Search

This paper presents an innovative technique, Advanced Predictor of Electrical Parameters, based on machine learning methods to predict the degradation of electronic components under the effects of radiation. The term degradation refers to the way in which electrical parameters of the electronic components vary with the irradiation dose. This method consists of two sequential steps defined as 'recognition of degradation patterns in the database' and 'degradation prediction of new samples without any kind of irradiation'. The technique can be used under two different approaches called 'pure data driven' and 'model based'. In this paper, the use of Advanced Predictor of Electrical Parameters is shown for bipolar transistors, but the methodology is sufficiently general to be applied to any other component. [ABSTRACT FROM AUTHOR]

Nuclear fusion is a potential source of energy that could supply the growing needs of the world population for millions of years. Several experimental thermonuclear fusion devices try to understand and control the nuclear fusion process. A very interesting diagnostic called Thomson scattering (TS) is performed in the Spanish fusion device TJ-II. This diagnostic takes images to measure the temperature and density profiles of the plasma, which is heated to very high temperatures to produce fusion plasma. Each image captures spectra of laser light scattered by the plasma under different conditions. Unfortunately, some images are corrupted by noise called stray light that affects the measurement of the profiles. In this work, we propose the use of deep learning models to reduce the stray light that appears in the diagnostic. The proposed approach utilizes a Pix2Pix neural network, which is an image-to-image translation based on a generative adversarial network (GAN). This network learns to translateimages affected by stray light to images without stray light. This allows for the effective removal of the noise that affects the measurements of the TS diagnostic, avoiding the need for manual image processing adjustments. The proposed method shows a better performance, reducing the noise up to 98 % inimages, which surpassesprevious works that obtained 85 % for the validation dataset. [ABSTRACT FROM AUTHOR]

This paper presents the design and implementation of a spherical robot with an internal mechanism based on a pendulum. The design is based on significant improvements made, including an electronics upgrade, to a previous robot prototype developed in our laboratory. Such modifications do not significantly impact its corresponding simulation model previously developed in CoppeliaSim, so it can be used with minor modifications. The robot is incorporated into a real test platform designed and built for this purpose. As part of the incorporation of the robot into the platform, software codes are made to detect its position and orientation, using the system SwisTrack, to control its position and speed. This implementation allows successful testing of control algorithms previously developed by the authors for other robots such as Villela, the Integral Proportional Controller, and Reinforcement Learning. [ABSTRACT FROM AUTHOR]

This article presents the development of a model of a spherical robot that rolls to move and has a single point of support with the surface. The model was developed in the CoppeliaSim simulator, which is a versatile tool for implementing this kind of experience. The model was tested under several scenarios and control goals (i.e., position control, path-following and formation control) with control strategies such as reinforcement learning, and Villela and IPC algorithms. The results of these approaches were compared using performance indexes to analyze the performance of the model under different scenarios. The model and examples with different control scenarios are available online. [ABSTRACT FROM AUTHOR]

This paper describes an interactive virtual laboratory for experimenting with an outdoor tubular photobioreactor (henceforth PBR for short). This virtual laboratory it makes possible to: (a) accurately reproduce the structure of a real plant (the PBR designed and built by the Department of Chemical Engineering of the University of Almería, Spain); (b) simulate a generic tubular PBR by changing the PBR geometry; (c) simulate the effects of changing different operating parameters such as the conditions of the culture (pH, biomass concentration, dissolved O2, inyected CO2, etc.); (d) simulate the PBR in its environmental context; it is possible to change the geographic location of the system or the solar irradiation profile; (e) apply different control strategies to adjust different variables such as the CO2 injection, culture circulation rate or culture temperature in order to maximize the biomass production; (f) simulate the harvesting. In this way, users can learn in an intuitive way how productivity is affected by any change in the design. It facilitates the learning of how to manipulate essential variables for microalgae growth to design an optimal PBR. The simulator has been developed with Easy Java Simulations, a freeware open-source tool developed in Java, specifically designed for the creation of interactive dynamic simulations. [ABSTRACT FROM AUTHOR]

An experimental platform to communicate between a set of mobile robots through a wireless network has been developed. The mobile robots get their position through a camera which performs as sensor. The video images are processed in a PC and a Waspmote card sends the corresponding position to each robot using the ZigBee standard. A distributed control algorithm based on event-triggered communications has been designed and implemented to bring the robots into the desired formation. Each robot communicates to its neighbors only at event times. Furthermore, a simulation tool has been developed to design and perform experiments with the system. An example of usage is presented. [ABSTRACT FROM AUTHOR]

This work presents the development and implementation of a distributed navigation system based on object recognition algorithms. The main goal is to introduce advanced algorithms for image processing and artificial intelligence techniques for teaching control of mobile robots. The autonomous system consists of a wheeled mobile robot with an integrated color camera. The robot navigates through a laboratory scenario where the track and several traffic signals must be detected and recognized by using the images acquired with its on-board camera. The images are sent to a computer server that performs a computer vision algorithm to recognize the objects. The computer calculates the corresponding speeds of the robot according to the object detected. The speeds are sent back to the robot, which acts to carry out the corresponding manoeuvre. Three different algorithms have been tested in simulation and a practical mobile robot laboratory. The results show an average of 84% success rate for object recognition in experiments with the real mobile robot platform. [ABSTRACT FROM AUTHOR]