABSTRACT FROM AUTHOR]

Melamine-impregnated paper waste (MIPW) is an unavoidable byproduct of the melamine-impregnated paper production process, and it must be urgently disposed. In this paper, due to its high N content, MIPW was used as a N source to co-pyrolyze with camellia oleifera shell (COS). By changing the proportion of MIPW in the raw materials, the migration path of the N was studied during the co-pyrolysis process. X-ray photoelectron spectroscopy (XPS), elemental analysis (EA), total nitrogen analysis (TN) and ultraviolet spectrophotometry were used to determine the content and the types of N-containing components in raw materials and products. The results showed that during the co-pyrolysis process, the N in MIPW and COS would be converted into different types of N-containing components, and the proportion of MIPW in raw materials directly impacts the product distribution and the N migration path. With the increase in the proportion of MIPW from 10 to 50 wt.% (daf, mass ratio), the proportion of N in raw materials that migrated into the solid phase decreased from 27.58 to 16.31 wt.%, while that which migrated to the gas and liquid phases increased from 24.92 and 47.50 wt.% to 25.97 and 57.72 wt.%, respectively. The proportions of N in the raw materials that changed into pyridinic-N, pyrrolic-N and graphitic-N in the solid phase and N2-N in the gas phase were decreased. The proportions of NH3-N and HCN-N in the gas phase and NH3-N and organic-N in the liquid phase were increased. Moreover, synergies were observed during the co-pyrolysis process, which affected the N migration path in the raw material. This study will provide policy directions and theoretical support for the comprehensive utilization of MIPW and COS. [ABSTRACT FROM AUTHOR]

Fine and ultrafine particulate matter are consequences of air pollution in industrialized nations. The use of natural materials for filters produces fewer side effects for humans and the environment, and due to their structural characteristics, they have the potential to effectively filter out fine particles. In this study, we developed an indoor, fine-dust removal filter using Hanji, a traditional Korean paper made from natural materials derived from mulberry trees. We impregnated activated carbon (AC) into the Hanji filter and conducted air permeability and efficiency experiments to determine the improvement in indoor air quality. The Hanji filter showed a removal efficiency of 80.4% within the first minute and 99.1% efficiency by the 38th minute, maintaining an efficiency of >99% thereafter. The dust removal efficiency of the AC-embedded Hanji filter proved superior. The dust adhesion was ~20 g/m2. An AC-embedded Hanji filter has the potential to remove not only fine dust but also volatile substances. The use of natural filters is both effective and sustainable. [ABSTRACT FROM AUTHOR]

The valorization of black liquor, a by-product produced in considerable quantities from the paper manufacturing processes, has demonstrated the effectiveness of thermal reconversion into pyrolysis gas, bio-oil, and bio-char, a sustainable approach placing the feedstock into a circular economy concept. The present study focused on developing disposal solutions through energy recovery via pyrolysis at 300 °C and 450 °C when lignite and nanomaterials (such as Cu-Zn-MCM-41, Ni-SBA-3, or Ni-SBA16) were used as catalysts. The results were compared to those of non-catalytic pyrolysis. The use of the Cu-Zn-MCM-41 catalyst proved to be efficient for pyrolysis gas production, reaching 55.22 vol% CH4. The increase in the calorific value of the pyrolysis gas was associated with the use of the Cu-Zn-MCM-41, showing a value of 42.23 MJ/m3 compared to that of the non-catalytic process, which yielded 39.56 MJ/m3. The bio-oil resulting from the pyrolysis with Cu-Zn-MCM-41 showed the highest energy value at 6457 kcal/kg compared to that obtained with the other two nanocatalysts, Ni-SBA-3 and Ni-SBA-16, as well as that of the raw material, which had a value of 3769 kcal/kg. The analysis of bio-char revealed no statistically significant differences when comparing the outcomes from using the various nanocatalysts, suggesting their minimal impact on the energy content. [ABSTRACT FROM AUTHOR]

Packaging and labels are used for a variety of products and have become an indispensable part of daily life, while products without labels or packaging cause uncertainty among consumers. The global trend is to reduce the amount of packaging waste by recycling and reusing the same material or using other available waste raw materials. With large quantities of stalks remaining discarded in the fields after harvest each year, cereal straw is emerging as an alternative source of lignocellulosic fibers for secondary green packaging and labels. In this study, the usability of printed papers with discarded lignocellulosic fibers by offset and gravure printing processes for secondary green packaging and labels was observed based on the qualitative parameters of reproduction and ink penetration into the printing substrate. From the obtained results, it can be concluded that gravure prints have greater penetration of the ink into the printing substrate, resulting in more uneven surface coverage with printing ink, compared to offset prints, where the viscosity of the ink and the printing process itself have the greatest influence. Therefore, these substrates with discarded lignocellulosic fibers can be used for secondary green packaging and labeling printed by the offset printing process, while gravure printing requires an additional coating or a larger amount of filler in the paper structure. [ABSTRACT FROM AUTHOR]

