Search

Double-rotation (DOR) solid-state NMR spectroscopy is a high-resolution technique developed in the late 1980s. Although multiple-quantum magic-angle spinning (MQMAS) became the most widely used high-resolution method for half-integer spin quadrupoles after 1995, development and application of DOR NMR to a variety of chemical and materials science problems has endured. This Trend article recapitulates the development of DOR NMR, discusses various applications, and describes possible future directions. The main technical limitations specific to DOR NMR are simply related to the size of the double rotor system. The relatively large outer rotor (and thus coil) used for most applications over the past 35 years translates into relatively low rotor spinning frequencies, a low filling factor, and weak radiofrequency powers available for excitation and for proton decoupling. Ongoing developments in NMR instrumentation, including ever-shrinking MAS rotors and spherical NMR rotors, could solve many of these problems and may augur a renaissance for DOR NMR. [Display omitted] • Advances in double-rotation solid-state NMR spectroscopy are reviewed. • DOR NMR provides high-resolution spectra of quadrupolar nuclei in one dimension. • Limitations include a poor filling factor, low spinning rates, and low rf powers. • New developments in magic angle spinning technology could reinvigorate DOR NMR. [ABSTRACT FROM AUTHOR]

The design and implementation of a software package for the analysis of single-crystal NMR data is presented. The SCFit software can treat spectra arising from various interactions: (i) chemical shift tensor only; (ii) chemical shift tensor and quadrupolar coupling tensor; (iii) dipolar and indirect nuclear spin-spin coupling tensors; (iv) all four interactions. The software is demonstrated on recently reported 17O and 31P single-crystal NMR data for triphenylphosphine oxide and for two of its halogen-bonded cocrystals. The 17O single-crystal NMR data represent a case where all four above-mentioned interactions simultaneously affect the spectra. SCFit can fit the chemical shift and quadrupolar coupling in two ways: (i) through an unconstrained fitting process where all tensor parameters are freely optimized or (ii) through a constrained fitting process where the principal components of the tensors may be fixed to values known previously with high precision via the analysis of powder samples. The second strategy is explored in an effort to reduce the number of unknowns in the fitting process; an improvement in the precision of the resulting tensor orientations is noted in some cases. Image 1 • SCFit software for analyzing single-crystal NMR data is described. • Chemical shift, quadrupolar, and spin-spin coupling interactions are treated. • The utility of fixing tensor magnitudes to known values is explored. [ABSTRACT FROM AUTHOR]

Weak hydrogen bonds are important structure-directing elements in supramolecular chemistry and biochemistry. We consider here weak CH⋯O hydrogen bonds in a series of cocrystals of theophylline and caffeine and assess to what extent the CH⋯O distance and angle govern the observed 13C and 1H isotropic chemical shifts. Gauge-including projector-augmented wave density functional theory (GIPAW DFT) calculations consistently predict a decrease in the 13C and 1H magnetic shielding constants upon hydrogen bond formation on the order of 2–5 ppm (13C) and 1–2 ppm (1H). These trends are reproduced using the machine-learning approach implemented in ShiftML. Experimental 13C and 1H chemical shifts obtained for powdered samples using one-dimensional NMR spectroscopy as well as heteronuclear correlation (HETCOR) spectroscopy correlate well with the GIPAW DFT results. However, the experimental 13C NMR response only correlates moderately well with the hydrogen bond length and angle, while the experimental 1H chemical shifts only show very weak correlations to these local structural elements. DFT computations on isolated imidazole-formaldehyde models show that the 13C and 1H chemical shifts generally decrease with the C⋯O distance but show no clear dependence on the CH⋯O angle. These results demonstrate that the 13C and 1H response to weak CH⋯O hydrogen bonding is influenced significantly by additional weak contacts within cocrystal heterodimeric units. [Display omitted] • Weak CH⋯O hydrogen bonds involving the methine group of imidazole ring fragments are investigated. • Experimental 13C and 1H chemical shifts for solid cocrystals of caffeine and theophylline are assessed. • GIPAW-DFT, ShiftML machine learning, and cluster model calculations show the impact of hydrogen bond geometry on chemical shift response. • The most robust correlation is noted between the 13C isotropic chemical shift and the hydrogen bond length. [ABSTRACT FROM AUTHOR]

The vaterite polymorph of CaCO 3 has puzzled crystallographers for decades in part due to difficulties in obtaining single crystals. The multiple proposed structures for the vaterite polymorph of CaCO 3 are assessed using a combined 43 Ca solid-state nuclear magnetic resonance (SSNMR) spectroscopic and computational approach. A combination of improved experimental and computational methods, along with a calibrated chemical shift scale and 43 Ca nuclear quadrupole moment, allow for improved insights relative to our earlier work (Bryce et al., J. Am. Chem. Soc. 2008, 130, 9282). Here, we synthesize a 43 Ca isotopically-enriched sample of vaterite and perform high-resolution quadrupolar SSNMR experiments including magic-angle spinning (MAS), double-rotation (DOR), and multiple-quantum (MQ) MAS experiments at magnetic field strengths of 9.4 and 21.1 T. We identify one crystallographically unique Ca 2+ site in vaterite with a slight distribution in both chemical shifts and quadrupolar parameters. Both the experimental 43 Ca electric field gradient tensor and the isotropic chemical shift for vaterite are compared to those calculated with the gauge-including projector-augmented-wave (GIPAW) DFT method in an attempt to identify the model that best represents the crystal structure of vaterite. Simulations of 43 Ca DOR and MAS NMR spectra based on the NMR parameters computed for a total of 18 structural models for vaterite allow us to distinguish between these models. Among these 18, the P 3 2 21 and C 2 structures provide simulated spectra and diffractograms in best agreement with all experimental data. [ABSTRACT FROM AUTHOR]

