Search

The ability to sense airborne pollutants with mobile robots provides a valuable asset for domains such as industrial safety and environmental monitoring. Oftentimes, this involves detecting how certain gases are spread out in the environment, commonly referred to as a gas distribution map, to subsequently take actions that depend on the collected information. Since the majority of gas transducers require physical contact with the analyte to sense it, the generation of such a map usually involves slow and laborious data collection from all key locations. In this regard, this paper proposes an efficient exploration algorithm for 2D gas distribution mapping with an autonomous mobile robot. Our proposal combines a Gaussian Markov random field estimator based on gas and wind flow measurements, devised for very sparse sample sizes and indoor environments, with a partially observable Markov decision process to close the robot's control loop. The advantage of this approach is that the gas map is not only continuously updated, but can also be leveraged to choose the next location based on how much information it provides. The exploration consequently adapts to how the gas is distributed during run time, leading to an efficient sampling path and, in turn, a complete gas map with a relatively low number of measurements. Furthermore, it also accounts for wind currents in the environment, which improves the reliability of the final gas map even in the presence of obstacles or when the gas distribution diverges from an ideal gas plume. Finally, we report various simulation experiments to evaluate our proposal against a computer-generated fluid dynamics ground truth, as well as physical experiments in a wind tunnel. [ABSTRACT FROM AUTHOR]

This paper proposes LTC-Mapping, a method for building object-oriented semantic maps that remain consistent in the long-term operation of mobile robots. Among the different challenges that compromise this aim, LTC-Mapping focuses on two of the more relevant ones: preventing duplicate instances of objects (instance duplication) and handling dynamic scenes. The former refers to creating multiple instances of the same physical object in the map, usually as a consequence of partial views or occlusions. The latter deals with the typical assumption made by object-oriented mapping methods that the world is static, resulting in outdated representations when the objects change their positions. To face these issues, we model the detected objects with 3D bounding boxes, and analyze the visibility of their vertices to detect occlusions and partial views. Besides this geometric modeling, the boxes are augmented with semantic information regarding the categories of the objects they represent. Both the geometric entities (bounding boxes) and their semantic content are propagated over time through data association and a fusion technique. In addition, in order to keep the map curated, the non-detection of objects in the areas where they should appear is also considered, proposing a mechanism that removes them from the map once there is evidence that they have been moved (i.e., multiple non-detections occur). To validate our proposal, a number of experiments have been carried out using the Robot@VirtualHome ecosystem, comparing its performance with a state-of-the-art alternative. The results report a superior performance of LTC-Mapping when modeling both geometric and semantic information of objects, and also support its online execution. [ABSTRACT FROM AUTHOR]

This work presents a simulation framework developed under the widely used Robot Operating System (ROS) to enable the validation of robotics systems and gas sensing algorithms under realistic environments. The framework is rooted in the principles of computational fluid dynamics and filament dispersion theory, modeling wind flow and gas dispersion in 3D real-world scenarios (i.e., accounting for walls, furniture, etc.). Moreover, it integrates the simulation of different environmental sensors, such as metal oxide gas sensors, photo ionization detectors, or anemometers. We illustrate the potential and applicability of the proposed tool by presenting a simulation case in a complex and realistic office-like environment where gas leaks of different chemicals occur simultaneously. Furthermore, we accomplish quantitative and qualitative validation by comparing our simulated results against real-world data recorded inside a wind tunnel where methane was released under different wind flow profiles. Based on these results, we conclude that our simulation framework can provide a good approximation to real world measurements when advective airflows are present in the environment. [ABSTRACT FROM AUTHOR]

Metal Oxide Semiconductor (MOX) gas transducers are one of the preferable technologies to build electronic noses because of their high sensitivity and low price. In this paper we present an approach to overcome to a certain extent one of their major disadvantages: their slow recovery time (tens of seconds), which limits their suitability to applications where the sensor is exposed to rapid changes of the gas concentration. Our proposal consists of exploiting a double first-order model of the MOX-based sensor from which a steady-state output is anticipated in real time given measurements of the transient state signal. This approach assumes that the nature of the volatile is known and requires a precalibration of the system time constants for each substance, an issue that is also described in the paper. The applicability of the proposed approach is validated with several experiments in real, uncontrolled scenarios with a mobile robot bearing an e-nose. [ABSTRACT FROM AUTHOR]

