Search

Motivated by the conflict between travelers' habitual choice behavior and traffic information search behavior, in this paper, a behavioral experiment under different types of traffic information (i.e., per-trip traffic information and en-route traffic information) was designed to obtain data regarding car commuters' daily route choices. Based on the observed data, participants' route choices, habit strength, response time, and information search behaviors were analyzed. It is concluded that, in the beginning, the traffic information had a great influence on the habit participants' route choices, let them think more, and made most of them switch from habit route to the best route (as recommended by traffic information); however, as time went on, the impact of traffic information declined, and several features of habits, such as automatically responding and repeated behavior, would reappear in some participants' decision-making. Meanwhile, the different way of traffic information search behaviors (i.e., in active performance or in passive reception) could cause different information compliance ratios. These results would help to understand the interrelationship between car commuters' daily route choice behaviors and traffic information search behaviors in short-term and in long-term, respectively, and provide an interesting starting point for the development of practical traffic information issuing strategies to enhance the impact of traffic information to alleviate traffic congestion during morning commuting. [ABSTRACT FROM AUTHOR]

The rapid growth in the number of vehicles has led to traffic congestion, pollution, and delays in logistic transportation in metropolitan areas. IoT has been an emerging innovation, moving the universe towards automated processes and intelligent management systems. This is a critical contribution to automation and smart civilizations. Effective and reliable congestion management and traffic control help save many precious resources. An IoT-based ITM system set of sensors is embedded in automatic vehicles and intelligent devices to recognize, obtain, and transmit data. Machine learning (ML) is another technique to improve the transport system. The existing transport-management solutions encounter several challenges resulting in traffic congestion, delay, and a high fatality rate. This research work presents the design and implementation of an Adaptive Traffic-management system (ATM) based on ML and IoT. The design of the proposed system is based on three essential entities: vehicle, infrastructure, and events. The design utilizes various scenarios to cover all the possible issues of the transport system. The proposed ATM system also utilizes the machine-learning-based DBSCAN clustering method to detect any accidental anomaly. The proposed ATM model constantly updates traffic signal schedules depending on traffic volume and estimated movements from nearby crossings. It significantly lowers traveling time by gradually moving automobiles across green signals and decreases traffic congestion by generating a better transition. The experiment outcomes reveal that the proposed ATM system significantly outperformed the conventional traffic-management strategy and will be a frontrunner for transportation planning in smart-city-based transport systems. The proposed ATM solution minimizes vehicle waiting times and congestion, reduces road accidents, and improves the overall journey experience. [ABSTRACT FROM AUTHOR]

Due to the limitations of data transfer technologies, existing studies on urban traffic control mainly focused on isolated dimension control such as traffic signal control or vehicle route guidance to alleviate traffic congestion. However, in real traffic, the distribution of traffic flow is the result of multiple dimensions whose future state is influenced by each dimension's decisions. Presently, the development of the Internet of Vehicles enables an integrated intelligent transportation system. This paper proposes an integrated intelligent transportation model that can optimize predictive traffic signal control and predictive vehicle route guidance simultaneously to alleviate traffic congestion based on their feedback regulation relationship. The challenges of this model lie in that the formulation of the nonlinear feedback relationship between various dimensions is hard to describe and the design of a corresponding solving algorithm that can obtain Pareto optimality for multi-dimension control is complex. In the integrated model, we introduce two medium variables—predictive traffic flow and the predictive waiting time—to two-way link the traffic signal control and vehicle route guidance. Inspired by game theory, an asymmetric information exchange framework-based updating distributed algorithm is designed to solve the integrated model. Finally, an experimental study in two typical traffic scenarios shows that more than 73.33% of the considered cases adopting the integrated model achieve Pareto optimality. [ABSTRACT FROM AUTHOR]

Express lanes (ELs) implementation is a proven strategy to deal with freeway traffic congestion. Dynamic toll pricing schemes effectively achieve reliable travel time on ELs. The primary inputs for the typical dynamic pricing algorithms are vehicular volumes and speeds derived from the data collected by sensors installed along the ELs. Thus, the operation of dynamic pricing critically depends on the accuracy of data collected by such traffic sensors. However, no previous research has been conducted to explicitly investigate the impact of sensor failures and erroneous sensors' data on toll computations. This research fills this gap by examining the effects of sensor failure and faulty detection scenarios on ELs tolls calculated by a dynamic pricing algorithm. The paper's methodology relies on applying the dynamic toll pricing algorithm implemented in the field and utilizing the fundamental speed-volume relationship to 'simulate' the sensors' reported data. We implemented the methodology in a case study of ELs on Interstate-95 in Southeast Florida. The results have shown that the tolls increase when sensors erroneously report higher than actual traffic demand. Moreover, it has been found that the accuracy of individual sensors and the number of sensors utilized to estimate traffic conditions are critical for accurate toll calculations. [ABSTRACT FROM AUTHOR]

Traffic congestion experience in urban areas has negative impact on our daily lives by consuming our time and resources. Intelligent Transportation Systems can provide the necessary infrastructure to mitigate such challenges. In this paper, we propose a novel and scalable solution to model, store and control traffic data based on range query data structures (K-ary Interval Tree and K-ary Entry Point Tree) which allows data representation and handling in a way that better predicts and avoids traffic congestion in urban areas. Our experiments, validation scenarios, performance measurements and solution assessment were done on Brooklyn, New York traffic congestion simulation scenario and shown the validity, reliability, performance and scalability of the proposed solution in terms of time spent in traffic, run-time and memory usage. The experiments on the proposed data structures simulated up to 10,000 vehicles having microseconds time to access traffic information and below 1.5 s for congestion free route generation in complex scenarios. To the best of our knowledge, this is the first scalable approach that can be used to predict urban traffic and avoid congestion through range query data structure traffic modelling. [ABSTRACT FROM AUTHOR]