Abstract: Using 31P solid-state NMR spectroscopy, anisotropy in the indirect 199Hg-31P spin–spin coupling tensor (ΔJ) for powdered [HgPCy3(OAc)2]2 (1) has been measured as 4700±300Hz. Zeroth-order regular approximation (ZORA) density functional theory (DFT) calculations, including scalar and spin-orbit relativistic effects, performed on 1 and a series of other related compounds show that ΔJ(199Hg, 31P) arises entirely from the ZORA Fermi-contact–spin-dipolar cross term. The calculations validate assumptions made in the spectral analysis of 1 and in previous determinations of ΔJ in powder samples, namely that J is axially symmetric and shares its principal axis system with the direct dipolar coupling tensor (D). Agreement between experiment and theory for various 199Hg, 31P spin–spin coupling anisotropies is reasonable; however, experimental values of 1 J(199Hg, 31P)iso are significantly underestimated by the calculations. The most important improvements in the agreement were obtained as a result of including more of the crystal lattice in the model used for the calculations, e.g., a change of 43% was noted for 1 J(199Hg, 31P)iso in [HgPPh3(NO3)2]2 depending on whether the two or three nearest nitrate ions are included in the model. Finally, we have written a computer program to simulate the effects of non-axial symmetry in J and of non-coincidence of the J and D on powder NMR spectra. Simulations clearly show that both of these effects have a pronounced impact on the 31P NMR spectrum of 199Hg–31P spin pairs, suggesting that the effects should be observable experimentally if a suitable compound can be identified. [Copyright &y& Elsevier]

This Virtual Special Issue brings together new and original research articles covering a range of industrial applications of solid-state NMR. The issue comprises six original research articles as well as a report entitled Solid State NMR Service Across the World. Industrial applications of solid-state NMR are not necessarily always as widely publicized as are academic applications or applications of solution NMR in industry. [Extracted from the article]

Highlights from the article: High-frequency dynamic nuclear polarization nuclear magnetic resonance (DNP NMR) spectroscopy is having a significant impact across disciplines by breaking down traditional barriers in solid-state NMR. Blank and coworkers report on SP 1 sp H polarization enhancement of up to 150 via DNP of a plasma-treated glucose powder.

Abstract: We present a new program for the exact simulation of solid-state NMR spectra of quadrupolar nuclei in stationary powdered samples which employs diagonalization of the combined Zeeman-quadrupolar Hamiltonian. The program, which we call QUEST (QUadrupolar Exact SofTware), can simulate NMR spectra over the full regime of Larmor and quadrupolar frequency ratios, which encompasses scenarios ranging from high-field NMR to nuclear quadrupole resonance (NQR, where the Larmor frequency is zero) and does not make use of approximations when treating the quadrupolar interaction. With the use of the fast powder averaging scheme of Alderman, Solum, and Grant , exact NMR spectral simulations are only marginally slower than the second-order perturbation theory counterpart. The program, which uses a graphical user interface, also incorporates chemical shift anisotropy and non-coincident chemical shift and quadrupolar tensor frames. The program is validated against newly-acquired experimental data through several examples including: the low-field 79/81Br NMR spectra of CaBr2, the 14N overtone NMR spectrum of glycine, the 187Re NQR spectra of Re2(CO)10, and lastly the 127I overtone NQR spectrum of SrI2, which, to the best of our knowledge, represents the first direct acquisition of an overtone NQR spectrum for a powdered sample. [Copyright &y& Elsevier]

Carboxylate paddlewheels and their oxo-bridged analogues constitute ideal building blocks for the assembly of two- and three-dimensional framework materials. Here, we present a multinuclear ( 1 H, 13 C, 93 Nb, 95 Mo) magnetic resonance study of solid samples of Nb 2 OCl 6 (O 2 Ph) 2 ( 1 ), Mo 2 (O 2 CMe) 4 ( 2 ), and Mo 2 (O 2 CCHF 2 ) 4 ( 3 ). High-resolution proton and 13 C CP/MAS NMR spectra provide valuable information on structure and crystal symmetry and on cocrystallized solvent. 93 Nb solid-state NMR spectra of 1 provide quadrupolar coupling constants and chemical shift tensors which are characteristic of the axially asymmetric Nb-O-Nb bridging environment. 95 Mo solid-state NMR spectra of 2 and 3 provide quadrupolar coupling constants and chemical shift tensors which are directly characteristic of the molybdenum-molybdenum quadruple bonds in these compounds. The quadruple bonds are characterized by particularly large 95 Mo chemical shift tensor spans on the order of 5500 ppm. Density functional theoretical computations provide good agreement with the 93 Nb and 95 Mo experimental data, with some exceptions noted. This work demonstrates possible NMR approaches to characterize more complex framework materials and provides key insight into the Mo-Mo quadruple bond. [ABSTRACT FROM AUTHOR]

Abstract: Recent progress in the development and application of signal enhancement methods for NMR of quadrupolar nuclei in solids is presented. First, various pulse schemes for manipulating the populations of the satellite transitions in order to increase the signal of the central transition (CT) in stationary and rotating solids are evaluated (e.g., double-frequency sweeps, hyperbolic secant pulses). Second, the utility of the quadrupolar Carr–Purcell–Meiboom–Gill (QCPMG) and WURST-QCPMG pulse sequences for the rapid and efficient acquisition of particularly broad CT powder patterns is discussed. Third, less frequently used experiments involving polarization transfer from abundant nuclear spins (cross-polarization) or from unpaired electrons (dynamic nuclear polarization) are assessed in the context of recent examples. Advantages and disadvantages of particular enhancement schemes are highlighted and an outlook on possible future directions for the signal enhancement of quadrupolar nuclei in solids is offered. [Copyright &y& Elsevier]