Innovation in the circular economy (CE) and the deployment of effective circular business models (CBM) have attracted significant attention in times of growing natural resource scarcity. Despite this widespread interest, significant challenges remain between theoretical innovations and effective CBM implementation in any industrial sector where companies pursue cost-saving opportunities through waste valorisation strategies. Since current methods mislead in terms of the real limitations to designing feasible novel products and services under a circular economy, this study proposes exploring determinants underpinning the organisational resilience of CBMs under a resource efficiency strategy through three case studies. As a result of a co-creation process, the implementation of a CBM framework was built upon empirical data and, thence, a phase-based implementation guide was laid out to assist companies in designing and implementing innovative CBM dealing with the complexity of innovative waste valorisation strategies between the PPI and construction sectors. Relevant findings on managerial and policy recommendations encountered along the demo stage are provided in this paper favouring an effective implementation of CE strategies: the role of technological and non-technological aspects within the CBM, the perspective of the ecosystem and its value proposition, and specific guidelines for the different phases of CBM life cycle. [ABSTRACT FROM AUTHOR]

Packaging appearance is important in a competitive market. Designers strive to create products that attract customers and often use laminated packaging, due to the attractive appearance and quality characteristics of the material. The circular economy in the recycling of cardboard packaging helps to reduce waste, saves natural resources and increases the quality of the environment. All of the above contributes to sustainable production, but the quality and properties of the obtained recycled paper materials should not be ignored. Recycling of laminated cardboard packaging often has a negative impact on the quality of recycled paper, due to the formation of sticky particles that can affect the optical properties of recycled paper and the efficiency of the recycling process. This article provides insight into the influence of each stage of production of packaging intended for pharmaceutical products on the properties and characteristics of recycled paper. The standard INGEDE 11 deinking method was used to remove dyes and other impurities from the pulp. The obtained optical results of the characteristics of recycled laboratory sheets obtained from laminated and non-laminated cardboard samples were compared in order to determine the impact of each stage of box production on the quality of the paper pulp. The acquired knowledge can be applied in the design phase of a more sustainable product, and laminated materials can be used in luxury products or to increase the functionality of the packaging. Designing for recycling will contribute to an increase in the quality of the obtained paper mass, which is directly related to an increase in the productivity of recycling and the sustainability of the packaging production process. [ABSTRACT FROM AUTHOR]

This article presents a systematic review of studies of the River Chief System (RCS). It utilizes a dataset comprising 363 high-quality papers published between 2009 and 2022, sourced from the Web of Science and the China National Knowledge Infrastructure (CNKI), as the foundation for analysis. The primary research method employed is a literature review. Additionally, CiteSpace bibliometric software (v6.2.R2) is used to perform keyword analysis of RCS research. The key research findings include the following points. Firstly, research into RCS has undergone two phases. Secondly, the review presents several points emergent in the literature that have been the focus of much study, including governance logics, theoretical foundations, operational mechanisms, policy effects, and current challenges. Furthermore, the author identifies key trends in the evolution of RCS, such as public participation, the utilization of information technology, and the implementation of the Lake Chief System, Forestry Chief System, and Field Chief System, as well as the construction of a rule of law. Finally, the author suggests that international comparative studies and an inquiry into long-term mechanisms for the implementation of the RCS are needed. This paper provides the first systematic review of the growing literature on RCS, based on papers written in both Chinese and English. It maps out key research points, identifies research trends, and provides a deeper understanding to guide future research. [ABSTRACT FROM AUTHOR]

Competition issues with food industry have recently boosted the exploration of alternative solutions capable of replacing starch in papermaking to a certain extent. Covalent grafting of quaternary ammonium groups onto LignoBoost® Eucalyptus kraft lignin has recently shown promise in this regard as the cationic products feature excellent water solubility across the entire pH scale. Considering these suitable properties, cationic kraft lignin was applied and evaluated, for the first time, in the perspective of partial substitution of cationic starch in papermaking, using bleached Eucalyptus kraft pulp. Based on an assessment of key paper properties, such as mechanical (tensile, bursting, and tearing indexes), structural (roughness, capillarity rise, air resistance, internal strength, and water contact angle), and optical ones (brightness, opacity, and relative color change), it is safe to conclude that the partial replacement of conventional cationic starch by cationic lignin does not compromise these features. The results also show that properties can be fine-tuned by varying the degree of lignin derivatization, providing paper-specific solutions for replacing starch by lignin potentially available at large-scale at the pulp and paper industry, closing the loop within the circular economy concept. [ABSTRACT FROM AUTHOR]

It is important to classify academic papers in a fine-grained manner to uncover deeper implicit themes and semantics in papers for better semantic retrieval, paper recommendation, research trend prediction, topic analysis, and a series of other functions. Based on the ontology of the climate change domain, this study used an unsupervised approach to combine two methods, syntactic structure and semantic modeling, to build a framework of subject-indexing techniques for academic papers in the climate change domain. The framework automatically indexes a set of conceptual terms as research topics from the domain ontology by inputting the titles, abstracts and keywords of the papers using natural language processing techniques such as syntactic dependencies, text similarity calculation, pre-trained language models, semantic similarity calculation, and weighting factors such as word frequency statistics and graph path calculation. Finally, we evaluated the proposed method using the gold standard of manually annotated articles and demonstrated significant improvements over the other five alternative methods in terms of precision, recall and F1-score. Overall, the method proposed in this study is able to identify the research topics of academic papers more accurately, and also provides useful references for the application of domain ontologies and unsupervised data annotation. [ABSTRACT FROM AUTHOR]

