Search

Titanium (Ti) and Ti alloys possess extensive applications in the medical field due to their non-toxic, biocompatible, and antibacterial properties. This study investigates the biocompatibility enhancement of a Ti-based alloy, Ti-6Al-4V, through a multi-step process involving cathodic arc ion plating of a TiZrTa thin film and subsequent laser-textured oxidation (LTO). LTO treatment produced a structured microtopography with regular groove patterns, including straight lines (L-s), circles (L-c), and checkboards (L-ch), resulting in surface oxidation and the formation of various oxides on the TiZrTa coating. Microstructure analyses revealed substantial alterations in surface topography induced by laser texturing. Antibacterial assessments against Staphylococcus aureus (S. aureus) showed that the films with LTO treatment did not exhibit significant advantages after 12 or 24 h of coculture because the laser-textured portions consisted of a combination of the film and the substrate, and the antibacterial effect was not obvious. Coatings with LTO treatment significantly improved L-929 mouse fibroblasts cell viability at 48 h, particularly for samples with a 50 μm spacing of straight and circular patterns (L-s and L-c). After two weeks of MG-63 human osteosarcoma cell culture, the viability of all samples reached similar levels. It suggested that the TiZrTa-coated Ti-6Al-4V exhibited good biocompatibility with both cells. This study contributed to the understanding of surface modification techniques for enhancing the biocompatibility of Ti-based alloys in biomedical applications. • A TiZrTa thin film with LTO treatment was applied onto Ti-6Al-4V alloys. • LTO produced regular groove patterns and resulted in superior hydrophilicity. • LTO-treated thin films did not have obvious antibacterial improvement of S. aureus. • LTO-treated thin films improved the cell viability of both L-929 and MG-63 cells. [ABSTRACT FROM AUTHOR]

The surface characteristics of biomaterials play an important role in their interaction with biological systems. Tantalum (Ta) oxides and their coatings have been proved to increase their applications in the biomedical fields such as medical devices and dental implants by improving their osseointegration and corrosion resistance. In this study, Ta and amorphous tantalum oxide coatings were deposited by using magnetron sputtering. A hydrophilic crystalline β-Ta 2 O 5 coating was obtained by rapid thermal annealing of the deposited tantalum oxide coating at 700 °C. In this study, Staphylococcus aureus and Actinobacillus actinomycetemcomitans ( A. actinomycetemcomitans ) are Gram-positive and Gram-negative bacteria, respectively, that exhibit physiological commensalism on the human skin and oral areas. Both bacteria were chosen as the model for in vitro anti-bacterial analyses by a fluorescence staining method employing Syto9. The cytocompatibility of human skin fibroblast cells (CCD-966SK) on the coatings was also determined using an MTT assay. It showed that the amorphous tantalum oxide coatings possessed good antibacterial performance, while the hydrophilic crystalline tantalum oxide coatings exhibited outperformed human skin fibroblast cellular biocompatibility. [ABSTRACT FROM AUTHOR]

Abstract: Composite metal nitride–metal (MeN–Me) physical vapor deposited (PVD) films (e.g. TaN–Cu, TiN–Cu, ZrN–Ag, etc.) are often considered for applications such as tribological and antibacterial coatings. In this study, ZrN, ZrO2–Ag and ZrNO–Ag coatings with different Ag contents were deposited by reactive magnetron sputtering. Monoclinic ZrO2 and fcc Ag composite structures were obtained when Zr and Ag were cosputtered to react with oxygen. ZrNO–Ag showed a porous structure containing monoclinic ZrO2, fcc Ag and Zr2ON2. Actinobacillus actinomycetemcomitans (A. actinomycetemcomitans) and Staphylococcus aureus (S. aureus), major pathogens frequently found in the implant-associated infections, were cultured on the coated samples. The antibacterial effects were determined using in vitro anti-bacterial analyses by a fluorescence staining method employing Syto9 and bacterial viability agar tests. In addition, the biocompatibility of human gingival fibroblast (HGF) cells on coatings was also evaluated by a MTT test assay. It showed that the nanostructure and Ag content of the ZrO2–Ag and ZrNO–Ag coatings were correlated with the biocidal property. The ZrN coating deposited by magnetron sputtering did not improve the bacterial reduction of A. actinomycetemcomitans and S. aureus. The ZrO2–Ag and ZrNO–Ag coated samples had lower bacterial retention, and the ZrNO–Ag coatings with silver content of 11.8at.% possessed the best antibacterial performance with excellent HGF cell compatibility as well. [Copyright &y& Elsevier]

