Search

The paper presents the results of the application of the refined calculation guidelines to the analysis of the stress-strain state and fracture resistance of the equipment elements of the NPP primary circuit system with WWER reactor, in particular, the cylindrical part and the zone of the reactor pressure vessel inlet nozzle, coolant collector welded joint in a steam generator, baffle, and reactor internals' shaft under the operating and emergency modes of thermomechanical loading. The calculation methodology is based on the use of the modern models and methods of solution to the nonlinear boundary tasks of non-isothermal thermal viscoplasticity and tasks of fracture mechanics using the refined mixed schemes of the finite element method with increased accuracy. They allow one to obtain reliable solutions to the tasks considering the deformation history of thermomechanical loading, modern concepts of fracture mechanics and approaches to the modeling of brittle-viscous fracture defects, irradiation swelling and creep of metal, as well as as the structural elements, under the conditions of elevated temperature, intensive neutron irradiation and nonstationary modes of thermomechanical loading. The authors obtained and analyzed the calculation results for the cylindrical part and zone of the inlet nozzle of the WWER-1000 reactor pressure vessel, coolant collector welded joint in a steam generator, baffle, and reactor internals' shaft using the proposed guidelines. The results imply the possibilities of the proposed recommendations and make it possible to analyze some general tendencies and features of the application of the refined calculation models to justify the strength and life extension of the NPP structural elements under investigation. [ABSTRACT FROM AUTHOR]

For a reactor pressure vessel steel 15Kh2MFA(III) experiments and calculations have been carried out to study the factors that have an influence on the increase of the lower-shelf fracture toughness in the temperature dependence diagrams upon warm prestressing. Stereoscopic fractography and numerical investigation have demonstrated that after the warm prestressing the crack tip remains blunt. This reduces the stress singularity during subsequent loading and raises the material fracture toughness. The paper gives the calculated data on residual stresses and crack-tip opening displacement during warm prestressing and upon relief. The calculated results are shown to agree well with the known analytical relations and experimental data. [ABSTRACT FROM AUTHOR]