Search

The SPECTROGREEN ICP-OES analyzer can provide enhanced sensitivity, freedom from interference, and matrix compatibility. DSOI (Dual Side-On Interface) enables radial-view-based analyzers to deliver previously unachievable levels of performance and ease [...]

The need to calibrate and qualify analytical instruments and systems is well recognized in laboratories. However, calibrating and qualifying analytical instruments and systems are seen as discrete tasks. There is an increasing regulatory expectation that a risk-based life cycle approach is necessary to ensure 'fitness for purpose' as part of an analytical procedure. The calibration and qualification lifecycle of analytical instruments and systems is a journey and not a sequence of disconnected events., This article describes the principal stages of the lifecycle in both GXP or ISO/IEC 17025 laboratories that ensure that any analytical instrument and system is 'fit for its intended use' [...]

The SPECTROGREEN ICP-OES analyzer can provide enhanced sensitivity, freedom from interference, and matrix compatibility. DSOI (Dual Side-On Interface) enables radial-view-based analyzers to deliver previously unachievable levels of performance and ease [...]

The Profiler (F) analyzer from Metrohm is designed as an analytical tool that quantifies all fluorine (both organic and inorganic fluoride in solution) to define the total impact of per-and [...]

The ProfilerF analyzer from Metrohm is designed as an analytical tool that quantifies all fluorine (both organic and inorganic fluoride in solution) to define the total impact of per-and polyfluoroalky [...]

Risk management is one of the new requirements for the pharmaceutical industry following the publication of the Food and Drug Administration's (FDA) 'Good Manufacturing Practices (GMPs) for the 21st Century' [...]

The United States Pharmacopeia general chapter on analytical instrument qualification (USP ) and the ISPE's Good Automated Manufacturing Practice (GAMP) Good Practice Guide on laboratory computerized systems are the two [...]

It is just over two years since USP on Analytical Instrument Qualification (AIQ) became effective. To coincide with the American Association of Pharmaceutical Scientists (AAPS) Meeting in New Orleans this [...]

United States Pharmacopoeia (USP) general chapter 1058 on analytical instrument qualification (AIQ) has finally become official and was released in August 2008 in the first supplement to the USP XXXI […]

Rigaku's NEX LS energy dispersive X-ray fluorescence (EDXRF) scanner is designed to perform multi-element composition coat weight, and coating thickness analyses for web and coil applications. According to the company, [...]

Rigaku's NEX LS energy dispersive X-ray fluorescence (EDXRF) scanner is designed to perform multi-element composition, coat weight, and coating thickness analyses for web and coil applications. According to the company, [...]

Analytik Jena's multi N/C series of analyzers are designed for surface and wastewater investigations in the environmental sector, and high-purity water in the semiconductor or pharmaceutical industry. According to the [...]

The UV-i group of UV-vis spectrophotometers from Shimadzu are designed to provide improved quality control productivity, data analysis and management, and operating efficiency. According to the company, the series includes [...]

The Virsa Raman analyzer from Renishaw is designed for reliable and detailed remote analysis. According to the company, the analyzer enables the expansion of applications of Raman spectroscopy to a [...]

The GLA131 series microportable greenhouse gas analyzer from ABB is designed for reporting measurements of methane, carbon dioxide, and water vapor simultaneously in a package that is compact, crushproof, and [...]

ABB'S MB-Rx in-situ reaction monitoring analyzer is designed to provide plug-and-play analyses for research laboratories and pilot plants. According to the company, the analyzer offers chemists direct access to real-time [...]

The UV-i group of UV-vis spectrophotometers from Shimadzu are designed to provide improved quality control productivity, data analysis and management, and operating efficiency. According to the company, the series includes [...]

The Raman Rxn2 analyzer from Kaiser Optical Systems is designed to provide high-resolution, research-grade Raman spectra on a portable platform for process development monitoring and control. According to the company, [...]

ABB's MB-Rx in-situ reaction monitoring analyzer is designed to provide plug-and-play analyses for research laboratories and pilot plants. According to the company, the analyzer offers chemists direct access to real-time [...]

The Virsa Raman analyzer from Renishaw is designed for detailed remote analysis. According to the company, the analyzer is a fiber optic coupled spectroscopy system that includes a spectrometer with [...]

Starna's range of certified reference materials (CRMs) for UV-visible spectrophotometer qualifications are designed to provide tailored solutions, advice, and support for a given situation. According to the company, the CRMs [...]

Starna's range of certified reference materials (CRMs) for UV-visible spectrophotometer qualifications are designed to provide tailored solutions, advice, and support for a given situation. According to the company, the CRMs [...]

ABB's MB-RX in situ reaction monitoring analyzer is designed to provide plug-and-play analyses for research laboratories and pilot plants. According to the company, the analyzer offers chemists direct access to [...]

Shimadzu Scientific's IRSpirit FT-IR spectrophotometer is designed for space efficiency in the laboratory, allowing access from two sides and providing a wide sample compartment. According to the company, the instrument [...]