Assessing technological advancements is crucial for the formulation of science and technology policies and making well-informed investments in the ever-evolving technology market. However, current assessment methods are predominantly geared towards mature technologies, limiting our capacity for a systematic and quantitative evaluation of emerging technologies. Overcoming this challenge is crucial for accurate technology evaluation across various fields and generations. To address this challenge, we present a novel approach that leverages bibliometrics, specifically paper citation networks, to gauge shifts in the flow of knowledge throughout the technological evolution. This method is capable of discerning a wide array of trends in technology development and serves as a highly effective tool for evaluating technological progress. In this paper, we showcase the accuracy and applicability of this approach by applying it to the realm of mobile communication technology. Furthermore, we provide a comparative analysis of its quantitative results with other conventional assessment methods. The practical significance of our model lies in providing a nuanced understanding of emerging technologies within a specific domain, enabling informed decisions, and fostering strategic planning in technology-oriented fields. In terms of originality and value, this model serves as a comprehensive tool for assessing technological progress, quantifying emerging technologies, facilitating the evaluation of diverse technological trajectories, and efficiently informing technology policy-making processes. [ABSTRACT FROM AUTHOR]

In this study, the primary paper-mill sludge characterized as containing 51% glucan was used to optimize the enzymatic saccharification process for the production of bioethanol using a Box–Behnken design (BBD). Polyethylene glycol 4000 (PEG-4000) surfactant-assisted enzymatic saccharification of dried primary sludge (DPS) showed a 12.8% improvement in saccharification efficiency. There was a statistically significant effect of solid enzyme loading and saccharification time on the enzymatic saccharification of DPS at a 95% confidence level (p < 0.05). The optimum levels of 10.4% w/w DPS solid loading, 2.03% enzyme loading (10 FPU g/DPS), and 1% (w/w DPS) PEG-4000 loading for a saccharification efficiency of 57.66% were validated experimentally and found to be non-significant with regard to the lack of fit with the predicted saccharification efficiency of 56.76%. Furthermore, Saccharomyces cerevisiae fermented the saccharified sugars into ethanol (9.35 g/L) with a sugar-to-ethanol conversion yield of 91.6% compared with the theoretical maximum. Therefore, DPS is a more suitable renewable biomass for determining the presence of fermentable sugar and for the production of ethanol. [ABSTRACT FROM AUTHOR]

Recently, the climate and landfill crises have raised concerns in the UK as the country is struggling to meet the sustainability goal it set to achieve. One of the major reasons is due to the inadequate recycling rate of waste paper. Therefore, as an alternative solution to the issue, the aim of our research was to exploit the potential of waste paper as an insulating material to see whether it can be feasible to improve the recycling rate of waste paper in the country. Waste paper has already been in the construction industry for a while, and the use of cellulose insulation is a standard in the Passivhaus construction approach. The study examines cellulose's performance as an insulation material and its potential to combat the climate crisis by creating four separate comparisons and calculations using Life-Cycle Assessment and Standard Assessment Procedures. The study will investigate the benefits and limitations of the material as well as a case study to justify the use of it. A pioneer project in the field is a retrofit and new-built building project—54–58 Akerman Road in London. It utilises cellulose fibre insulation as the main material for the new-built part. The study will use this project as a context to compare whether cellulose fibre insulation is the best solution for the project. Also, the study will compare cellulose insulation with other conventional insulation materials in a more general setting as well as with the traditional paper recycling approach, by providing an indication of the carbon footprint of the insulation, the energy resources involved and the amount of raw material. By conducting the study, we can know whether recycling waste paper into cellulose insulation is the best solution to the crisis we face. This research can guide the UK's recycling and use of waste paper, reduce paper waste and energy consumption and improve the sustainability of building insulation materials. [ABSTRACT FROM AUTHOR]

Paper and plastic are the main materials used in food packaging. In the context of climate change, the importance of tree conservation and the mitigation of the negative environmental impacts caused by fossil consumption and deforestation is greater than ever before. This article reviews the potential of plant-origin feedstock from the Baltic Sea region for use in non-wood-fibre and bio-origin plastic food packaging production. It also presents a systematised literature review of the environmental impacts and applications of tree-free paper, plant-origin plastics, and natural-fibre-reinforced bio-composites in fully green food packaging. The results reveal that beneficial environmental impacts are achieved if waste or by-products are used as feedstock. While the production volumes of alternative materials in Europe are small (0.25% of paper is made of materials other than wood, and the share of bio-plastic is 0.9%), we found a large demand and potential for growth. The biggest volumes of natural fibre feedstock in Baltic Sea region countries are generated from wheat. Wheat straw, which is a by-product, has a production volume of 68.71 million tons and is potentially a significant non-wood-paper food packaging source. Agricultural waste generated from sugar beet, maize, potato, and wheat is an environmentally beneficial by-product that could be used for bio-plastic food packaging production. [ABSTRACT FROM AUTHOR]