One of the major disadvantages of the use of Metal Oxide Semiconductor (MOS) technology as a transducer for electronic gas sensing devices (e-noses) is the long recovery period needed after each gas exposure. This severely restricts its usage in applications where the gas concentrations may change rapidly, as in mobile robotic olfaction, where allowing for sensor recovery forces the robot to move at a very low speed, almost incompatible with any practical robot operation. This paper describes the design of a new e-nose which overcomes, to a great extent, such a limitation. The proposed e-nose, called Multi-Chamber Electronic Nose (MCE-nose), comprises several identical sets of MOS sensors accommodated in separate chambers (four in our current prototype), which alternate between sensing and recovery states, providing, as a whole, a device capable of sensing changes in chemical concentrations faster. The utility and performance of the MCE-nose in mobile robotic olfaction is shown through several experiments involving rapid sensing of gas concentration and mobile robot gas mapping. [ABSTRACT FROM AUTHOR]

The simulation of how a gas disperses in a environment is a necessary asset for the development of olfaction-based autonomous agents. A variety of simulators already exist for this purpose, but none of them allows for a sufficiently convenient integration with other types of sensing (such as vision), which hinders the development of advanced, multi-sensor olfactory robotics applications. In this work, we present a framework for the simulation of gas dispersal and sensing alongside vision by integrating GADEN, a state-of-the-art Gas Dispersion Simulator, with the Unity 3D, a video game development engine that is used in many different areas of research and helps with the creation of visually realistic, complex environments. We discuss the motivation for the development of this tool, describe its characteristics, and present some potential use cases that are based on cutting-edge research in the field of olfactory robotics. [ABSTRACT FROM AUTHOR]

In domestic robotics, passing through narrow areas becomes critical for safe and effective robot navigation. Due to factors like sensor noise or miscalibration, even if the free space is sufficient for the robot to pass through, it may not see enough clearance to navigate, hence limiting its operational space. An approach to facing this is to insert waypoints strategically placed within the problematic areas in the map, which are considered by the robot planner when generating a trajectory and help to successfully traverse them. This is typically carried out by a human operator either by relying on their experience or by trial-and-error. In this paper, we present an automatic procedure to perform this task that: (i) detects problematic areas in the map and (ii) generates a set of auxiliary navigation waypoints from which more suitable trajectories can be generated by the robot planner. Our proposal, fully compatible with the robotic operating system (ROS), has been successfully applied to robots deployed in different houses within the H2020 MoveCare project. Moreover, we have performed extensive simulations with four state-of-the-art robots operating within real maps. The results reveal significant improvements in the number of successful navigations for the evaluated scenarios, demonstrating its efficacy in realistic situations. [ABSTRACT FROM AUTHOR]

Olfaction is a valuable source of information about the environment that has not been sufficiently exploited in mobile robotics yet. Certainly, odor information can contribute to other sensing modalities, e.g., vision, to accomplish high-level robot activities, such as task planning or execution in human environments. This paper organizes and puts together the developments and experiences on combining olfaction and vision into robotics applications, as the result of our five-years long project IRO: Improvement of the sensory and autonomous capability of Robots through Olfaction. Particularly, it investigates mechanisms to exploit odor information (usually coming in the form of the type of volatile and its concentration) in problems such as object recognition and scene–activity understanding. A distinctive aspect of this research is the special attention paid to the role of semantics within the robot perception and decision-making processes. The obtained results have improved the robot capabilities in terms of efficiency, autonomy, and usefulness, as reported in our publications. [ABSTRACT FROM AUTHOR]

This paper addresses the localization of a gas emission source within a real-world human environment with a mobile robot. Our approach is based on an efficient and coherent system that fuses different sensor modalities (i.e., vision and chemical sensing) to exploit, for the first time, the semantic relationships among the detected gases and the objects visually recognized in the environment. This novel approach allows the robot to focus the search on a finite set of potential gas source candidates (dynamically updated as the robot operates), while accounting for the non-negligible uncertainties in the object recognition and gas classification tasks involved in the process. This approach is particularly interesting for structured indoor environments containing multiple obstacles and objects, enabling the inference of the relations between objects and between objects and gases. A probabilistic Bayesian framework is proposed to handle all these uncertainties and semantic relations, providing an ordered list of candidates to be the source. This candidate list is updated dynamically upon new sensor measurements to account for objects not previously considered in the search process. The exploitation of such probabilities together with information such as the locations of the objects, or the time needed to validate whether a given candidate is truly releasing gases, is delegated to a path planning algorithm based on Markov decision processes to minimize the search time. The system was tested in an office-like scenario, both with simulated and real experiments, to enable the comparison of different path planning strategies and to validate its efficiency under real-world conditions. [ABSTRACT FROM AUTHOR]