Spectra's SPECTROGREEN inductively coupled plasma-optical emission spectrometry (ICP-OES) analyzer is designed with Dual Side-On Interface technology that uses a vertical plasma torch, observed via a new variety of direct radial-view [...]

Rigaku's ResQ CQL 1064-nm handheld Raman analyzer is designed for chemical threat identification. According to the company, the unit's ergonomics, analytical performance, and sample presentation enable identification of suspicious powders, [...]

An application note from Renishaw describes how its RA802 pharmaceutical analyzer can be used to screen a range of pharmaceutical samples for the presence and crystalline form of active pharmaceutical [...]

The UV-1900 UV-vis spectrophotometer from Shimadzu is designed for analysis in foods, pharmaceuticals, life sciences, chemistry, and electronics applications. According to the company, the spectrophotometer has a color touch panel [...]

Analytik Jena's multi N/C pharma series total organic carbon (TOC) analyzer is designed for surface and wastewater testing in the environmental sector, semiconductor, and pharmaceutical industries. According to the company, [...]

An application note from Renishaw describes how its RA802 pharmaceutical analyzer can be used to screen a range of pharmaceutical samples for the presence and crystalline form of active pharmaceutical [...]

Rigaku's ResQ CQL 1064-nm handheld Raman analyzer is designed for chemical threat identification. According to the company, the unit's ergonomics, analytical performance, and sample presentation enable identification of suspicious powders, [...]

The DS5 UV-vis spectrophotometer from Edinburgh Instruments is designed with a dual lamp and Czerny-turner configuration monochromator. According to the company, the spectrophotometer features a compact high-throughput optical system, low [...]

Spectra's SPECTROGREEN inductively-coupled plasma-optical emission spectrometry (ICP-OES) analyzer is designed with Dual Side-On Interface technology that uses a vertical plasma torch, observed via a new variety of direct radial-view technology. [...]

ABB's MB3600-CH30 FT-NIR laboratory analyzer for biodiesel is designed for determining biodiesel properties in final product and mid-batch biodiesel samples from vegetable oil transesterification reactors. According to the company, the [...]

Shimadzu Scientific's IRSpirit FT-IR spectrophotometer is designed for space efficiency in the laboratory, allowing access from two sides, and providing a wide sample compartment. According to the company, the instrument [...]

The RamanRXN2 Multichannel analyzer from Kaiser is designed to provide high-resolution, research-grade Raman spectra on a portable platform for process development monitoring and control. According to the company, a single [...]

Renishaw's RA816 biological analyzer is designed as a compact benchtop Raman imaging system. According to the company, the analyzer is suitable for biological and clinical research, and enables the collection [...]

The RamanRXN2 Multichannel analyzer from Kaiser is designed to provide high-resolution, research-grade Raman spectra on a portable platform for process development monitoring and control. According to the company, a single [...]

The UV-1900 UV-vis spectrophotometer from Shimadzu is designed for analysis in foods, pharmaceuticals, life sciences, chemistry, and electronics applications. According to the company, the spectrophotometer has a color touch panel [...]

The Renishaw biological analyzer, RA816, is designed as a compact benchtop Raman imaging system. According to the company, the analyzer is designed for biological and clinical research, and enables the [...]

The XLNCE SMX-BEN XRF analyzer from EDAX is designed for rapid, nondestructive coating thickness and composition analysis. According to the company, the benchtop analyzer is a metrology tool for process [...]

The handheld ChemLite laser metals analyzer from TSI reportedly is based on laser-induced breakdown spectroscopy. According to the company, the analyzer is suitable for sorting scrap metal, including light elements, [...]

Metrohm's Mira handheld Raman analyzer is designed for identification, screening, and confirmation of measurements through a blend of optical sampling configurations. According to the company, users can perform Raman analyses [...]

Extended spectral range versions of SciAps' Z-100 and Z-500 handheld laser-induced breakdown spectroscopy analyzers reportedly have spectral ranges of 196-850 nm and 185-850 nm, respectively, with continuous wavelength coverage. According [...]

Rigaku's Katana handheld laser-induced breakdown spectroscopy analyzer is designed fox alloy identification for use in scrap metal sorting, (quality assurance in metal fabrication, and positive material identification in petrochemical operations. [...]

The TSI® LIBS Desktop Analyzer laser induced breakdown spectroscopy (LIBS) instrument allows simultaneous determination of all detectable elements present in the material being analyzed. In LIBS, a laser pulse is [...]

The basic characteristics of variable filter array (VFA) spectrometers, both near- and mid-infrared, available from several manufacturers, make them well suited for routine infrared analysis applications outside and inside the […]

The major drawback of a potassium dichromate (PDC) reference solution intended for checking the accuracy of the photometric scale of an analytical absorption spectrophotometer is its lack of broad wavelength [...]

Milestone's DMA-80 direct mercury analyzer is designed to provide results that are comparable to traditional techniques in as little as 5 min per sample. According to the company, the analyzer [...]

The RamanRXN2 Multichannel analyzer from Kaiser is designed to provide high-resolution, research-grade Raman spectra on a portable platform for process development monitoring and control. According to the company, a single [...]