A successful transition to a lower-emission society may require major changes in the patterns of individual behaviours. Yet, whilst awareness and concern about climate change have increased in recent years among the global population, global greenhouse gases emissions have not ceased to rise. This paper discusses potential reasons underlying the gap between individual knowledge of climate change and the actions implemented to contain greenhouse gas emissions. To investigate this phenomenon, we look at the scientific literature exploring the factors influencing pro-environmental behaviour. First, we highlight how an individual's environmental knowledge is not only approximate but also biased by cognitive, affective, and cultural factors, influencing their appraisal of climate information and their motivation to act. Second, we discuss three major models of pro-environmental behaviour, such as the Theory of Planned Behaviour (TPB), the Norm-Activation Model (NAM), and the Value-Belief-Norm (VBN), to highlight their failure to account for automatic cognitive and affective factors influencing an individual's ability to implement pro-environmental intentions. Then, we discuss the Comprehensive-Action-Determination Model of pro-environmental behaviour (CADM), and its efforts to overcome the limits of the previous models. Finally, we examine the dispositional traits associated with pro-environmental engagement to highlight how the relationship between dispositions and pro-environmental behaviour performance appears related to self-regulation processes, supported by executive functioning; increased self-regulation would enable alignment of pro-environmental intentions and behaviours, and anticipation of the long-term consequences of present behaviours. We conclude by calling for more research to be carried out on the effect of enhanced self-regulation, and of self-regulation training, on individual reactions to the climate crisis. [ABSTRACT FROM AUTHOR]

As both governments and customers push for sustainable and recyclable textile products, textile companies will have to change their linear business model to a circular one. The aim of the present work is to help these companies take action by providing an update of the state-of-the-art of textile recycling technologies. Extensive desktop research was performed in order to prepare an overview of existing textile recycling technologies, their current state, and projected developments, also including facilitating technologies for sorting and disintegration of textile products, as well as virtual platforms that connect stakeholders and inform consumers. [ABSTRACT FROM AUTHOR]

The application of urea-based selective catalytic reduction products (i.e., Urea-SCR) provides a reduction of NOx and, therefore, minimizes pollution emissions from vehicles fueled by diesel. Such products can be easily found in the market; however, they are often susceptible to adulteration, mainly in terms of the urea content and dilution with non-mineralized water. In this study, we propose a simple, low-cost, disposable, and straightforward paper-based microfluidic device for the quality-control of Urea-SCR products for the first time by quantifying urea and water hardness simultaneously via colorimetric reactions using a small volume of sample. 4-(dimethylamino)benzaldehyde and Eriochrome T were used as colorimetric indicators for urea and water hardness determination, respectively. Each reagent (1.5 µL) was combined with 6 µL of sample for analysis, contributing to an expressive reduction of waste generation. Digital images of the µPAD were obtained, and linear relations between color intensity and urea and Ca2+ and Mg2+ concentrations in the range of 0.2 to 1.0% and 0.1 to 3.5 mmol L−1 were obtained with a correlation coefficient higher than 0.99. Recovery experiments were employed to evaluate the accuracy of the methodology, revealing suitable values between 91.5 and 115%. Brazilian Urea-SCR samples were acquired from different distributors and submitted to the proposed procedure to evaluate its applicability. The application of microfluidic paper-based devices with colorimetric reactions enables the quality control of Urea-SCR products with high accuracy, portability, low consumption of reagents, and no generation of toxic residues; thereby contributing to the green analytical chemistry field. [ABSTRACT FROM AUTHOR]

Marine protected areas (MPAs) are a common management tool for preserving marine biodiversity and halting resource depletion. Despite the number of MPAs rapidly increasing worldwide, there are concerns over the full achievement of their objectives. Indeed, in some cases—the phenomenon of so-called "paper parks"—protected areas totally fail to achieve their conservation and socioeconomic targets. Therefore, identifying the factors underpinning MPA success or failure is crucial to increase their effectiveness. To achieve this goal, we performed a global literature review on the socioeconomic factors that managers should pursue to enhance MPA effectiveness on a global scale. A search of the Scopus database, using strings of keywords connected by Boolean operators, generated a batch of 715 items, out of which 68 were retained after the application of inclusion/exclusion criteria. Six other articles were added through the scanning of the literature cited in selected papers. We grouped MPA success-factors into 13 main groups and ranked them according to the frequency of citation in the literature. Our findings identify stakeholder involvement, increasing communication and awareness between specific stakeholder groups, as well as ensuring appropriate enforcement and monitoring, control and surveillance, as the leading factors for MPA success. Our results will assist in the process of upcoming global expansion of MPAs, thus contributing to improving conservation of marine biodiversity and associated livelihoods. [ABSTRACT FROM AUTHOR]

The recovery of fibres from waste paper (WP) and deinking sludge (DIS) reduces the stress on nature compared to the collection of virgin pulp for paper production. Moreover, if not recycled, WP and DIS are mainly landfilled and incinerated, being thus responsible for the release of greenhouse gases (GHGs) into the atmosphere. In this context, energy recovery from WP and DIS would contribute to increasing energy independence and improving waste management in the pulp industry. From a broader perspective, it would increase renewable energy generation, supporting the paper industry in reducing fossil fuel consumption and GHGs emissions, in line with the goals of the European Union (EU) Green Deal 2021. For these reasons, in the present study, the combined heat and power generation potentiality of WP–DIS blends through gasification in combination with an internal combustion engine is numerically assessed for the first time. The air gasification process is simulated by applying a restricted chemical equilibrium approach to identify the optimum operating temperature (850 °C) and equivalence ratio (0.2). Electrical and thermal energy generation potentiality, considering WP and DIS production in the EU in 2019, is estimated to be in the ranges of 32,950–35,700 GWh and 52,190–56,100 GWh, respectively. Thus, it can support between 25 and 28% of the electrical and 44–48% of the thermal energy demand of the paper manufacturing sector, reducing the CO2 emission in the range of 24.8–28.9 Gt. [ABSTRACT FROM AUTHOR]

