Search

A low-power long-term ambulatory ECG monitor was developed for the acquisition, storage and processing of three simultaneous leads DI, aVF and V2 with a beat-to-beat heart rate measurement in real time. It provides long-term continuous ECG recordings until 84 h. The monitor uses a QRS complex detection algorithm based on the continuous wavelet transform with splines, which automatically selects the scale for the analysis of ECG records with different sampling frequencies. It includes a lead-off detection to continuously monitor the electrode connections and a real-time system of visual and acoustic alarms to alert users of abnormal conditions in its operation. The monitor presented is based in an ADS1294 analogue front end with four channels, 24-bit analog-to-digital converters and programmable gain amplifiers, a low-power dual-core ESP32 microcontroller, a microSD memory for data storage in a range of 4 GB to 32 GB and a 1.4 in thin-film transistor liquid crystal display (LCD) variant with a resolution of 128 × 128 pixels. It has programmable sampling rates of 250, 500 and 1000 Hz; a bandwidth of 0 Hz to 50% of the selected sampling rate; a CMRR of −105 dB; an input margin of ±2.4 V; a resolution of 286 nV; and a current consumption of 50 mA for an average battery life of 84 h. The ambulatory ECG monitor was evaluated with the commercial data-acquisition system BIOPAC MP36 and its module for ECG LABEL SS2LB, simultaneously comparing the morphologies of two ECG records and obtaining a correlation of 91.78%. For the QRS detection in real time, the implemented algorithm had an error less than 5%. The developed ambulatory ECG monitor can be used for the analysis of the dynamics of the heart rate variability in long-term ECG records and for the development of one's own databases of ECG recordings of normal subjects and patients with cardiovascular and noncardiovascular diseases. [ABSTRACT FROM AUTHOR]

LoRa technology has gained popularity as one of the most widely used standards for device interconnection due to its ability to cover long distances and energy efficiency, making it a suitable choice for various Internet of Things (IoT) monitoring and control applications. In this sense, this work presents the development of a visual support tool for creating IoT devices with LoRa and LoRaWAN connectivity. This work significantly advances the state of the art in LoRa technology by introducing a novel visual support tool tailored for creating IoT devices with LoRa and LoRaWAN connectivity. By simplifying the development process and offering compatibility with multiple hardware solutions, this research not only facilitates the integration of LoRaWAN technology within educational settings but also paves the way for rapid prototyping of IoT nodes. The incorporation of block programming for LoRa and LoRaWAN using the Arduinoblocks framework as a graphical environment enhances the capabilities of the tool, positioning it as a comprehensive solution for efficient firmware generation. In addition to the visual tool for firmware generation, multiple compatible hardware solutions enable easy, economical, and stable development, offering a comprehensive hardware and software solution. The hardware proposal is based on an ESP32 microcontroller, known for its power and low cost, in conjunction with an RFM9x module that is based on SX127x LoRa transceivers. Finally, three successfully tested use cases and a discussion are presented. [ABSTRACT FROM AUTHOR]

Developing a low-cost wireless energy meter with power quality measurements for smart grid applications represents a significant advance in efficient and accurate electric energy monitoring. In increasingly complex and interconnected electric systems, this device will be essential for a wide range of applications, such as smart grids, by introducing a real-time energy monitoring system. In light of this, smart meters can offer greater opportunities for sustainable and efficient energy use and improve the utilization of energy sources, especially those that are nonrenewable. According to the 2020 International Energy Agency (IEA) report, nonrenewable energy sources represent 65% of the global supply chain. The smart meter developed in this work is based on the ESP32 microcontroller and easily accessible components since it includes a user-friendly development platform that offers a cost-effective solution while ensuring reliable performance. The main objective of developing the smart meters was to enhance the software and simplify the hardware. Unlike traditional meters that calculate electrical parameters by means of complex circuits in hardware, this project performed the calculations directly on the microcontroller. This procedure reduced the complexity of the hardware by simplifying the meter design. Owing to the high-performance processing capability of the microcontroller, efficient and accurate calculations of electrical parameters could be achieved without the need for additional circuits. This software-driven approach with simplified hardware led to benefits, such as reduced production costs, lower energy consumption, and a meter with improved accuracy, as well as updates on flexibility. Furthermore, the integrated wireless connectivity in the microcontroller enables the collected data to be transmitted to remote monitoring systems for later analysis. The innovative feature of this smart meter lies in the fact that it has readily available components, along with the ESP32 chip, which results in a low-cost smart meter with performance that is comparable to other meters available on the market. Moreover, it is has the capacity to incorporate IoT and artificial intelligence applications. The developed smart meter is cost effective and energy efficient, and offers benefits with regard to flexibility, and thus represents an innovative, efficient, and versatile solution for smart grid applications. [ABSTRACT FROM AUTHOR]

