Search

• Solar energy and PCM are used to augment the indoor steam curing process. • Mathematical model of the curing process is developed. • Comparison with experiments confirms the accuracy of the mathematical modelling. • Benefits of the proposed technology are quantitively demonstrated. Steam is used to provide heating and moisture in the curing process for the production of precast concrete (PC) construction elements. The generation of steam requires large amounts of fossil fuels. This study considers the incorporation of solar thermal energy into the steam curing of PC construction elements for reducing the need for fossil fuels and associated CO 2 emissions. For this purpose, the board made of composite phase change material covers the inner surface of the main sun-facing wall in the heating & curing building. The PCM board is heated by sun rays and accumulates thermal energy during the PCM's phase transition, and this energy then is released to the indoor environment of the building, reducing the amount of steam required to maintain a certain level of temperature during the curing process. The energy consumption simulation software, EnergyPlus, and two physical models (built on the scale of 1:3) were used to study the effects of two different PCMs on the thermal performance of such new type of heating & curing buildings. Composite PCMs considered were GH-33 and GH-37 with 33 and 37 °C melting temperatures developed by the research team. The theoretical and experimental results are in good agreement and demonstrate that, compared to the GH-33, GH-37 PCM increases the temperature of the inner surface of the main sun-facing wall and the upper surface temperature of the PC construction element by 3.4 and 1.4 °C, respectively. The heat accumulation and discharge rates also were greater by 62%. For the investigated design of the building and given location in China, the deployment of studied PCM wall panels results in a reduction in the annual energy consumption and CO2 emissions by 58.6 GJ and 5 tons, respectively. The method developed for applying solar energy and selecting PCMs for augmenting steam curing of PC construction elements can be deployed in different geographical regions. [ABSTRACT FROM AUTHOR]

• Rapid calculation of physical dimensions of passive solar greenhouses was derived. • The correctness of the proposed analytical method was experimentally confirmed. • The rapid calculation method is valid for a wide range of geographical latitudes. Space formation of passive solar greenhouses plays a dominant role in the creation of required lighing and thermal conditions and in increasing the efficiency of solar energy utilisation. In this study, the energy balance equation analysis was implemented in EnergyPlus software to numerically model the thermal performance of a passive solar greenhouse, located in the Beijing Region. Comparison of numerical and experimental data indicated a high prediction accuracy of the numerical model, which then was used to conduct a parametric analysis of the effect of main physical dimensions on the energy performance of such greenhouses. As a result, a range of rational values of physical dimensions was proposed for this type of greenhouses. The originality of the research approach is using parametric analysis data, obtained from the calibrated numerical model of greenhouses, to derive novel analytical correlations for rapid calculation of the main physical dimensions of passive solar greenhouses. The correctness of the proposed novel analytical method for calculation of main physical dimensions of passive solar greenhouses was experimentally confirmed in a series of comparative physical tests on various greenhouse models. The advantage of the proposed analytical correlations is that these are valid for a wide range of geographical latitudes in China and other regions, where a similar type of greenhouses can be exploited. [ABSTRACT FROM AUTHOR]