Search

The instability of extraction structure under the undercut space in the block caving stope presents specific characteristics: rib spalling and floor heave in ore-loading roadway and collapse of major apexes. In order to study the stress and displacement evolution law of extraction structure under undercut space and reveal the instability mechanism of extraction structure, the numerical simulation model of block caving stope was established using the finite difference software FLAC3D. According to the postundercutting strategy in Tongkuangyu Mine in China, extraction structure was formed first in the simulation process, and then the undercut level was divided into eight units for excavation step by step. The stress and displacement of extraction structure after each step of undercutting were monitored and analyzed. Based on the thin plate theory, the mechanism of stress change and deflection deformation of extraction structure was revealed. The research results show that, under the action of high horizontal tectonic stress and vertical stress, the extraction structure under undercut space produces vertical upward bending deformation after undercutting during the block caving. The tension stress concentration gradually appears in the side wall of the ore-loading roadway and the tip of the major apexes; with the increase of the undercutting area, the degree of tensile stress concentration gradually becomes strong; when the tensile strength of the rock mass in extraction structure is exceeded, extraction structure presents instability. It is necessary to make the overlying ore collapse on extraction structure as soon as possible after undercutting, which is beneficial to release the tension stress in the extraction structure under undercutting space.

In geotechnical engineering and geological survey, the stratum structure and its corresponding physical and mechanical properties are the most concerned. The stratum structure not only affects the safety of the project but also plays a decisive role in the construction method and construction sequence. In this paper, a new type of stratum geological interface recognition system is adopted, and an R-20 rotary drilling rig is used to conduct on-site drilling experiments for a granite site with no ventilation. The research results show that the system can monitor and record the main parameters (axial pressure, drilling rate, rotation speed, flushing fluid pressure, and torque) of the drilling rig during the drilling process. The comparative analysis of monitoring data and on-site survey results shows that different drilling parameters have different sensitivities to changes in the formation structure. According to the prediction accuracy, the ranking from high to low is drilling rate, axial pressure, torque, rotation speed, and flushing fluid pressure. In drilling engineering, by observing the change law of drilling rig parameters, not only can the position of the special rock mass interlayer be predicted, but also the stratum structure and strength can be identified, and the prediction formula is also given. Based on the established drilling specific energy formula, the energy analysis method is used to predict the formation structure and compressive strength, and the corresponding prediction formula is given. The research results show that, compared with the single drilling parameter prediction method, the rock-soil structure and strength identification method based on energy theory has higher prediction accuracy and can meet engineering needs.