Search

The boronizing treatment has been an effective way to strengthen and enhance the lubrication performance of alloys. However, the traditional power-pack boronizing method has been limited due to its time-consuming. Improving the boronizing efficiency is highly demanded for the strengthening and industry application of the high-entropy alloys (HEAs). In this study, the electrochemical boronizing strategy was applied to improve the surface hardness and self-lubrication performance of AlCoCrFeNi 2.1 eutectic HEA (EHEA). The microstructure, phase formation and hardness of boronized alloys were studied. Results confirm the high efficiency of electrochemical boronizing to form a boronized layer with a thickness of about 35 μm in 30 min. The surface hardness of the boronized AlCoCrFeNi 2.1 HEA reached to about 18 GPa due to the presence of NiB, FeB and Cr 3 B 4 in the boronized layer. Tribological tests reveal that the self-lubrication property of AlCoCrFeNi 2.1 HEA in water condition was significantly enhanced by the electrochemical boronizing treatment, e.g., the friction and wear reductions reach to about 25% and 80%, respectively. Lubrication mechanism investigation by X-ray photoelectron spectroscopy (XPS) analysis showed the formation of a H 3 BO 3 tribofilm on the sliding surface during the friction process, which effectively reduce friction and wear. This study provided a novel and fast approach for surface hardening and self-lubrication enhancement of HEA systems using the electrochemical boronizing strategy. • A boronized layer was obtained on the AlCoCrFeNi 2.1 alloy surface in 30 min. • The surface hardness was about 4 times higher than that of the original EHEA. • The self-lubrication performance of boronized EHEAs in the water is excellent. • The lubrication enhancement was due to the in-situ formation of H 3 BO 3 tribofilm. [ABSTRACT FROM AUTHOR]