Search

In this work, we demonstrate the fabrication of disposable and field deployable nanostructured conductive substrates for dual detection by Surface Enhanced Raman Scattering (SERS) and electrochemistry. Using a one-step potentiostatic process, gold nanostructures were electrodeposited on three substrates: bare indium tin oxide (ITO) electrode, ITO coated with plane gold and carbon fibre (CF) covered with ZnO nanowires (ZnO NWs). Their sensitivities were enhanced by incorporating the plane gold layer and ZnO NWs. The intensity of SERS signals produced on the nanostructured ITO substrates with 0.1 μM quinolinethiol were of the order: nanostructured gold-coated ITO > nanostructured bare ITO. The higher SERS signal on the nanostructured gold-coated ITO was attributed to the coupling between the surface plasmon polariton provided by the gold under layer and the surface plasmon resonance of the Au nanostructures. The ZnO NWs on the carbon fibre provided additional surface area for electrodeposition of gold nanostructures at high density. This led to multiple hotspots formation yielding high SERS signal intensity relative to that on a nanostructured bare carbon fibre. The nanostructured substrates, demonstrated good SERS signal reproducibility with relative standard deviation of 5.19%, 3.28% and 4.53% for Au/ITO, Au/Au-ITO and Au/ZnO-CF respectively. To demonstrate the potential application of these substrates and estimate their sensitivities, they were used to detect melamine by SERS at 1 pM (for Au nanostructures on bare ITO), 1 fM (for Au nanostructured gold-coated ITO), and 0.1 nM (for Au nanostructures on ZnO NWs-coated CF) concentrations with LOD of 0.118 pM, 0.189 fM and 57.4 pM respectively. Taking advantage of the conductive properties of gold nanostructured ITOs, electrochemical detection of 0.1 μM melamine (with an LOD of 0.05 μM) was also demonstrated. Hence, these substrates are potentially useful for SERS and electrochemical-based detection of organic toxicants.

In this work, we propose a new sensitive, selective and portable surface enhanced Raman spectroscopy (SERS) methodology for the rapid on site detection of Pb(II) pollution in water. The new method utilises aminobenzo-18-crown-6 (AB18C6) as a selective recognition molecule to form a spontaneous complex with Pb(II) ions. The formed AB18C6-Pb(II) complex was rapidly immobilised onto a nanostructured gold substrate via Au-N bond formation and reproducibly screened by SERS using a handheld Raman device. For the SERS measurements, a substrate was fabricated by electrochemical deposition of gold nanostructures onto a flat gold disc, creating multiple hotspots for ultrasensitive SERS measurements. The limit of quantification (LOQ) for Pb(II) ions by the SERS method was 2.20 pM. The limit of detection (LOD) was 0.69 pM which is five orders of magnitude lower than the maximum Pb(II) level of 72 nM allowed by the US Environmental Protection Agency. The high sensitivity of the SERS substrate is attributed to the coupling between the Surface Plasmon Polariton (SPP) of its gold surface, the localised Surface Plasmon Resonance (SPR) of the gold nanostructures and the Raman radiation from the immobilised AB18C6-Pb(II) complex. The new SERS detection method was successfully applied for the selective and rapid screening of Pb(II) ion contamination in water proving its practical application for environmental analysis.

2,4,6-trinitrotoluene (TNT) is one of the most commonly used nitro aromatic explosives in landmine, military and mining industry. This article demonstrates rapid and selective identification of TNT by surface-enhanced Raman spectroscopy (SERS) using 6-aminohexanethiol (AHT) as a new recognition molecule. First, Meisenheimer complex formation between AHT and TNT is confirmed by the development of pink colour and appearance of new band around 500 nm in UV-visible spectrum. Solution Raman spectroscopy study also supported the AHT:TNT complex formation by demonstrating changes in the vibrational stretching of AHT molecule between 2800-3000 cm−1. For surface enhanced Raman spectroscopy analysis, a self-assembled monolayer (SAM) of AHT is formed over the gold nanostructure (AuNS) SERS substrate in order to selectively capture TNT onto the surface. Electrochemical desorption and X-ray photoelectron studies are performed over AHT SAM modified surface to examine the presence of free amine groups with appropriate orientation for complex formation. Further, AHT and butanethiol (BT) mixed monolayer system is explored to improve the AHT:TNT complex formation efficiency. Using a 9:1 AHT:BT mixed monolayer, a very low detection limit (LOD) of 100 fM TNT was realized. The new method delivers high selectivity towards TNT over 2,4 DNT and picric acid. Finally, real sample analysis is demonstrated by the extraction and SERS detection of 302 pM of TNT from spiked.

Tumor necrosis factor alpha (TNF-α) is a cytokine that plays a critical role in medical conditions such cardiovascular diseases, rheumatoid arthritis, inflammatory bowel disease, Alzheimer’s and cancer. Herein, we present a new method for the determination of TNF-α by surface enhanced Raman spectroscopy (SERS). A new benzothiazole azo dye (BAN) was used as a Raman probe to detect the cytokine after its selective extraction from blood plasma using a target-specific antibody-functionalised extractor chip. The disulfide bond structure of the extracted TNF-α was reduced to generate free sulfhydryl (SH), terminal groups that adsorb preferentially onto a BAN-functionalised SERS substrate and displace the BAN Raman reporter on the substrate surface. This causes the SERS spectrum of BAN to quench proportionally with the cytokine concentration. Using this SERS quenching sensor, TNF-α was quantified down to 1 × 10−14 M (173 pg/L). The quantification of the cytokine by the SERS quenching method was cross-validated against enzyme-linked immunosorbent assay (ELISA) and the percent agreement between the two measurements was found to be 93.39 %. Since many proteins and peptides have disulfide bonds in their molecular structures, the new SERS quenching method can be extended for their ultrasensitive quantification after selective extraction from biological fluids.