Search

IABSE Task Group 3.1 has the mandate to define reference results for the validation of methodologies and programs used to study both stability and buffeting responses of long-span bridges. To this end, the working group set up a benchmark procedure consisting of several steps with increasing complexity to define reference results useful for this validation. The simplest step (1.1a) was presented in Part 1. In this paper (Part 2), the contributions and reference results of the second sub-step (1.1c) are discussed. It consists of the simulation of the aeroelastic response of a three-degree-of-freedom bridge deck section forced by turbulent wind, using experimental aerodynamic coefficients measured in a wind tunnel. The increase in complexity, compared to the previous step, involves the experimental definition of unsteady force coefficients that are defined in a limited range of reduced velocities, and inclusion of the lateral motion and horizontal turbulent wind velocity components. Comparison of the different outputs, obtained by Task Group 3.1 participants with the same input data, is presented, revealing differences that are not always negligible. Moreover, the increase in complexity of the test case results in larger spreads of the results compared to the fully analytical case, analysed in Part 1. [ABSTRACT FROM AUTHOR]

IABSE Task Group 3.1 has the mandate to define reference results for the validation of methodologies and programs used to study both stability and buffeting responses of long-span bridges. These tools for the simulation of the aeroelastic behaviour are fundamental in the safe design of bridges and they should be validated. The working group decided to set up a benchmark procedure consisting of several steps to define reference results for this validation. For each step, contributors use their own methodology to simulate the bridge behaviour using the same input data. All the results are then compared, and reference values are defined through statistical analysis. The benchmark procedure is considered as a three-step problem with substeps of increasing difficulty: Step 1 compares numerical results only, Step 2 is validation against wind tunnel experiments, and Step 3 is validation against full-scale data. In this paper, the contributions and the reference results of the simplest initial substep (1.1a) are presented. It consists of the simulation of the aeroelastic response of a two-degree-of-freedom bridge deck section, with analytical aerodynamic coefficients, forced by turbulent wind. Despite the problem's simplicity, differences in some contributions are significant, confirming the necessity of having solid references to validate software programs. [ABSTRACT FROM AUTHOR]