It has been a persistent challenge to develop eco-friendly packaging cellulose film providing the required multiple barrier properties whilst simultaneously contributing to a circular economy. Typically, a cellulosic film made from nanocellulose materials presents severe limitations, such as poor water/moisture resistance and lacking water vapour barrier properties, related primarily to the hydrophilic and hygroscopic nature of cellulose. In this work, alkyl ketene dimer (AKD) and starch, both eco-friendly, non-toxic, cost-effective materials, were used to achieve barrier properties of novel cellulose–calcium carbonate composite films regenerated from paper components, including paper waste, using ionic liquid as solvent. AKD and starch were applied first into the ionic cellulose solution dope mix, and secondly, AKD alone was coated from hot aqueous suspension onto the film surface using a substrate surface precooling technique. The interactions between the AKD and cellulose film were characterised by Fourier-Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD) showing the formation of a ketone ester structure between AKD and the hydroxyl groups of cellulose. The presence of calcium carbonate particles in the composite was seen to enhance the cellulose crystallinity. The initial high-water vapour and oxygen transmission rates of the untreated base films could be decreased significantly from 2.00 to 0.14 g m−2 d−1, and 3.85 × 102 to 0.45 × 102 cm3 m−2 d−1, respectively. In addition, by applying subsequent heat treatment to the AKD coating, the water contact angle was markedly increased to reach levels of superhydrophobicity (>150°, and roll-off angle < 5°). The resistance to water absorption, grease-permeation, and tensile strength properties were ultimately improved by 41.52%, 95.33%, and 127.33%, respectively, compared with those of an untreated pure cellulose film. The resulting regenerated cellulose–calcium carbonate composite-based film and coating formulation can be considered to provide a future bio-based circular economy barrier film, for example, for the packaging, construction and agriculture industries, to complement or replace oil-based plastics. [ABSTRACT FROM AUTHOR]

As China puts forward its "carbon emissions peak and carbon neutrality" goals, how to achieve carbon reductions has become a key for China's goal. The manufacturing industry is a significant source of carbon dioxide emissions. For a manufacturing country such as China, adjustments in various aspects of the industry would have a huge impact on its carbon emissions. As an important reform of the contemporary production mode, the process of production automation in China will inevitably affect China's carbon emissions; therefore, the analysis of the impact of that production automation on the carbon dioxide emissions is an important basis for judging the future carbon reductions in China. Referring to the traditional study of the carbon Kuznets curve, this paper analyzes the impact of an average wage on production automation and the role of production automation in the carbon Kuznets curve (CKC). This paper proposes that production automation plays a mediating role in the process of carbon emissions, and gives a verification model of that mediating role. By analyzing the relationship between average wages and the production automation process, the U-shaped curve relationship between them was verified. By examining the relationship between carbon dioxide emissions data and the production automation industry in China, we verified that production automation plays a partial mediating role in the change of the carbon Kuznets curve. Combined with the analysis of the two parts, this paper believes that with the continuous development of China's intelligent manufacturing industry, China's carbon reduction prospects are more optimistic, and that there is a good industrial foundation to achieve the "carbon peaking and carbon neutrality" goals. Finally, this paper proposes policy suggestions so as to increase research investment in production automation, to help promote the application of production automation, encourage the research and application development of low-carbon technology, especially encouraging modular design, and to give full play to the role of production automation in the process of carbon neutrality in China. [ABSTRACT FROM AUTHOR]

In the 21st century, numerous economic and environmental initiatives have significantly increased paper recycling, which continues to expand due to environmental awareness. With increasing recycling rate, low-quality paper fractions may be included in the process, leading to the overproduction of very low-value papers that cannot be reprocessed. Moreover, the production of paper from poor-quality wastepaper can result in the introduction of chemicals from the recycled paper into the recycling loop and unintended spread of chemical substances. Therefore, reliable and conscious selection of recycled pulp is imperative. To this end, the present study verified the properties of recycled pulp critical for the assessment of its papermaking ability for the production of high-quality sanitary paper. Following an examination of samples, it was found that the key parameters that influence the papermaking ability of wastepaper include presence of impurities, content of extractive substances, freeness, and length of fiber. On this basis, types of wastepaper that, at the very beginning, did not portend well for obtaining paper products with high potential for utility were eliminated. [ABSTRACT FROM AUTHOR]

Since society is moving towards sustainable development, interest in secondary use of waste has recently become significant. This paper investigates a process to develop an acoustic material, using two types of waste. Composite acoustic panels were developed using waste tyre textile fibres (WTTF) and paper sludge (PS), and polyvinyl acetate (PVA) were used as a binder. Non-acoustic (bulk density, airflow resistivity) and acoustic (sound absorption coefficient, sound transmission loss) parameters were studied. Composite acoustic panels with different proportions of WTTF/PS/PVA (sixteen samples) were subjected to testing for the sound absorption coefficient according to ISO 10534-2 and sound transmission loss according to ASTM E2611. The density of all samples varied between 155.2 and 709.9 kg/m3, the thickness between 14.4 and 20.5 mm, and the airflow resistivity between 29.5 and 101.5 kPa∙s/m2. The results reveal that the proportion of various waste materials in mixtures can improve the acoustic performance of panels. The combination that gives the highest αavg. with a value of 0.50 was experimentally found to be 70% WTTF mixed with 15% PVA and 15% H2O. The average sound absorption coefficient with a value of 0.46 was also found to be 25% WTTF mixed with 25% PS and 25% PVA and 25% H2O. In sound transmission loss, the most effective was 50% PS and the 50% PVA composite, the TLeq was 28.3 dB, while the composites together with 30% WTTF, 20% PS and 25% PVA, and 25% H2O showed 18.9 dB loss. The results obtained using WTTF and/or PS wastes are attractive and show great and promising development potential. [ABSTRACT FROM AUTHOR]

