Search

In this letter, a dual-polarized metal Vivaldi phased array antenna composed of independent structural elements is proposed, covering 6–18 GHz. By designing Vivaldi elements with a flexible and complementary structure, arrays of arbitrary shapes and scales can be constructed. The resonance caused by structural discontinuity is critically studied and eliminated to ensure good performance across the entire band. The antenna elements are fed by 50-Ohm SSMP connectors and manufactured from 2A12 aluminum alloy. An array prototype consisting of 8 × 8 dual-polarized metal has been fabricated and tested with active transmit/receive (T/R) modules to demonstrate the design concept. The array exhibits excellent beam-scanning characteristics in both the E-plane and H-plane, within the scanning range without grating lobes, which shows good agreement with the simulated results. The measured gain results are within the range of 15.2 to 24.8 dBi, and the aperture efficiencies are greater than 91% in the entire operating band. The wideband antenna technology involved in this study can effectively help increase the capacity of communication systems and meets the intentions of the Special Issue. [ABSTRACT FROM AUTHOR]

A low-profile broadband dual-polarized antenna is investigated for base station applications. It consists of two orthogonal dipoles, fork-shaped feeding lines, an artificial magnetic conductor (AMC), and parasitic strips. By utilizing the Brillouin dispersion diagram, the AMC is designed as the antenna reflector. It has a wide in-phase reflection bandwidth of 54.7% (1.54–2.70 GHz) and a surface-wave bound range of 0–2.65 GHz. This design effectively reduces the antenna profile by over 50% compared to traditional antennas without an AMC. For demonstration, a prototype is fabricated for 2G/3G/LTE base station applications. Good agreement between the simulations and measurements is observed. The measured −10-dB impedance bandwidth of our antenna is 55.4% (1.58–2.79 GHz), with a stable gain of 9.5 dBi and a high isolation of more than 30 dB across the impedance passband. As a result, this antenna is an excellent candidate for miniaturized base station antenna applications. [ABSTRACT FROM AUTHOR]

A fixed-frequency beam-scanning leaky-wave antenna (LWA) array with three switchable dual-polarized beams is proposed and experimentally demonstrated. The proposed LWA array consists of three groups of spoof surface plasmon polaritons (SPPs) LWAs with different modulation period lengths and a control circuit. Each group of SPPs LWAs can independently control the beam steering at a fixed frequency by loading varactor diodes. The proposed antenna can be configured in both multi-beam mode and single-beam mode, where the multi-beam mode with optional two or three dual-polarized beams. The beam width can be flexibly adjusted from narrow to wide by switching between multi-beam and single-beam states. The prototype of the proposed LWA array is fabricated and measured, and both simulation and experimental results show that the antenna can accomplish a fixed frequency beam scanning at an operating frequency of 3.3 to 3.8 GHz with a maximum scanning range of about 35° in multi-beam mode and about 55° in single-beam mode. It could be a promising candidate for application in the space–air–ground integrated network scenario in satellite communication and future 6G communication systems. [ABSTRACT FROM AUTHOR]

Herein, we present new design principles for gain enhancement and cross-polarization suppression in dual-polarized cavity-backed antennas and demonstrate the capability in an octagonal cavity-backed open prism antenna (OCROP). In our approach, the gain is enhanced through an optimal flaring procedure and a novel metallic iris is used to control the electromagnetic fields and thereby reduce the cross-polarization. Previously, we investigated a dual-polarized OCROP antenna configuration and were able to simultaneously achieve 50% impedance bandwidth, 40% cross-polarization bandwidth (≤25 dB), and 10.2 dBi peak gain. In this study, we investigated gain enhancement by flaring an upper section of the ground cavity sidewalls, while maintaining a constant cavity height. Two cases were investigated: (1) the flare angle was modified, while the ratio of the non-flared to flared sidewall heights was kept constant, and (2) the ratio of the non-flared to flared sidewall heights was varied. In case 1, we established that, while increasing the flare angle results in a gain increase, there is a limit, as cross-polarization at the upper operating frequencies increases. In case 2, we were able to reduce the aperture phase error and achieve a higher peak gain of 12.8 dBi. To address the increased cross-polarization at the high frequency end when a large flare was used, we added a metallic iris at the junction of non-flared and flared sidewalls. We showed that increasing the iris width generally decreases the cross-polarization at high frequencies, without compromising the gain and impedance bandwidth. At an optimal width, it provides a nearly constant, low cross-polarization (below −25.8 dB) and a peak gain of 13.3 dBi, across the entire 50.7% impedance bandwidth of the antenna. We fabricated and successfully tested a prototype to verify the design and simulation approach. These results prove that incorporating an aperture flare with a metallic iris can significantly improve the gain and cross-polarization performance of cavity-backed antennas. [ABSTRACT FROM AUTHOR]

