Search

The various applications of bearing-only sensor networks for detection and localization are becoming increasingly widespread and important. The array layout of the bearing-only sensor network seriously impacts the detection performance. This paper proposes a multi-strategy fusion improved adaptive mayfly algorithm (MIAMA) in a bearing-only sensor network to perform layout planning on the geometric configuration of the optimal detection. Firstly, the system model of a bearing-only sensor network was constructed, and the observability of the system was analyzed based on the Cramer–Rao Lower Bound and Fisher Information Matrix. Then, in view of the limitations of the traditional mayfly algorithm, which has a single initial population and no adaptability and poor global search capabilities, multi-strategy fusion improvements were carried out by introducing Tent chaos mapping, the adaptive inertia weight factor, and Random Opposition-based Learning. Finally, three simulation experiments were conducted. Through comparison with the Particle Swarm Optimization (PSO) algorithm, Mayfly Algorithm (MA), and Genetic Algorithm (GA), the effectiveness and superiority of the proposed MIAMA were validated. [ABSTRACT FROM AUTHOR]

The mobile node location method can find unknown nodes in real time and capture the movement trajectory of unknown nodes in time, which has attracted more and more attention from researchers. Due to their advantages of simplicity and efficiency, intelligent optimization algorithms are receiving increasing attention. Compared with other algorithms, the black hole algorithm has fewer parameters and a simple structure, which is more suitable for node location in wireless sensor networks. To address the problems of weak merit-seeking ability and slow convergence of the black hole algorithm, this paper proposed an opposition-based learning black hole (OBH) algorithm and utilized it to improve the accuracy of the mobile wireless sensor network (MWSN) localization. To verify the performance of the proposed algorithm, this paper tests it on the CEC2013 test function set. The results indicate that among the several algorithms tested, the OBH algorithm performed the best. In this paper, several optimization algorithms are applied to the Monte Carlo localization algorithm, and the experimental results show that the OBH algorithm can achieve the best optimization effect in advance. [ABSTRACT FROM AUTHOR]

Wireless sensors networks (WSNs) play an important role in life. With the development of 5G, its security issues have also raised concerns. Therefore, it is an important topic to study the offense and defense confrontation in WSNs. A complete information static game model is established to analyze the offense and defense confrontation problem of WSNs in 5G. An adaptive equilibrium optimizer algorithm (AEO) based on parameter adaptive strategy is proposed, which can jump out of the local optimal solution better. Experiments show that the optimization ability of AEO outperforms other algorithms on at least 80 % of the 23 classical test functions of CEC. The convergence speed of AEO is better in the early stage of population iteration. The optimal offensive and defensive strategy under different offense and defense resources through simulation experiments is analyzed. The conclusion shows that when the offensive resources are large, the offender takes an indiscriminate attack. When the defense resources are small, the defender should defend the most important elements, and when the defense resources are large, the defender should allocate the same resources to defend each element to obtain the maximum benefit. This paper provides new solution ideas for the security problems under the offense and defense game in WSNs. [ABSTRACT FROM AUTHOR]

Many animal aggregations display remarkable collective coordinated movements on a large scale, which emerge as a result of distributed local decision-making by individuals. The recent advances in modelling the collective motion of animals through the utilisation of Nearest Neighbour rules, without the need for centralised coordination, resulted in the development of self-deployment algorithms in Mobile Sensor Networks (MSNs) to achieve various types of coverage essential for different applications. However, the energy consumption associated with sensor movement to achieve the desired coverage remains a significant concern for the majority of algorithms reported in the literature. In this paper, the Nearest Neighbour Node Deployment (NNND) algorithm is proposed to efficiently provide blanket coverage across a given area while minimising energy consumption and enhancing fault tolerance. In contrast to other algorithms that sequentially move sensors, NNND leverages the power of parallelism by employing multiple streams of sensor motions, each directed towards a distinct section of the area. The cohesion of each stream is maintained by adaptively choosing a leader for each stream while collision avoidance is also ensured. These properties contribute to minimising the travel distance within each stream, resulting in decreased energy consumption. Additionally, the utilisation of multiple leaders in NNND eliminates the presence of a single point of failure, hence enhancing the fault tolerance of the area coverage. The results of our extensive simulation study demonstrate that NNND not only achieves lower energy consumption but also a higher percentage of k-coverage. [ABSTRACT FROM AUTHOR]