The Internet of Things (IoT) has become a transformative technology with great potential in various sectors, including home automation, industrial control, environmental monitoring, agriculture, wearables, health monitoring, and others. The growing presence of IoT devices stimulates schools and academic institutions to integrate IoT into the educational process, since IoT skills are in demand in the labor market. This paper presents educational IoT tools and technologies that simplify the design, implementation, and testing of IoT applications. The article presents the introductory IoT course that students perform initially and then presents some of the projects that they develop and implement on their own later in the project. [ABSTRACT FROM AUTHOR]

The Internet of Things (IoT) envisions billions of everyday objects sharing information. As new devices, applications and communication protocols are proposed for the IoT context, their evaluation, comparison, tuning and optimization become crucial and raise the need for a proper benchmark. While edge computing aims to provide network efficiency by distributed computing, this article moves towards sensor nodes in order to explore efficiency in the local processing performed by IoT devices. We present IoTST, a benchmark based on per-processor synchronized stack traces with the isolation and precise determination of the introduced overhead. It produces comparable detailed results and assists in determining the configuration that has the best processing operating point so that energy efficiency can also be considered. On benchmarking applications which involve network communication, the results can be influenced by the constant changes that occur in the state of the network. In order to circumvent such problems, different considerations or assumptions were used in the generalization experiments and the comparison to similar studies. To present IoTST usage on a real problem, we implemented it on a commercial off the-shelf (COTS) device and benchmarked a communication protocol, producing comparable results that are unaffected by the current network state. We evaluated different Transport-Layer Security (TLS) 1.3 handshake cipher suites at different frequencies and with various numbers of cores. Among other results, we could determine that the selection of a specific suite (Curve25519 and RSA) can improve the computation latency by up to four times over the worst suite candidate (P-256 and ECDSA), while both providing the same security level (128 bits). [ABSTRACT FROM AUTHOR]

With the climate change we are experiencing today, the number and intensity of heatwaves are increasing dramatically, significantly impacting our buildings' overheating. The majority of the prefabricated concrete panel buildings in Hungary are considered outdated from an energy point of view. These buildings may be at greater risk from extreme weather events. To examine this, long-term monitoring measurements are needed. Therefore, we developed a unique, reliable, and cost-effective wireless monitoring system, which can track in real time the indoor air quality data (temperature, relative humidity, CO2) of the investigated apartment building, as well as users' habits, such as resident presence, window opening, and blind movement. The data were used to analyse and quantify the summer overheating of the dwelling and user habits. The measurements showed that the average temperature in all rooms was above 26 °C, and there were several occasions when the temperature exceeded 30 °C. Overheating in apartment buildings in summer is a significant problem that needs to be addressed. Further investigation of ventilation habits will help develop favourable ventilation strategies, and using these measurements in dynamic simulations will also help improve the models' validity for further studies. [ABSTRACT FROM AUTHOR]

