Search

Raman spectroscopy is a powerful technique for materials analysis, and we are developing and analyzing a remote Raman system for use on a planetary lander or rover. We have acquired data at a distance of 10 m from a variety of geologic materials using different instrument designs. We have employed a pulsed laser with both an ungated detector and a gated detector. A gated detector can reduce long-lived fluorescence while still collecting all Raman signal. In order to design a flight instrument, we need to quantify how natural surfaces will respond to laser stimulus. We define remote Raman efficiency of natural surfaces as the ratio of radiant exitance leaving a natural surface to the irradiance of the incident laser. The radiant exitance of a natural surface is the product of the sample radiance, the projected solid angle, and the full-width-half-maximum of the Raman signal. We have determined the remote Raman efficiency for a variety of rocks and minerals. The best efficiencies are achieved for large, clear, single crystals that produce the most radiant exitance, while darker fine-grained mineral mixtures produce lower efficiencies. By implementing a pulsed laser, gated detector system we have improved the signal detection and have generally decreased the integration time necessary to detect Raman signal from natural surfaces.

We have designed and developed two breadboard versions of stand-off Raman spectroscopic systems for landers based on a 5-in. Maksutov-Cassegrain telescope and a small (4-in. diameter) Newtonian telescope receiver. These systems are capable of measuring the Raman spectra of minerals located at a distance of 4.5-66 m from the telescope. Both continuous wave (CW) Ar-ion and frequency doubled Nd:YAG (532 nm) pulsed (20 Hz) lasers are used as excitation sources for measuring remote Raman spectra of rocks and minerals. We have also made complementary measurements on the same rock samples with a micro-Raman system in 180 and 135 degrees geometry for evaluating the system performance and for estimating effect of grain size and laser-induced heating on the spectra of minerals using alpha-quartz as a model mineral. A field portable remote pulsed Raman spectroscopic system based on the 5-in. telescope and an f/2.2 spectrograph has been developed and tested. We have also demonstrated a prototype of a combined Raman and laser-induced breakdown spectroscopy (LIBS) system, capable of providing major element composition and mineralogical information on both biogenic and inorganic minerals at a distance of 10 m from the receiver.