Efficient routing is essential for the proper functioning of wireless sensor networks (WSNs). Recent research has focused on optimizing energy and delay for these networks. Nevertheless, there is a dearth of studies that have examined the effects of volatile settings, such as chemical plants, coal mines, nuclear power plants, and battlefields, where connectivity is inconsistent. In such contexts, sensor networks may face security incidents, and environmental factors such as node movement and death can result in dynamic changes to the network topology. A novel design algorithm grounded on Dynamic Minimum Hop Selection (DMHS) was introduced in this paper. The key principle behind DMHS is to use a probabilistic forwarding decision-making process through a distributed route discovery strategy that utilizes dynamically adjusted minimum hop counts of nodes. Simulation results indicate that the life cycle of the DMHS algorithm increases by more than 12% over 700 nodes when compared to the traditional energy-saving algorithm. Furthermore, our algorithm performs better in the average delivery rate of node, and has a 10% to 21% improvement compared to the other algorithms. Overall, the DMHS algorithm represents an important contribution to the development of WSNs that can function robustly in high-risk and unstable environments. [ABSTRACT FROM AUTHOR]

Underwater sensor networks play a crucial role in collecting valuable data to monitor offshore aquaculture infrastructures. The number of deployed devices not only impacts the bandwidth for a highly constrained communication environment, but also the cost of the sensor network. On the other hand, industrial and literature current meters work as raw data loggers, and most of the calculations to determine the fundamental frequencies are performed offline on a desktop computer or in the cloud. Belonging to the edge computing research area, this paper presents an algorithm to extract the fundamental frequencies of water currents in an underwater sensor network deployed in offshore aquaculture infrastructures. The target sensor node is based on a commercial ultra-low-power microcontroller. The proposed fundamental frequency identification algorithm only requires the use of an integer arithmetic unit. Our approach exploits the mathematical properties of the finite impulse response (FIR) filtering in the integer domain. The design and implementation of the presented algorithm are discussed in detail in terms of FIR tuning/coefficient selection, memory usage and variable domain for its mathematical formulation aimed at reducing the computational effort required. The approach is validated using a shallow water current model and real-world raw data from an offshore aquaculture infrastructure. The extracted frequencies have a maximum error below a 4%. [ABSTRACT FROM AUTHOR]

Path coverage attracts many interests in some scenarios, such as object tracing in sensor networks. However, the problem of how to conserve the constrained energy of sensors is rarely considered in existing research. This paper studies two problems in the energy conservation of sensor networks that have not been addressed before. The first problem is called the least movement of nodes on path coverage. It first proves the problem as NP-hard, and then uses curve disjunction to separate each path into some discrete points, and ultimately moves nodes to new positions under some heuristic regulations. The utilized curve disjunction technique makes the proposed mechanism unrestricted by the linear path. The second problem is called the largest lifetime on path coverage. It first separates all nodes into independent partitions by utilizing the method of largest weighted bipartite matching, and then schedules these partitions to cover all paths in the network by turns. We eventually analyze the energy cost of the two proposed mechanisms, and evaluate the effects of some parameters on performance through extensive experiments, respectively. [ABSTRACT FROM AUTHOR]

The Chinese Remainder Theorem (CRT) based frequency estimation has been widely studied during the past two decades. It enables one to estimate frequencies by sub-Nyquist sampling rates, which reduces the cost of hardware in a sensor network. Several studies have been done on the complex waveform; however, few works studied its applications in the real waveform case. Different from the complex waveform, existing CRT methods cannot be straightforwardly applied to handle a real waveform's spectrum due to the spurious peaks. To tackle the ambiguity problem, in this paper, we propose the first polynomial-time closed-form Robust CRT (RCRT) for the single-tone real waveform, which can be considered as a special case of RCRT for arbitrary two numbers. The time complexity of the proposed algorithm is O (L) , where L is the number of samplers. Furthermore, our algorithm also matches the optimal error-tolerance bound. [ABSTRACT FROM AUTHOR]