Abstract: Titanium-based materials have been used for dental implants due to their excellent biological compatibility, superior mechanical strength and high corrosion resistance. The osseointegration of titanium dental implants is related to their composition and surface treatment. A better anti-bacterial performance of the abutment seated in the prosthetic crown is beneficial for the osseointegration and for avoiding the infection after implantation surgery. In this study, TaN-Ag coatings with different Ag contents were deposited on a bio-grade pure Ti dental implant material. A twin-gun magnetron sputtering system was used for the deposition of TaN-Ag coatings. The Ag content in the deposited coatings was controlled by the magnetron power ratio of Ag/(Ta+Ag) targets. To verify the susceptibility of implant surface to bacterial adhesion, Staphylococcus aureus, one of the major pathogen frequently found in the implant-associated infections, was chosen for in vitro anti-bacterial analyses. In addition, the biocompatibility of human gingival fibroblast (HGF) cells on coatings was also evaluated. A composite structure of crystalline TaN and Ag nanoparticles was identified. The TaN-Ag coating with the highest Ag content of 21.4at.% possessed the lowest bacterial retention and viability of S. aureus. From the MTT assay test, the mean optical density values for the TaN and TaN-Ag coated samples after 72h of HGF adhesion were greater than the value obtained from the uncoated Ti. The results suggested that the TaN-Ag coatings improve antibacterial performance with compatible biological response. [ABSTRACT FROM AUTHOR]

Development of oxide films on metallic implants with a desirable combination of mechanical properties and biocompatibility can greatly improve its functionality and application to the medical implant field. The present work is aimed to fabricate titanium (Ti) or zirconium (Zr) oxide films with porous structures onto Ti substrates by micro-arc oxidation (MAO) procedure. Before the MAO treatment, a series of Ti Zr alloy films were deposited on polished pure Ti substrates using a cathodic arc deposition system with different deposition cathode current ratios of Zr/Ti. The post-MAO-treated surface layers were characterized for its composition, crystalline structure, bonding states, surface morphology, and wettability. The results showed that porous crystalline titanium and zirconium oxides were formed using the MAO treatment for the Ti Zr films. To evaluate the bioactivity, cell viability and gene expression of human osteosarcoma cell line (MG-63) and human skin fibroblast cell line (SKF) cultured on different Ti Zr oxide films were determined. The results of MTT tests showed that the higher cell viability of MG-63 and SKF cells was found in MAO-treated Ti Zr films with higher Zr content. Gene expression data by RT-PCR and agarose gel electrophoresis showed that MG-63 cells and SKF cells exhibited notable osteogenic gene expression, such as Runx2, ALP, Dlx-5, OCN, BMP-2 and BMPR1A. The cell adhesion-related genes, such as fibronectin, collagen types I and III, and laminin were also remarkably expressed in the gel imaging. It suggested that the MAO-treated Ti Zr films were suitable for bone tissue- or soft tissue-derived cell growth and differentiation. The design and fabrication of Ti Zr oxide films with specific composition and porous surface layer with MAO treatment may provide a better material environment for cell bonding, living, and differentiation in dental and orthopedic implants. [ABSTRACT FROM AUTHOR]

Abstract: Tantalum is considered a highly biocompatible metal with high corrosion resistance. Metal-doped amorphous carbon films are gaining interest as an effective surface modifier for medical devices. In this study, tantalum (Ta), TaC/amorphous carbon (a-C), and Ta-containing amorphous hydrogenated carbon films (Ta-C:H) were synthesized using a twin-gun magnetron sputtering system to improve biological properties and explore potential applications for surgical implants or devices. Reactive C2H2, activated by the tantalum plasma in the magnetron sputtering process, was used to deposit the Ta-C:H coatings. The deposited TaC/a-C coatings, in which TaC was embedded in the amorphous carbon matrix as a nanocomposite film, exhibited favorable cell viability of the human osteosarcoma cell line (MG-63), similar to uncoated titanium. Among the examined materials, Ta-C:H coatings exhibited the highest biocompatibility for WS1 human fetal skin fibroblast cells derived from soft tissues and demonstrated the highest biological performance. [Copyright &y& Elsevier]