The thermal envelope is a key component of a building's energy efficiency. Therefore, considerable efforts have been made to develop thermal insulating materials with a better performance than the existing products. However, in the current climate change scenario, these materials must be sustainable, principally during their production stage. In this context, the use of recycled raw materials and agro-industrial waste can be the basis of a material with a low environmental impact and a good thermal performance. In this study, cellulose and wheat straw were characterized. Then, they were mixed in different proportions and densities and the best thermal behavior was selected. The materials were chemically analyzed by TAPPI 2007, thermogravimetric and infrared spectroscopy, together with the measurement of their thermal conductivity with a thermal property analyzer based on the transient line heat source method. The results show that both raw materials are chemically similar to each other. When mixed, they have a thermal conductivity ranging from 0.031 to 0.036 (W/mK), being comparable with several conventional thermal insulators. On the other hand, to achieve the commercial use of this material, an installation through a blowing process has been proposed and proves to be highly promising, achieving a proper density and efficiency in its application. [ABSTRACT FROM AUTHOR]

Maintaining sustainable progress in knowledge and technology is essential in building a sustainable society. The transnational or transregional mobility of talents is one of the important channels for the flow and sustainability of knowledge and technology. Based on the social network theory, we attempt to investigate whether scholars' mobility experience will effectively improve their future scientific research productivity. Empirical studies were conducted based on the academic curriculum vitae of faculties in a leading research university in China from 2008 to 2023. The results suggest that the mobility experience of scholars does not have a significant influence on the total number and quality of papers when we consider both domestic and international publications due to diversified publication channels in the social science disciplines. However, in terms of the number of papers published in international journals and international collaborations, the existence of mobility experiences in their past education or working experience has a significant positive impact on scholars' later research productivity. In addition, scholars flowing through joint training programs at their doctoral phase tend to produce more co-authored papers. This research provides a reference for the wellbeing and sustainable productivity of university scholars, which is essential in higher education and social environments, and provides universities in developing countries with inspiration for building a sustainable academic talent flow system. It is important to note that this empirical study mainly focuses on researchers and publications in the social sciences, and the behavioral pattern and impact on research outputs might be different for scholars in the natural science disciplines. Due to the limitations with regard to data acquisition, this paper has not further discussed building an international academic network, which needs more in-depth research in the future. [ABSTRACT FROM AUTHOR]

While numerous Marine Protected Areas (MPA) have been created in the last decades, their effectiveness must be assessed in the context of the country's biodiversity conservation policies and must be verified by local observations. Currently, the observations of local stakeholders, such as those from non-governmental organizations (NGOs), academics, government civil servants, journalists, and fishers, are not considered in any MPA database. The Sea Around Us has added observations from local stakeholders to address this gap, adding their perspectives to its reconstructed fisheries catch database, and to at least one MPA in each country's Exclusive Economic Zone. It is important to pursue and incentivize stakeholder knowledge sharing to achieve a better understanding of the current level of marine protection, as this information is a valuable addition to the existing MPA databases. To address this gap, we demonstrated that personal emails containing a one-question questionnaire about the fishing levels in an MPA are an excellent way to gather data from local stakeholders, and that this works especially well for respondents in NGOs, academia, and governments. Of the stakeholders who replied to our personalized email, 66% provided us with the fishing level of the MPA that we asked for. The paper also presents how to access this information through the Sea Around Us website, which details in anonymized form the most common fishing levels for each selected MPA, as perceived or observed by different local stakeholder groups. This information is a unique and novel addition to a website that is concerned with marine conservation and contributes to a more accurate and inclusive discourse around MPAs. This information also helps to identify the gaps that need to be addressed to turn 'paper parks' (i.e., MPAs that are legally designated but not effective) into effective MPAs, which can contribute to climate-resilient 'blue economies'. [ABSTRACT FROM AUTHOR]

The discourse regarding place attachment (PA) has grown even more divergent, and an array of scholars and practitioners apply place attachment concepts in their work, drawing out associations between PA and environment-related behavior and revealing how an understanding of people's attachment to place can influence research, policy, and design practice. In this paper, we use bibliometrics and CiteSpace software to quantify and visualize 528 publications of place attachment and environment-related behavior research (PAEBR) in the core collection database of Web of Science (WoS) from 1 January 2004 to 1 November 2022 and trace the main overview of the research from the number of published papers. First, we present the number of papers published, research discipline distribution, the core authors of articles, the fundamental condition of countries and research organizations, and the major journals of articles involved in PAEBR through bibliometrics. Second, we identify trending research topics in PAEBR using keyword co-occurrence analysis. The results show that the four research trending topics involved climate change, pro-environmental behavior, and environmental threat. All of these provide readers with a preliminary understanding of PAEBR, indicating that cooperation and analysis involving multiple disciplines, specialties, and perspectives will become the dominant trend in this field. [ABSTRACT FROM AUTHOR]