Blockchain has revolutionized many fields, such as distributed sensor networks, finance, and cryptocurrency. Consensus between distributed network nodes is at the core of such blockchain technologies. The three primary performance measures for any consensus algorithm are scalability, security, and decentralization. This paper evaluates the usefulness and practicality of quantum consensus algorithms for blockchain-enhanced sensor, and computing networks and evaluates them against the aforementioned performance measures. In particular, we investigate their noise robustness against quantum decoherence in quantum processors and over fiber-optic channels. We observe that the quantum noise generally increases the error rate in the list distribution. However, the effect is variable on different quantum consensus schemes. For example, the entanglement-free scheme is more affected than entanglement-based schemes for the local noise cases, while in the case of noisy optical fiber links, the effect is prominent on all quantum consensus schemes. We infer that the current quantum protocols with noisy intermediate-scale quantum devices and noisy quantum communication can only be employed for modular units in intraenterprise-level blockchain, such as Zilliqa, for sensor, and computing networks. [ABSTRACT FROM AUTHOR]

Because mobile ad hoc networks have characteristics such as lack of center nodes, multi-hop routing and changeable topology, the existing checkpoint technologies for normal mobile networks cannot be applied well to mobile ad hoc networks. Considering the multi-frequency hierarchy structure of ad hoc networks, this paper proposes a hybrid checkpointing strategy which combines the techniques of synchronous checkpointing with asynchronous checkpointing, namely the checkpoints of mobile terminals in the same cluster remain synchronous, and the checkpoints in different clusters remain asynchronous. This strategy could not only avoid cascading rollback among the processes in the same cluster, but also avoid too many message transmissions among the processes in different clusters. What is more, it can reduce the communication delay. In order to assure the consistency of the global states, this paper discusses the correctness criteria of hybrid checkpointing, which includes the criteria of checkpoint taking, rollback recovery and indelibility. Based on the designed Intra-Cluster Checkpoint Dependence Graph and Inter-Cluster Checkpoint Dependence Graph, the elimination rules for different kinds of checkpoints are discussed, and the algorithms for the same cluster checkpoints, different cluster checkpoints, and rollback recovery are also given. Experimental results demonstrate the proposed hybrid checkpointing strategy is a preferable trade-off method, which not only synthetically takes all kinds of resource constraints of Ad hoc networks into account, but also outperforms the existing schemes in terms of the dependence to cluster heads, the recovery time compared to the pure synchronous, and the pure asynchronous checkpoint advantage. [ABSTRACT FROM AUTHOR]

In order to ensure the safety of spacecrafts in orbit, impact location is an important part of structural health monitoring systems. In this paper, an impact location algorithm based on posterior probability correlation is proposed to solve the problem, that is, the impact point in the stiffened structure of a spacecraft is difficult to locate. The algorithm combines the Gaussian cross-correlation possibility weight method and the Bayesian posterior probability method. The cross-correlation possibility weight superposition based on grids was used to reduce the dependence of the accuracy of time difference extraction. Gaussian and normalized fitting were used to compensate the reflection, modal transformation, and amplitude attenuation of a stiffened plate. The location result was further optimized by the posterior probability. The proposed algorithm can be applied to the impact source localization of complex stiffened plate structures. The experiment results showed that the average location error can be 2.57 cm with proper sensor network schemes. [ABSTRACT FROM AUTHOR]

The Distance Vector-Hop (DV-Hop) algorithm is the most well-known range-free localization algorithm based on the distance vector routing protocol in wireless sensor networks; however, it is widely known that its localization accuracy is limited. In this paper, DEIDV-Hop is proposed, an enhanced wireless sensor node localization algorithm based on the differential evolution (DE) and improved DV-Hop algorithms, which improves the problem of potential error about average distance per hop. Introduced into the random individuals of mutation operation that increase the diversity of the population, random mutation is infused to enhance the search stagnation and premature convergence of the DE algorithm. On the basis of the generated individual, the social learning part of the Particle Swarm (PSO) algorithm is embedded into the crossover operation that accelerates the convergence speed as well as improves the optimization result of the algorithm. The improved DE algorithm is applied to obtain the global optimal solution corresponding to the estimated location of the unknown node. Among the four different network environments, the simulation results show that the proposed algorithm has smaller localization errors and more excellent stability than previous ones. Still, it is promising for application scenarios with higher localization accuracy and stability requirements. [ABSTRACT FROM AUTHOR]