A non-resonant metasurface (NRMS) concept is reported in this paper to improve the isolation of dual-polarized and wideband large-scale antenna arrays. By properly designing the NRMS, it can perform stable negative permeability and positive permittivity along the tangential direction of the NRMS within a wide band, which can be fully employed to suppress the mutual couplings of large-scale antenna arrays. At the same time, the proposed NRMS can also result in positive permittivity and permeability along the normal direction of the NRMS, which guarantees the free propagation of electromagnetic waves from antenna arrays along the normal direction. For demonstration, a 4×4 dual-polarized antenna array loading with the proposed NRMS is designed to improve the isolations of the antenna array. The simulations demonstrate that the isolations among all ports are over 24 dB from 4.36 to 4.94 GHz, which are experimentally verified by the measured results. Moreover, the radiation patterns of antenna elements are still maintained after leveraging the proposed NRMS. Due to the simple structure of the proposed NRMS, it is very promising to be widely employed for massive MIMO antenna arrays. [ABSTRACT FROM AUTHOR]

A broadband dual-polarized base station antenna with special designed feeding structures is investigated in this paper. The proposed antenna contains two pairs of crossed dipoles, two specially designed feeding connectors, two pieces of dielectric pads, a supporter (also a balun), and a reflector. To verify the designed antenna, a prototype is fabricated and measured. The antenna attains a bandwidth of around 46.5% operating over 3.14–5.04 GHz under reflection coefficient lower than –15 dB, and the port-to-port isolation is higher than 32.5 dB. It also achieves very stable radiation patterns with half power beam widths of 71.8° ± 2.5° in both the horizontal and vertical planes and gains of around 8 dBi over its operating band. Besides, the mechanism of the obtained good performances is clearly explained from the angle of current. All of the features ensure that the proposed antenna is suitable for the fifth-generation (5G) mobile communications. [ABSTRACT FROM AUTHOR]

This paper presents a novel compact dual-band and dual-polarized complementary split-ring resonator (CSRR)-fed substrate-integrated waveguide (SIW) cavity-backed fractal patch antenna for wireless energy harvesting and communication. The proposed antenna is composed of a Giuseppe Peano fractal radiation patch with a backed SIW cavity. To enhance the bandwidth and minimize the dimensions, the CSRR structure is designed to feed the Giuseppe Peano fractal patch orthogonally. A prototype of the proposed antenna is simulated, fabricated and measured. The proposed antenna exhibits good directionality and high cross-polarization level with especially compact size. [ABSTRACT FROM AUTHOR]

A broadband differential-fed dual-polarized hollow cylindrical dielectric resonator antenna (DRA) is proposed in this article. It makes use of the HEM111, HEM113, and HEM115 modes of the cylindrical hollow DRA. The proposed DRA is simply fed by two pairs of conducting strips and each pair of strips is provided with the out-of-phase signals. After introducing four disconnected air holes into the DRA, a broadband characteristic is achieved, with little effect on the antenna gain of its higher-order modes. To verify this idea, frosted K9-glass is applied to fabricate the hollow cylindrical DRA. The differential S-parameters, radiation patterns, and antenna gain of the DRA are studied. It is found that the proposed differential-fed dual-polarized DRA is able to provide a broad differential impedance bandwidth of ~68% and a high differential-port isolation better than ~46 dB. Moreover, symmetrical broadside radiation patterns are observed across the whole operating band. The proposed DRA covers the frequency bands including the 5G-n77 (3.4–4.2 GHz), 5G-n79 (4.4–5.0 GHz), WLAN-5.2 GHz (5.15–5.35 GHz), and WLAN-5.8 GHz (5.725–5.825 GHz), which can be used for 5G communications. [ABSTRACT FROM AUTHOR]