Achieving a normal gait trajectory for an amputee's active prosthesis is challenging due to its kinematic complexity. Accordingly, lower limb gait trajectory kinematics and gait phase segmentation are essential parameters in controlling an active prosthesis. Recently, the most practiced algorithm in gait trajectory generation is the neural network. Deploying such a complex Artificial Neural Network (ANN) algorithm on an embedded system requires performing the calculations on an external computational device; however, this approach lacks mobility and reliability. In this paper, more simple and reliable ANNs are investigated to be deployed on a single low-cost Microcontroller (MC) and hence provide system mobility. Two neural network configurations were studied: Multi-Layered Perceptron (MLP) and Convolutional Neural Network (CNN); the models were trained on shank and foot IMU data. The data were collected from four subjects and tested on a fifth to predict the trajectory of 200 ms ahead. The prediction was made for two cases: with and without providing the current phase of the gait. Then, the models were deployed on a low-cost microcontroller (ESP32). It was found that with fewer data (excluding the current gait phase), CNN achieved a better correlation coefficient of 0.973 when compared to 0.945 for MLP; when including the current phase, both network configurations achieved better correlation coefficients of nearly 0.98. However, when comparing the execution time required for the prediction on the intended MC, MLP was much faster than CNN, with an execution time of 2.4 ms and 142 ms, respectively. In summary, it was found that when training data are scarce, CNN is more efficient within the acceptable execution time, while MLP achieves relative accuracy with low execution time with enough data. [ABSTRACT FROM AUTHOR]

Ambient Intelligence is a vision of daily life in which intelligent devices interact with humans to make their lives easier, and the technology is invisible. Artificial Intelligence (AI) governs this smart environment and must interact with humans to best meet their needs and demands. Although voice assistants are very popular and efficient as conversational AI, under some conditions they cannot be used. Therefore, this work proposed a complementary tactile and tangible interface to converse with AI, creating new Tactile Signs. A prototype of TactCube, a wireless cube-shaped device that can interact with AI using only the tactile sense, is presented. The hypothesis is that TactCube can be manipulated with one hand and generate a sequence of numbers that can be interpreted as a new tactile language by a neural network solution. The paper describes the initial research made to define how these sequences can be generated and demonstrates how TactCube is able to do it. [ABSTRACT FROM AUTHOR]

Deploying wireless sensor networks (WSN) in rural environments such as agricultural fields may present some challenges that affect the communication between the nodes due to the vegetation. These challenges must be addressed when implementing precision agriculture (PA) systems that monitor the fields and estimate irrigation requirements with the gathered data. In this paper, different WSN deployment configurations for a soil monitoring PA system are studied to identify the effects of the rural environment on the signal and to identify the key aspects to consider when designing a PA wireless network. The PA system is described, providing the architecture, the node design, and the algorithm that determines the irrigation requirements. The testbed includes different types of vegetation and on-ground, near-ground, and above-ground ESP32 Wi-Fi node placements. The results of the testbed show high variability in densely vegetated areas. These results are analyzed to determine the theoretical maximum coverage for acceptable signal quality for each of the studied configurations. The best coverage was obtained for the near-ground deployment. Lastly, the aspects of the rural environment and the deployment that affect the signal such as node height, crop type, foliage density, or the form of irrigation are discussed. [ABSTRACT FROM AUTHOR]

This paper introduces a new way of managing water in irrigation systems, which can be applied to gardens or agricultural fields, replacing human intervention with Wireless Sensor Networks. A typical irrigation system wastes on average 30% of the water used, due to poor management and configuration. This sustainable irrigation system allows a better efficiency in the process of irrigation that can lead to savings for the end user, not only monetary but also in natural resources, such as water and energy, leading to a more sustainable environment. The system can retrieve real time data and use them to determinate the correct amount of water to be used in a garden. With this solution, it is possible to save up to 34% of water when using sensor data from temperature, humidity and soil moisture, or up to 26% when using only temperature inputs. Besides a detailed system architecture, this paper includes a real case scenario implementation and results discussion. [ABSTRACT FROM AUTHOR]