In various unmanned aerial vehicle (UAV) imaging applications, the multisensor super-resolution (SR) technique has become a chronic problem and attracted increasing attention. Multisensor SR algorithms utilize multispectral low-resolution (LR) images to make a higher resolution (HR) image to improve the performance of the UAV imaging system. The primary objective of the paper is to develop a multisensor SR method based on the existing multispectral imaging framework instead of using additional sensors. In order to restore image details without noise amplification or unnatural post-processing artifacts, this paper presents an improved regularized SR algorithm by combining the directionally-adaptive constraints and multiscale non-local means (NLM) filter. As a result, the proposed method can overcome the physical limitation of multispectral sensors by estimating the color HR image from a set of multispectral LR images using intensity-hue-saturation (IHS) image fusion. Experimental results show that the proposed method provides better SR results than existing state-of-the-art SR methods in the sense of objective measures. [ABSTRACT FROM AUTHOR]

This paper presents a ZigBee In-Patient Monitoring system embedded with a new ZigBee mobility management solution. The system enables ZigBee device mobility in a fixed ZigBee network. The usage, the architecture and the mobility framework are discussed in details in the paper. The evaluation shows that the new algorithm offers a good efficiency, resulting in a low management cost. In addition, the system can save lives by providing a panic button and can be used as a location tracking service. A case study focused on the Princes of Wales Hospital in Hong Kong is presented and findings are given. This investigation reveals that the developed mobile solutions offer promising value-added services for many potential ZigBee applications. [ABSTRACT FROM AUTHOR]

Real-time performance is important in rule-based continuous spatiotemporal query processing for risk analysis and decision making of target objects collected by sensors of combat vessels. The existing Rete algorithm, which creates a compiled node link structure for executing rules, is known to be the best. However, when a large number of rules are to be processed and the stream data to be performed are large, the Rete technique has an overhead of searching for rules to be bound. This paper proposes a hashing indexing technique for Rete nodes to the overhead of searching for spatiotemporal condition rules that must be bound when rules are expressed in a node link structure. A performance comparison evaluation experiment was conducted with Drool, which implemented the Rete method, and the method that implemented the hash index method presented in this paper. For performance measurement, processing time was measured for the change in the number of rules, the change in the number of objects, and the distribution of objects. The hash index method presented in this paper improved performance by at least 18% compared to Drool. [ABSTRACT FROM AUTHOR]

The pass/fail form is one of the presentation methods of quality assessment results. The authors, as part of a research team, participated in the process of creating the PRIME interface analyzer. The PRIME interface is a standardized interface—considered as communication technology for smart metering wired networks, which are specific kinds of sensor networks. The frame error ratio (FER) assessment and its presentation in the pass/fail form was one of the problems that needed to be solves in the PRIME analyzer project. In this paper, the authors present their method of a unified FER assessment, which was implemented in the PRIME analyzer, as one of its many functionalities. The need for FER unification is the result of using different modulation types and an optional forward error correction mechanism in the PRIME interface. Having one unified FER and a threshold value makes it possible to present measurement results in the pass/fail form. For FER unification, the characteristics of FER vs. signal-to-noise ratio, for all modulations implemented in PRIME, were used in the proposed algorithm (and some are presented in this paper). In communication systems, the FER value is used to forecast the quality of a link or service, but using PLC technology, forecasting is highly uncertain due to the main noise. The presentation of the measurement results in the pass/fail form is important because it allows unskilled staff to make many laborious measurements in last mile smart metering networks. [ABSTRACT FROM AUTHOR]

The vehicular participatory sensing network (VPSN) is now becoming more and more prevalent, and additionally has shown its great potential in various applications. A general VPSN consists of many tasks from task, publishers, trading platforms and a crowd of participants. Some literature treats publishers and the trading platform as a whole, which is impractical since they are two independent economic entities with respective purposes. For a trading platform in markets, its purpose is to maximize the profit by selecting tasks and recruiting participants who satisfy the requirements of accepted tasks, rather than to improve the quality of each task. This scheduling problem for a trading platform consists of two parts: which tasks should be selected and which participants to be recruited? In this paper, we investigate the scheduling problem in vehicular participatory sensing with the predictable mobility of each vehicle. A genetic-based trading scheduling algorithm (GTSA) is proposed to solve the scheduling problem. Experiments with a realistic dataset of taxi trajectories demonstrate that GTSA algorithm is efficient for trading platforms to gain considerable profit in VPSN. [ABSTRACT FROM AUTHOR]

