Search

With the deployment of the fifth generation (5G) mobile network systems and the envisioned heterogeneous ultra-dense networks (UDNs), both small cell (SmC) and distributed antenna system (DAS) technologies are required by mobile network operators (MNOs) and venue owners to support multiple spectrum bands, multiple radio access technologies (RATs), multiple optical central offices (COs), and multiple MNOs. As a result, the neutral host business model representing a third party responsible for managing the network enterprise on behalf of multiple MNOs has emerged as a potential solution, mainly influenced by the desire to provide a high user experience without significantly increasing the total cost of ownership (TCO). However, designing a sustainable business model for a neutral host is a nontrivial task, especially when considered in the context of 5G and beyond (5GB) UDNs. In this paper, under an integrated optical wireless network infrastructure, we review how SmC and DAS technologies are evolving towards the adoption of the neutral host business model and identify key challenges and requirements for 5GB support. Thus, we explore recent candidate advancements in heterogeneous network integration technologies for the realization of an efficient 5GB neutral host business model design capable of accommodating both SmC and DAS. Furthermore, we propose a novel design architecture that relies on virtual radio access network (vRAN) to enable real-time dynamic resource allocation and radio over Ethernet (RoE) for flexible and reconfigurable fronthaul. The results from our simulations using MATLAB over two real-life deployment scenarios validate the feasibility of utilizing switched RoE considering end-to-end delay requirements of 5GB under different switching schemes, as long as the queuing delay is kept to a minimum. Finally, the results show that incorporating RoE and vRAN technologies into the neutral host design results in substantial TCO reduction by about 81% in an indoor scenario and 73% in an outdoor scenario. [ABSTRACT FROM AUTHOR]

The use of autonomous underwater vehicles (AUVs) has expanded in recent years to include inspection, maintenance, and repair missions. For these tasks, the vehicle must maintain its position while inspections or manipulations are performed. Some station-keeping controllers for AUVs can be found in the literature that exhibits robust performance against external disturbances. However, they are either model-based or require an observer to deal with the disturbances. Moreover, most of them have been evaluated only by numerical simulations. In this paper, the feasibility of a model-free high-order sliding mode controller for the station-keeping problem is validated. The proposed controller was evaluated through numerical simulations and experiments in a semi-Olympic swimming pool, introducing external disturbances that remained unknown to the controller. Results have shown robust performance in terms of the root mean square error (RMSE) of the vehicle position. The simulation resulted in the outstanding station-keeping of the BlueROV2 vehicle, as the tracking errors were kept to zero throughout the simulation, even in the presence of strong ocean currents. The experimental results demonstrated the robustness of the controller, which was able to maintain the RMSE in the range of 1–4 cm for the depth of the vehicle, outperforming related work, even when the disturbance was large enough to produce thruster saturation. [ABSTRACT FROM AUTHOR]

In order to achieve the complicated trajectory tracking of quadrotor, a geometric inner and outer loop control scheme is presented. The outer loop generates the desired rotation matrix for the inner loop. To improve the response speed and robustness, a geometric SMC controller is designed for the inner loop. The outer loop is also designed via sliding mode control (SMC). By Lyapunov theory and cascade theory, the closed-loop system stability is guaranteed. Next, the tracking performance is validated by tracking three representative trajectories. Then, the robustness of the proposed control method is illustrated by trajectory tracking in presence of model uncertainty and disturbances. Subsequently, experiments are carried out to verify the method. In the experiment, ultra wideband (UWB) is used for indoor positioning. Extended Kalman Filter (EKF) is used for fusing inertial measurement unit (IMU) and UWB measurements. The experimental results show the feasibility of the designed controller in practice. The comparative experiments with PD and PD loop demonstrate the robustness of the proposed control method. [ABSTRACT FROM AUTHOR]

Several control strategies have been proposed for the trajectory tracking problem of Autonomous Underwater Vehicles (AUV). Most of them are model-based, hence, detailed knowledge of the parameters of the robot is needed. Few works consider a finite-time convergence in their controllers, which offers strong robustness and fast convergence compared with asymptotic or exponential solutions. Those finite-time controllers do not permit the users to predefine the convergence time, which can be useful for a more efficient use of the robot's energy. This paper presents the experimental validation of a model-free high-order Sliding Mode Controller (SMC) with finite-time convergence in a predefined time. The convergence time is introduced by the simple change of a time-base parameter. The aim is to validate the controller so it can be implemented for cooperative missions where the communication is limited or null. Results showed that the proposed controller can drive the robot to the desired depth and heading trajectories in the predefined time for all the cases, reducing the error by up to 75% and 41% when compared with a PID and the same SMC with asymptotic convergence. The energy consumption was reduced 35% and 50% when compared with those same controllers. [ABSTRACT FROM AUTHOR]

This paper studies three-dimensional (3D) straight line path following and obstacle avoidance control for an underactuated autonomous underwater vehicle (AUV) without lateral and vertical driving forces. Firstly, the expected angular velocities are designed by using two different methods in the kinematic controller. The first one is a traditional method based on Line-of-sight (LOS) guidance law, and the second one is an improved method based on model predictive control (MPC). At the same time, a penalty item is designed by using the obstacle information detected by onboard sensors, which can realize the real-time obstacle avoidance of the unknown obstacle. Then, in order to overcome the uncertainty of the dynamics model and the saturation of actual control input, the dynamic controller is designed by using sliding mode control (SMC) technology. Finally, in the simulation experiment, the performance of the improved control method is verified by comparison with two traditional control methods based on LOS guidance law. Since the constraint of an AUV's angular velocities are considered in MPC, simulation results show that the improved control method uses MPC, and SMC not only improves the tracking quality of the AUV when switching paths near the waypoints and realizes real-time obstacle avoidance but also effectively reduces the mean square error (MSE) and saturation rate of the rudder angle. Therefore, this control method is more conducive to the system stability and saves energy. [ABSTRACT FROM AUTHOR]