Search

To study the jet penetration capability of shaped charge warhead of guided ammunition, a variable cone angle-shaped charge liner was designed. LS-DYNA software is used to simulate the penetration capability of shaped charge warhead with three different metal materials (copper, steel, and aluminum). Numerical simulation results show that the velocity of the shaped charge jet formed by the three kinds of materials is valuminum>vcopper>vsteel, and the residual velocity after penetration is Vsteel>Valuminum>Vcopper, the time when the jet starts to break is tcopper > tsteel > taluminum, and the penetration completion time is Tcopper

To study the influence of different initiation modes on the forming characteristics of the MEFP warhead, numerical simulations were carried out on three types of initiation modes. The numerical simulation results showed that the number of EFPs was the least by double-column multipoint synchronous initiation, the number of EFPs was the largest by the central single-point (multipoint) initiation, and single-column single-point (multipoint synchronous) detonation forms the number of EFPs between central single-point (multipoint synchronous) detonation and double-column multipoint synchronous detonation. For the MEFP warhead of a small-caliber grenade, whether it is center detonation or eccentric detonation, the EFP velocity of multipoint detonation is higher than that of the single-point detonation, the velocity of double-column multipoint eccentric synchronous detonation is 2%–9% higher than that of the single-column single-point (multipoint eccentric synchronous) detonation, the velocity of double-column multipoint eccentric synchronous detonation is 10%–17% higher than that of the central single-point (multipoint synchronous) detonation, and the velocity of single-column single-point (multipoint eccentric synchronous) detonation is 5%–17% higher than that of the central single-point (multipoint synchronous) detonation. Research results show that although the number of EFPs is reduced during eccentric single-point (multipoint simultaneous) detonation of MEFP warheads, a higher velocity can be obtained.

To study the influence of different liner structures and materials (copper, steel, and tungsten) on the forming characteristics of multiple explosively formed projectile (MEFP) with integrated liner and shell designs, three types of liners with different structures were designed. LS-DYNA was used for numerical simulation, and the results show that the thickness change at the center of the liner has no obvious influence on the shape of the explosively formed projectile (EFP). However, the curvature radius of the liner has a significant influence on the shape of the EFP. When the liner material is copper and the curvature radius of the liner is greater than 8 mm, the EFP shape approximates an ellipsoidal or hemispherical shape and the EFP forming speed is between 1900 m/s and 2400 m/s. When the material of the liner is steel or tungsten and the curvature radius of the liner is thicker than 8 mm, the liner is not able to form projectiles in the shape of a sphere, ellipsoid, or long rod. By comparing the forming speed from 1#EFP to 4#EFP, it can be said that MEFP with integrated liner and shell design displays a certain pressurization effect. Research results show that, for small-caliber MEFP warheads, subject to the size of the warhead, when the liner is steel or tungsten, the detonation energy generated by the limited charge does not result in the liner forming an effective EFP. However, when the liner material is selected as copper, the EFP forming shape and speed are more appropriate.