Cognitive radio sensor networks are one of the kinds of application where cognitive techniques can be adopted and have many potential applications, challenges and future research trends. According to the research surveys, dynamic spectrum access is an important and necessary technology for future cognitive sensor networks. Traditional methods of dynamic spectrum access are based on spectrum holes and they have some drawbacks, such as low accessibility and high interruptibility, which negatively affect the transmission performance of the sensor networks. To address this problem, in this paper a new initialization mechanism is proposed to establish a communication link and set up a sensor network without adopting spectrum holes to convey control information. Specifically, firstly a transmission channel model for analyzing the maximum accessible capacity for three different polices in a fading environment is discussed. Secondly, a hybrid spectrum access algorithm based on a reinforcement learning model is proposed for the power allocation problem of both the transmission channel and the control channel. Finally, extensive simulations have been conducted and simulation results show that this new algorithm provides a significant improvement in terms of the tradeoff between the control channel reliability and the efficiency of the transmission channel. [ABSTRACT FROM AUTHOR]

Localization is crucial for the monitoring applications of cities, such as road monitoring, environment surveillance, vehicle tracking, etc. In urban road sensor networks, sensors are often sparely deployed due to the hardware cost. Under this sparse deployment, sensors cannot communicate with each other via ranging hardware or one-hop connectivity, rendering the existing localization solutions ineffective. To address this issue, this paper proposes a novel Traffic Lights Schedule-based localization algorithm (TLS), which is built on the fact that vehicles move through the intersection with a known traffic light schedule. We can first obtain the law by binary vehicle detection time stamps and describe the law as a matrix, called a detection matrix. At the same time, we can also use the known traffic light information to construct the matrices, which can be formed as a collection called a known matrix collection. The detection matrix is then matched in the known matrix collection for identifying where sensors are located on urban roads. We evaluate our algorithm by extensive simulation. The results show that the localization accuracy of intersection sensors can reach more than 90%. In addition, we compare it with a state-of-the-art algorithm and prove that it has a wider operational region. [ABSTRACT FROM AUTHOR]

The IP-based Ubiquitous Sensor Network (IP-USN) is an effort to build the "Internet of things". By utilizing IP for low power networks, we can benefit from existing well established tools and technologies of IP networks. Along with many other unresolved issues, securing IP-USN is of great concern for researchers so that future market satisfaction and demands can be met. Without proper security measures, both reactive and proactive, it is hard to envisage an IP-USN realm. In this paper we present a design of an IDS (Intrusion Detection System) called RIDES (Robust Intrusion DEtection System) for IP-USN. RIDES is a hybrid intrusion detection system, which incorporates both Signature and Anomaly based intrusion detection components. For signature based intrusion detection this paper only discusses the implementation of distributed pattern matching algorithm with the help of signature-code, a dynamically created attack-signature identifier. Other aspects, such as creation of rules are not discussed. On the other hand, for anomaly based detection we propose a scoring classifier based on the SPC (Statistical Process Control) technique called CUSUM charts. We also investigate the settings and their effects on the performance of related parameters for both of the components. [ABSTRACT FROM AUTHOR]

In today's data networks, the main protocol used to ensure reliable communications is the transmission control protocol (TCP). The TCP performance is largely determined by the used congestion control (CC) algorithm. TCP CC algorithms have evolved over the past three decades and a large number of CC algorithm variations have been developed to accommodate various network environments. The fifth-generation (5G) mobile network presents a new challenge for the implementation of the TCP CC mechanism, since networks will operate in environments with huge user device density and vast traffic flows. In contrast to the pre-5G networks that operate in the sub-6 GHz bands, the implementation of TCP CC algorithms in 5G mmWave communications will be further compromised with high variations in channel quality and susceptibility to blockages due to high penetration losses and atmospheric absorptions. These challenges will be particularly present in environments such as sensor networks and Internet of Things (IoT) applications. To alleviate these challenges, this paper provides an overview of the most popular single-flow and multy-flow TCP CC algorithms used in pre-5G networks. The related work on the previous examinations of TCP CC algorithm performance in 5G networks is further presented. A possible implementation of TCP CC algorithms is thoroughly analysed with respect to the specificities of 5G networks, such as the usage of high frequencies in the mmWave spectrum, the frequent horizontal and vertical handovers, the implementation of the 5G core network, the usage of beamforming and data buffering, the exploitation of edge computing, and the constantly transmitted always-on signals. Moreover, the capabilities of machine learning technique implementations for the improvement of TCPs CC performance have been presented last, with a discussion on future research opportunities that can contribute to the improvement of TCP CC implementation in 5G networks. This survey paper can serve as the basis for the development of novel solutions that will ensure the reliable implementation of TCP CC in different usage scenarios of 5G networks. [ABSTRACT FROM AUTHOR]