Urban areas, with their dense populations and complex infrastructures, are increasingly susceptible to various risks, including environmental challenges and infrastructural strain. This paper delves into the transformative potential of digital twins—virtual replicas of physical entities—for mitigating these risks. It specifically explores the role of digital twins in reducing disaster risks, such as those posed by earthquakes and floods, through a comprehensive bibliometric-based literature review. Digital twins could contribute to risk reduction by combining data analytics, simulation, and predictive modeling by creating virtual replicas of physical entities and integrating real-time data streams to better address and manage risks in urban environments. In detail, they can help city planners and decision-makers analyze complex urban systems, simulate potential scenarios, and predict potential outcomes. This proactive approach allows both the identification of vulnerabilities and better implementation of targeted mitigation strategies to enhance urban resilience and sustainability. More informed decisions can be made relying on simulations, and it can also be possible to optimize resource allocation and better respond to emerging challenges. This work reviews the key publications in this domain, with the aim of finding relevant papers that can be useful to urban planners and policy-makers. The paper concludes by discussing the broader implications of these findings and identifying challenges in the widespread adoption of digital twin technology, including data privacy concerns and the need for interdisciplinary collaboration. It also outlines prospective avenues for future research in this emerging field. [ABSTRACT FROM AUTHOR]

In this work, different alternatives to conventional tertiary treatment of pulp and paper (P&P) wastewater (WW), i.e., physicochemical coagulation-flocculation, were investigated to enhance the environmental and economic sustainability of industrial wastewater treatment. In particular, following a preliminary characterization of secondary effluents, cloth filtration and adsorption were studied, the former by pilot-scale tests, while the latter at laboratory scale. An economic analysis was finally accomplished to verify the full-scale applicability of the most promising technologies. Cloth filtration showed excellent total suspended solids (TSS) removal efficiency (mean 81% removal) but a very limited influence on chemical oxygen demand (COD) (mean 10% removal) due to the prevalence of soluble COD on particulate COD. Adsorption, instead, led to a good COD removal efficiency (50% abatement at powdered activated carbon—PAC—dosage of 400 mg/L). The economic analysis proved that adsorption would be convenient only if a local low-cost (100 €/ton) adsorbent supply chain was established. Ultrafiltration was considered as well as a potential alternative: its huge capital cost (19 M€) could be recovered in a relatively short timeframe (pay-back time of 4.7 years) if the ultrafiltrated effluent could be sold to local industries. [ABSTRACT FROM AUTHOR]

This editorial from the Sustainability Journal introduces a special issue focused on strategic management and organizational innovation for improving sustainability. The editorial emphasizes the importance of strategic innovation in business development, corporate value, and competitiveness. It also highlights the need for more research on the connection between strategic innovation and sustainability. The document provides an overview of the first five research papers in the special issue, covering topics such as the relationship between strategic innovation and sustainability, factors affecting sustainable development, innovation strategies in the Chinese household appliance sector, the impact of digital capabilities on subsidiary performance, and the combination of environmental, social, and governance management with organizational innovation from a digital leadership perspective. The summaries of these papers offer library patrons a glimpse into the research objectives, methodologies, and key findings of each study. [Extracted from the article]

Nowadays there is a growing concern with the environment and sustainability, which means that better methods, including pollutants analysis, with less consumption of materials, organic solvents, and energy, need to be developed. Considering the almost inexistent information about the topic, the main goal of this work was to compare the environmental impacts of two analytical methods, a traditional one based on liquid chromatography with fluorescence detection and a newly developed carbon paper sensor. The selected analyte was 17α-ethinylestradiol, which is a contaminant of emergent concern in aquatic ecosystems due to its endocrine disruptor behavior. The life cycle assessment data showed that the sensor detection presents an almost negligible environmental impact when compared with the extraction step (the same for both methods) and the liquid chromatographic determination (roughly 80 times higher than with the sensor). The sensor values for all categories of damage are below 3% of the total method impacts, i.e., 1.6, 1.9, 2.4, and 2.9% for resources, climate change, human health, and ecosystem quality. The extraction represents 98.1% of the sensor environmental impacts (and 99.6% of its life cycle costing) and 38.8% of the chromatographic method. This study evidences the need of developing and applying greener analytical (detection and extraction) strategies. [ABSTRACT FROM AUTHOR]

Materiality assessment identifies the main issues to be disclosed in non-financial reports to respond to the concerns of stakeholders, thus improving the quality of those reports. The purpose of this research is to understand whether there is a relationship between the quality of non-financial reports and the application of standards such as the Global Reporting Initiative (GRI) and the International Integrated Reporting Council (IIRC), as well as between the impact of stakeholder engagement and the adoption of the materiality principle. To do so, manual content analysis was performed on companies from the paper industry in the Iberian Peninsula that published non-financial reports in accordance with the GRI and/or IIRC standards during the period between 2015 and 2020. The sample consists of 133 company-year observations, and data were collected through content analysis of the reports. The results show that companies that more scrupulously follow the GRI and/or IIRC standards and those that pay more attention to the relationship with their stakeholders show higher levels of materiality, meaning higher quality of reports. In addition, it is also noticeable that, over the years, the concern with these disclosures has increased, reflecting an increase in attention given to materiality. [ABSTRACT FROM AUTHOR]

