Search

Lying is a high priority behavior for dairy cows. As the quality of cubicles can influence their lying time, the interest in finding objective methods to assess the quality of floors has increased substantially over recent decades. This study aimed to evaluate a technical device for measuring elastic properties of floors for the application to bedding materials for cows. Ten different floor types were used: horse manure, recycled manure solids, bark mulch, sand, sawdust, and three different rubber mats. Horse manure and bark mulch were additionally tested with chopped straw as a top layer. Two devices of the same kind and two examiners were available for performing comparative measurements. Regression analyses and an ANOVA were conducted to compare the devices, examiners, and different surfaces. Most of the floors differed significantly from each other. Sawdust was the softest material, followed by sand and recycled manure solids. The agreement between the devices (Lin's concordance correlation coefficient (CCC) > 0.99, Spearman's rank correlation coefficient (rS) = 0.99) and examiners (CCC = 0.99, rS = 0.99) was almost perfect. These findings indicate that this device can be used as a new method for assessing the softness of bedding materials for dairy cows objectively. [ABSTRACT FROM AUTHOR]

A mandibular advancement device (MAD) is a commonly used treatment modality for patients with mild-to-moderate obstructive sleep apnea. Although MADs have excellent therapeutic efficacy, dental side effects were observed with long-term use of MADs. The aim of this study was to analyze the force distribution on the entire dentition according to the materials and design of the MADs. Three types of MADs were applied: model 1 (single layer of polyethylene terephthalate glycol (PETG)), model 2 (double layer of PETG + thermoplastic polyurethane (TPU)), and model 3 (core-reinforced multilayer). In the maxilla, regardless of the model, the incisors showed the lowest force distribution. In most tooth positions, the force distribution was lower in models 2 and 3 than in model 1. In the mandible, the mandibular second molar showed a significantly lower force in all models. The mandibular incisors, canines, and molars showed the highest force values in model 1 and the lowest values in model 3. Depending on the material and design of the device, the biomechanical effect on the dentition varies, and the core-reinforced multilayered MAD can reduce the force delivered to the dentition more effectively than the conventional single- or double-layer devices. [ABSTRACT FROM AUTHOR]

The interest and competitiveness in sports for persons with disabilities has increased significantly in the recent years, creating a demand for technological tools supporting practice. Wearable sensors offer non-invasive, portable and overall convenient ways to monitor sports practice. This systematic review aims at providing current evidence on the application of wearable sensors in sports for persons with disability. A search for articles published in English before May 2020 was performed on Scopus, Web-Of-Science, PubMed and EBSCO databases, searching titles, abstracts and keywords with a search string involving terms regarding wearable sensors, sports and disability. After full paper screening, 39 studies were included. Inertial and EMG sensors were the most commonly adopted wearable technologies, while wheelchair sports were the most investigated. Four main target applications of wearable sensors relevant to sports for people with disability were identified and discussed: athlete classification, injury prevention, performance characterization for training optimization and equipment customization. The collected evidence provides an overview on the application of wearable sensors in sports for persons with disability, providing useful indication for researchers, coaches and trainers. Several gaps in the different target applications are highlighted altogether with recommendation on future directions. [ABSTRACT FROM AUTHOR]

In large cohort studies, due to the time-consuming nature of the measurement of movement biomechanics, more than one evaluator needs to be involved. This may increase the potential occurrence of error due to inaccurate positioning of markers to the anatomical locations. The purpose of this study was to determine the reliability and objectivity of lower limb segments length by multiple evaluators in a large cohort study concerning healthy aging in an industrial environment. A total of eight evaluators performed marker placements on five participants on three different days. Evaluators placed markers bilaterally on specific anatomical locations of the pelvis, thigh, shank and foot. On the right foot, markers were placed in anatomical locations to define a multi-segmental foot model. The position of the marker at the anatomical locations was recorded by a motion capture system. The reliability and objectivity of lower limb segment lengths was determined by the intraclass correlation coefficient of a two-way random model and of the two-way mixed model, respectively. For all evaluators for all segments, the average reliability and objectivity was greater than 0.8, except for the metatarsus segment (0.683). Based on these results, we can conclude that multiple evaluators can be engaged in a large cohort study in the placement of anatomical markers. [ABSTRACT FROM AUTHOR]

According to the experience of nurses and physiotherapists, the abdomen of constipated people becomes softer after abdominal massage. However, the relationship between the decrease in abdominal stiffness and the benefits of abdominal massage has not been examined quantitatively and is unclear. Furthermore, devices for measuring stiffness have been designed to measure relatively hard areas such as the shoulders and do not take into account the lateral outflow of the target tissue, which can be a problem when measuring the stiffness of soft areas such as the abdomen. To address these issues, this study presents a stiffness sensor suitable for measuring abdominal stiffness and investigates the relationship between the reduction in abdominal stiffness and the benefits of abdominal massage. The solution to prevent the lateral outflow of the target is the realization of a stopper, including a contact detection device, which enables a wide-area contact around the targeted area. The sensor consists of a stopper, probe, spring, and time-of-flight (ToF) sensors. The probe and spring provide appropriate pressure and deformation to the abdomen, whereas the stopper prevents the probe from being pushed into the abdomen more than necessary. The ToF sensor measures the deformation length when the deformation is stopped by the stopper. The abdominal stiffness can be derived from the deformation length. The investigation results indicate that the reduction in abdominal stiffness corresponds to the improvement of the stool condition or the maintenance of a healthy stool condition, whereas the maintenance of abdominal stiffness indicates the maintenance or deterioration of the stool condition. [ABSTRACT FROM AUTHOR]

A treadmill was used to perform continuous walking tests in a limited space that can be covered by marker-based optical motion capture systems. Most treadmill-based gait data are analyzed based on gait cycle percentage. However, achieving continuous walking motion trajectories over time without time normalization is often required, even if tests are performed under treadmill walking conditions. This study presents a treadmill-to-overground mapping method of optical marker trajectories for treadmill-based continuous gait analysis, by adopting a simple concept of virtual origin. The position vector from the backward moving virtual origin to a targeted marker within a limited walking volume is the same as the position vector from the fixed origin to the forward moving marker over the ground. With the proposed method, it is possible (i) to observe the change in physical quantity visually during the treadmill walking, and (ii) to obtain overground-mapped gait data for evaluating the accuracy of the inertial-measurement-unit-based trajectory estimation. The accuracy of the proposed method was verified from various treadmill walking tests, which showed that the total travel displacement error rate was 0.32% on average. [ABSTRACT FROM AUTHOR]

Movement science investigating muscle and tendon functions during locomotion utilizes commercial ultrasound imagers built for medical applications. These limit biomechanics research due to their form factor, range of view, and spatio-temporal resolution. This review systematically investigates the technical aspects of applying ultrasound as a research tool to investigate human and animal locomotion. It provides an overview on the ultrasound systems used and of their operating parameters. We present measured fascicle velocities and discuss the results with respect to operating frame rates during recording. Furthermore, we derive why muscle and tendon functions should be recorded with a frame rate of at least 150 Hz and a range of view of 250 mm. Moreover, we analyze why and how the development of better ultrasound observation devices at the hierarchical level of muscles and tendons can support biomechanics research. Additionally, we present recent technological advances and their possible application. We provide a list of recommendations for the development of a more advanced ultrasound sensor system class targeting biomechanical applications. Looking to the future, mobile, ultrafast ultrasound hardware technologies create immense opportunities to expand the existing knowledge of human and animal movement. [ABSTRACT FROM AUTHOR]