Search

Searching for evidence of inflation by measuring B-modes in the cosmic microwave background (CMB) polarization at degree angular scales remains one of the most compelling experimental challenges in cosmology. BICEP2 and the Keck Array are part of a program of experiments at the South Pole whose main goal is to achieve the sensitivity and systematic control necessary for measurements of the tensor-to-scalar ratio at σ(r) ~0:01. Beam imperfections that are not sufficiently accounted for are a potential source of spurious polarization that could interfere with that goal. The strategy of BICEP2 and the Keck Array is to completely characterize their telescopes' polarized beam response with a combination of in-lab, pre-deployment, and on-site calibrations. We Sereport the status of these experiments, focusing on continued improved understanding of their beams. Far-field measurements of the BICEP2 beam with a chopped thermal source, combined with analysis improvements, show that the level of residual beam-induced systematic errors is acceptable for the goal of σ(r) ~ 0:01 measurements. Beam measurements of the Keck Array side lobes helped identify a way to reduce optical loading with interior cold baffles, which we installed in late 2013. These baffles reduced total optical loading, leading to a ~ 10% increase in mapping speed for the 2014 observing season. The sensitivity of the Keck Array continues to improve: for the 2013 season it was 9:5 μK _/s noise equivalent temperature (NET). In 2014 we converted two of the 150-GHz cameras to 100 GHz for foreground separation capability. We have shown that the BICEP2 and the Keck Array telescope technology is sufficient for the goal of σ(r) ~ 0:01 measurements. Furthermore, the program is continuing with BICEP3, a 100-GHz telescope with 2560 detectors. © (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

The BICEP2 and Keck Array experiments are designed to measure the polarization of the cosmic microwave background (CMB) on angular scales of 2-4 degrees (l=50-100). This is the region in which the B-mode signal, a signature prediction of cosmic inflation, is expected to peak. BICEP2 was deployed to the South Pole at the end of 2009 and is in the middle of its third year of observing with 500 polarization-sensitive detectors at 150 GHz. The Keck Array was deployed to the South Pole at the end of 2010, initially with three receivers--each similar to BICEP2. An additional two receivers have been added during the 2011-12 summer. We give an overview of the two experiments, report on substantial gains in the sensitivity of the two experiments after post-deployment optimization, and show preliminary maps of CMB polarization from BICEP2., Presented at SPIE Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VI, July 6, 2012. To be published in Proceedings of SPIE Volume 8452

Bicep2 deployed to the South Pole during the 2009-2010 austral summer, and is now mapping the polarization of the cosmic microwave background (CMB), searching for evidence of inflationary cosmology. Bicep2 belongs to a new class of telescopes including Keck (ground-based) and Spider (balloon-borne) that follow on Bicep's strategy of employing small, cold, on-axis refracting optics. This common design provides key advantages ideal for targeting the polarization signature from inflation, including: (i) A large field of view, allowing substantial light collecting power despite the small aperture, while still resolving the degree-scale polarization of the CMB; (ii) liquid helium-cooled optics and cold stop, allowing for low, stable instrument loading; (iii) the ability to rotate the entire telescope about the boresight; (iv) a baffled primary aperture, reducing sidelobe pickup; and (v) the ability to characterize the far field optical performance of the telescope using ground-based sources. We describe the last of these advantages in detail, including our efforts to measure the main beam shape, beammatch between orthogonally-polarized pairs, polarization efficiency and response angle, sidelobe pickup, and ghost imaging. We do so with ground-based polarized microwave sources mounted in the far field as well as with astronomical calibrators. Ultimately, Bicep2's sensitivity to CMB polarization from inflation will rely on precise calibration of these beam features.

We report on the preliminary detector performance of the B icep 2 mm-wave p olarimeter, deployed in 2009 tothe South Pole. B icep 2 is currently imaging the polarization of the cosmic micro wave bac kground at 150 GHzusing an array of 512 antenna-coupled superconducting bolometers. The antennas, band-de“ning “lters andtransition edge sensor (TES) bolometers are photolithographically fabricated on 4 silicon tiles. Each tile consistsof an 8 × 8 grid of 7 mm spatial pixels, for a total of 256 detector pairs. A spatial pixel contains 2 sets oforthogonal antenna slots summed in-phase, with each set coupled to a TES by a “ltered microstrip. The detectorsare read out using time-domain multiplexed SQUIDs. The detector pair of each spatial pixel is dierenced tomeasure polarization. We report on the performance of the B icep 2 detectors in the “eld, including the focalplane yield, detector and multiplexer optimization, detector noise and stability, and a preliminary estimate ofthe improvement in mapping speed compared to B icep 1.Keywords: Cosmic micr owave bac kground, polarization, TES, noise, in”ation, gravitational waves, cosmology