The global process of providing shelter plays an important role in sustainable development. Buildings are estimated to be responsible for up to 50% of global carbon emissions, which makes building a major issue for climate change. The common saying is that what "we cannot measure, we cannot improve". This assumes that we know what to measure, which requires that we have a common understanding. The indication is that there could be problems in how we understand building sustainability, which, if true, will reduce change towards sustainable building. The purpose of this paper is to assess how building sustainability is understood in building research and building practice. The research approach is to review how building researchers and building companies have interpreted sustainability in leading articles and in leading sustainability reports. These are assessed by studying how sustainability is described and then in more detail applying two maturity matrices on the articles and the reports. The preliminary results indicate that there could be a major problem in understanding sustainability among both building researchers and building company managers, which could constitute a significant obstacle to improving building sustainability. This might not only be related to building sustainability but could be a general problem. [ABSTRACT FROM AUTHOR]

The purpose of this position paper is to present an opinion on the importance of understanding host community perspectives in any community-based corporate social responsibility initiative. A host community is essentially the consumer of any community-based CSR, yet they each have unique cultures, features, needs, and expectations, which may or may not fit a business's CSR initiative, unless the community perspectives are accounted for prior to the implementation of the CSR project. Focusing on the hotel sector context, the paper develops its position by reviewing supporting literature and highlighting the outcomes of a qualitative case study that involved face-to face semistructured interviews with 15 local opinion leaders who represented several local communities. The paper concludes with a firmer opinion on its position, and it offers some of the implications of its findings. [ABSTRACT FROM AUTHOR]

Concerns about the environment, the cost of energy, and safety mean that low-energy cold-mix asphalt materials are very interesting as a potential replacement for present-day hot mix asphalt. The main disadvantage of cold bituminous emulsion mixtures is their poor early life strength, meaning they require a long time to achieve mature strength. This research work aims to study the protentional utilization of waste and by-product materials as a filler in cold emulsion mixtures with mechanical properties comparable to those of traditional hot mix asphalt. Accordingly, cold mix asphalt was prepared to utilize paper sludge ash (PSA) and cement kiln dust (CKD) as a substitution for conventional mineral filler with percentages ranging from 0–6% and 0–4%, respectively. Test results have shown that the incorporation of such waste materials reflected a significant improvement in the mixture's stiffness and strength evolution. The cementitious reactivity of PSA produces bonding inside the mixtures, while CKD is used as an additive to activate the hydration process of PSA. Therefore, based on the results, it will be easier to build cold mixtures by shortening the amount of time needed to reach full curing conditions. [ABSTRACT FROM AUTHOR]

Archaeology is often argued to provide a unique long-term perspective on humans that can be utilised for effective policy-making, for example, in discussions of resilience and sustainability. However, the specific archaeological evidence for resilient/sustainable systems is rarely explored, with these terms often used simply to describe a community that survived a particular shock. In this study, a set of 74 case studies of papers discussing archaeological evidence for resilience/sustainability are identified and analysed using bibliometric methods. Variables from the papers are also quantified to assess patterns and provide a review of current knowledge. A great variety of scales of analysis, case study locations, stressors, resilient/sustainable characteristics, and archaeological evidence types are present. Climate change was the most cited stressor (n = 40) and strategies relating to natural resources were common across case studies, especially subsistence adaptations (n = 35), other solutions to subsistence deficiencies (n = 23), and water management (n = 23). Resilient/sustainable characteristics were often in direct contrast to one-another, suggesting the combination of factors is more important than each factor taken individually. Further quantification of well-defined variables within a formally-produced framework is required to extract greater value from archaeological case studies of resilience/sustainability. [ABSTRACT FROM AUTHOR]

Climate change affects water resources through the decrease in rainfall and the increase in temperatures and evapotranspiration. An indirect impact of climate change is also the increase in water uses by human activities. In this review, 320 papers were retrieved, of which 134, spanning five continents and dealing with impacts and solutions, were selected to be used to better understand the effects of climate change on water resources, ecosystems, human health, security, and socio-economic aspects. Here, suggestions and proposals towards solutions by scientists from around the world, tips and ideas to deal with climate change, and the best solutions for future water management are presented. The main solutions highlighted concern integrated water resource management, political direction, policies, an increase in knowledge, and new technologies. Furthermore, most of the analyzed papers underline that water resource management needs to incorporate the protection and restoration of ecosystems and their services. Nature-based solutions need to be the starting point of new scientific and innovative ways to deal with climate change and look towards future climate adaptation. In this complex evolution of the water resource, the political position of Italy is also shown, illustrating what actions could be implemented for water resource management. [ABSTRACT FROM AUTHOR]

As a crucial basic natural resource, water resources are the cornerstone for sustainable national economic development. This paper takes the 2014 pilot water rights trading policy (WRT) as an entry point and uses a difference-in-differences (DID) model to test the policy effect of WRT on water-use efficiency (WUE) based on panel data for 30 Chinese provinces from 2005 to 2021. The study shows that WRT can significantly improve the regional WUE, and these results remain valid after a series of robustness tests, such as the parallel trend test, placebo test, and PSM-DID. Mechanistic analysis revealed that WRT can produce the Porter effect, which affects the WUE through technological innovation. The results of the heterogeneity analysis based on the synthetic control method (SCM) showed that WRT effectively improved WUE in Jiangxi, Henan, Ningxia, Hubei, and Guangdong, but did not achieve the expected effect in Inner Mongolia or Gansu. This paper provides solid empirical support for assessing the effectiveness of WRT and accelerating the process of establishing a unified national WRT market in China by 2025. [ABSTRACT FROM AUTHOR]