Search

We proposed a new method for gas detection in photoacoustic spectroscopy based on acousto-optic Q-switched fiber laser by merging a transmission PAS cell (resonant frequency f 0 = 5.3 kHz) inside the fiber laser cavity. The Q-switching was achieved by an acousto-optic modulator, achieving a peak pulse power of ~679 mW in the case of the acousto-optic modulation signal with an optimized duty ratio of 10%. We used a custom-made fiber Bragg grating with a central wavelength of 1530.37 nm (the absorption peak of C2H2) to select the laser wavelength. The system achieved a linear response (R2 = 0.9941) in a concentration range from 400 to 7000 ppmv, and the minimum detection limit compared to that of a conventional intensity modulation system was enhanced by 94.2 times. [ABSTRACT FROM AUTHOR]

A technique for elimination of residual amplitude modulation (ERAM) in photoacoustic spectroscopy based on dual path lock-in was proposed and experimentally demonstrated. There are two lock-in amplifiers, one is for gas concentration demodulation and another for residual amplitude modulation (RAM) measurement by tuning the reference signal in different phases, and then a dual path lock-in technique based on subtraction is applied to RAM removal, improving the second harmonic profile significantly. In this system, the signal to noise ratio (SNR) increases about two times based on our dual path lock-in technique compared to one distributed feedback laser diode (DFB-LD). The system achieved a good linear response (R-square = 0.99887) in a concentration range from 100 ppmv to 2400 ppmv and a minimum detection limit (MDL) of 1.47 ppmv. [ABSTRACT FROM AUTHOR]