In this paper, a deep learning-based traffic state discrimination method is proposed to detect traffic congestion at urban intersections. The detection algorithm includes two parts, global speed detection and a traffic state discrimination algorithm. Firstly, the region of interest (ROI) is selected as the road intersection from the input image of the You Only Look Once (YOLO) v3 object detection algorithm for vehicle target detection. The Lucas-Kanade (LK) optical flow method is employed to calculate the vehicle speed. Then, the corresponding intersection state can be obtained based on the vehicle speed and the discrimination algorithm. The detection of the vehicle takes the position information obtained by YOLOv3 as the input of the LK optical flow algorithm and forms an optical flow vector to complete the vehicle speed detection. Experimental results show that the detection algorithm can detect the vehicle speed and traffic state discrimination method can judge the traffic state accurately, which has a strong anti-interference ability and meets the practical application requirements. [ABSTRACT FROM AUTHOR]

Although various unmanned aerial vehicle (UAV)-assisted routing protocols have been proposed for vehicular ad hoc networks, few studies have investigated load balancing algorithms to accommodate future traffic growth and deal with complex dynamic network environments simultaneously. In particular, owing to the extended coverage and clear line-of-sight relay link on a UAV relay node (URN), the possibility of a bottleneck link is high. To prevent problems caused by traffic congestion, we propose Q-learning based load balancing routing (Q-LBR) through a combination of three key techniques, namely, a low-overhead technique for estimating the network load through the queue status obtained from each ground vehicular node by the URN, a load balancing scheme based on Q-learning and a reward control function for rapid convergence of Q-learning. Through diverse simulations, we demonstrate that Q-LBR improves the packet delivery ratio, network utilization and latency by more than 8, 28 and 30%, respectively, compared to the existing protocol. [ABSTRACT FROM AUTHOR]

A rapidly growing number of vehicles in recent years cause long traffic jams and difficulty in the management of traffic in cities. One of the most significant reasons for increased traffic jams on the road is random parking in unauthorized and non-permitted places. In addition, managing of available parking places cannot achieve the expected reduction in traffic congestion related problems due to mismanagement, lack of real-time parking guidance to the drivers, and general ignorance. As the number of roads, highways and related resources has not increased significantly, a rising need for a smart, dynamic and effective parking solution is observed. Accordingly, with the use of multiple sensors, appropriate communication network and advanced processing capabilities of edge and cloud computing, a smart parking system can help manage parking effectively and make it easier for the vehicle owners. In this paper, we propose a multi-layer architecture for smart parking system consisting of multi-parametric parking slot sensor nodes, latest long-range low-power wireless communication technology and Edge-Cloud computation. The proposed system enables dynamic management of parking for large areas while providing useful information to the drivers about available parking locations and related services through near real-time monitoring of vehicles. Furthermore, we propose a dynamic pricing algorithm to yield maximum possible revenue for the parking authority and optimum parking slot availability for the drivers. [ABSTRACT FROM AUTHOR]

Traffic control is one of the most challenging issues in metropolitan cities with growing populations and increased travel demands. Poor traffic control can result in traffic congestion and air pollution that can lead to health issues such as respiratory problems, asthma, allergies, anxiety, and stress. The traffic congestion can also result in travel delays and potential obstruction of emergency services. One of the most well-known traffic control methods is to restrict and control the access of private vehicles in predetermined regions of the city. The aim is to control the traffic load in order to maximize the citizen satisfaction given limited resources. The selection of restricted traffic regions remains a challenge because a large restricted area can reduce traffic load but with reduced citizen satisfaction as their mobility will be limited. On the other hand, a small restricted area may improve citizen satisfaction but with a reduced impact on traffic congestion or air pollution. The optimization of the restricted zone is a dynamic multi-regression problem that may require an intelligent trade-off. This paper proposes Optimal Restricted Driving Zone (ORDZ) using the Genetic Algorithm to select appropriate restricted traffic zones that can optimally control the traffic congestion and air pollution that will result in improved citizen satisfaction. ORDZ uses an augmented genetic algorithm and determinant theory to randomly generate different foursquare zones. This fitness function considers a trade-off between traffic load and citizen satisfaction. Our simulation studies show that ORDZ outperforms the current well-known methods in terms of a combined metric that considers the least traffic load and the most enhanced citizen satisfaction with over 30.6% improvements to some of the comparable methods. [ABSTRACT FROM AUTHOR]

Traffic congestion, especially during peak hours, has become a challenge for transportation systems in many metropolitan areas, and such congestion causes delays and negative effects for passengers. Many studies have examined the prediction of congestion; however, these studies focus mainly on road traffic, and subway transit, which is the main form of transportation in densely populated cities, such as Tokyo, Paris, and Beijing and Shenzhen in China, has seldom been examined. This study takes Shenzhen as a case study for predicting congestion in a subway system during peak hours and proposes a hybrid method that combines a static traffic assignment model with an agent-based dynamic traffic simulation model to estimate recurrent congestion in this subway system. The homes and work places of the residents in this city are collected and taken to represent the traffic demand for the subway system of Shenzhen. An origin-destination (OD) matrix derived from the data is used as an input in this method of predicting traffic, and the traffic congestion is presented in simulations. To evaluate the predictions, data on the congestion condition of subway segments that are released daily by the Shenzhen metro operation microblog are used as a reference, and a comparative analysis indicates the appropriateness of the proposed method. This study could be taken as an example for similar studies that model subway traffic in other cities. [ABSTRACT FROM AUTHOR]