Search

COMpton Polarimeter with Avalanche Silicon readout (COMPASS) is a research and development project that aims to measure the polarization of X-ray photons through Compton Scattering. The measurement is obtained by using a set of small rods of fast scintillation materials with both low-Z (as active scatterer) and high-Z (as absorber), all read-out with Silicon Photomultipliers. By this method we can operate scattering and absorbing elements in coincidence, in order to reduce the background. In the laboratory we are characterising the SiPMs using different types of scintillators and we are optimising the performances in terms of energy resolution, energy threshold and photon tagging efficiency. We aim to study the design of two types of satellite-borne instruments: a focal plane polarimeter to be coupled with multilayer optics for hard X-rays and a large area and wide field of view polarimeter for transients and Gamma Ray Bursts. In this paper we describe the status of the COMPASS project, we report about the laboratory measurements and we describe our future perspectives.

The Cherenkov Telescope Array (CTA) is a worldwide new gene ration project aimed at realizing an array of a hundred ground based gamma-ray telescopes. ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is the Italian project whose primary target is the development of an end-to-end prototype, named ASTRI SST-2M, of the CTA small size class of telescopes devoted to investigation of the highest energy region, from 1 to 100 TeV. Next target is the implementation of an ASTRI/CTA mini-array based on seve n identical telescopes. Silicon Photo-Multipliers (SiPMs) are the semiconductor photosensor devices designated to constitute the camera detection system at the focal plane of the ASTRI telescopes. SiPM photosensors are suitable for the detection of the Cherenkov flashes, since they are very fast and sensitive to the light in the 300-700nm wavelength spectrum. Their drawbacks compared to the traditional photo-multiplier tubes are high dark count rates, after-pulsing and optical cross-talk contributions, and intrinsic gains strongly dependent on temperature. Nonetheless, for a single pixel, the dark count rate is well below the Night Sky Background, the effects of cross-talk and afterpulses are typically lower th an 20%, and the gain can be kept stable against temperature variations by means of adequate bias voltage compensation strategies. This work presents and discusses some experimental results from a large set of measurements performed on the SiPM sensors to be used for the ASTRI SST-2M prototype camera and on recently developed detectors demonstrating outstanding performance for the future evolution of the project in the ASTRI/CTA mini-array. Keywords: ASTRI, CTA, detectors, characterizations, phot on detection efficiency, silicon photomultipliers.

In the context of the Cherenkov Telescope Array observatory project, the ASTRI SST-2M end-to-end prototype telescope, entirely supported by the Italian National Institute of Astrophysics, is designed to detect cosmic primary gamma ray energies from few TeV up to hundreds of TeV. The ASTRI SST-2M prototype camera is part of the challenging synergy of novel optical design, camera sensors, front-end electronics and telescope structure design. The camera is devoted to imaging and recording the Cherenkov images of air showers induced by primary particles into the Earth’s atmosphere. In order to match the energy range mentioned above, the camera must be able to trigger events within a few tens of nanoseconds with high detection efficiency. This is obtained by combining silicon photo-multiplier sensors and suitable front-end electronics. Due to the characteristic imprint of the Cherenkov image that is a function of the shower core distance, the signal dynamic range of the pixels and consequently of the front-end electronics must span three orders of magnitude (1:1000 photo-electrons). These and many other features of the ASTRI SST-2M prototype camera will be reported in this contribution together with a complete overview of the mechanical and thermodynamic camera system.