Localization is one of the hottest research topics in Underwater Wireless Sensor Networks (UWSNs), since many important applications of UWSNs, e.g., event sensing, target tracking and monitoring, require location information of sensor nodes. Nowadays, a large number of localization algorithms have been proposed for UWSNs. How to improve location accuracy are well studied. However, few of them take location reliability or security into consideration. In this paper, we propose a Collaborative Secure Localization algorithm based on Trust model (CSLT) for UWSNs to ensure location security. Based on the trust model, the secure localization process can be divided into the following five sub-processes: trust evaluation of anchor nodes, initial localization of unknown nodes, trust evaluation of reference nodes, selection of reference node, and secondary localization of unknown node. Simulation results demonstrate that the proposed CSLT algorithm performs better than the compared related works in terms of location security, average localization accuracy and localization ratio. [ABSTRACT FROM AUTHOR]

This paper describes an efficient, decentralized algorithm to monitor qualitative spatial events in a dynamic scalar field. The events of interest involve changes to the critical points (i.e., peak, pits and passes) and edges of the surface network derived from the field. Four fundamental types of event (appearance, disappearance, movement and switch) are defined. Our algorithm is designed to rely purely on qualitative information about the neighborhoods of nodes in the sensor network and does not require information about nodes' coordinate positions. Experimental investigations confirm that our algorithm is efficient, with O(n) overall communication complexity (where n is the number of nodes in the sensor network), an even load balance and low operational latency. The accuracy of event detection is comparable to established centralized algorithms for the identification of critical points of a surface network. Our algorithm is relevant to a broad range of environmental monitoring applications of sensor networks. [ABSTRACT FROM AUTHOR]

Distributed density estimation in sensor networks has received much attention due to its broad applicability. When encountering high-dimensional observations, a mixture of factor analyzers (MFA) is taken to replace mixture of Gaussians for describing the distributions of observations. In this paper, we study distributed density estimation based on a mixture of factor analyzers. Existing estimation algorithms of the MFA are for the centralized case, which are not suitable for distributed processing in sensor networks. We present distributed density estimation algorithms for the MFA and its extension, the mixture of Student's t-factor analyzers (MtFA). We first define an objective function as the linear combination of local log-likelihoods. Then, we give the derivation process of the distributed estimation algorithms for the MFA and MtFA in details, respectively. In these algorithms, the local sufficient statistics (LSS) are calculated at first and diffused. Then, each node performs a linear combination of the received LSS from nodes in its neighborhood to obtain the combined sufficient statistics (CSS). Parameters of the MFA and the MtFA can be obtained by using the CSS. Finally, we evaluate the performance of these algorithms by numerical simulations and application example. Experimental results validate the promising performance of the proposed algorithms. [ABSTRACT FROM AUTHOR]

Localization as a technique to solve the complex and challenging problems besetting line-of-sight (LOS) and non-line-of-sight (NLOS) transmissions has recently attracted considerable attention in the wireless sensor network field. This paper proposes a strategy for eliminating NLOS localization errors during calculation of the location of mobile terminals (MTs) in unfamiliar indoor environments. In order to improve the hidden Markov model (HMM), we propose two modified algorithms, namely, modified HMM (M-HMM) and replacement modified HMM (RM-HMM). Further, a hybrid localization algorithm that combines HMM with an interacting multiple model (IMM) is proposed to represent the velocity of mobile nodes. This velocity model is divided into a high-speed and a low-speed model, which means the nodes move at different speeds following the same mobility pattern. Each moving node continually switches its state based on its probability. Consequently, to improve precision, each moving node uses the IMM model to integrate the results from the HMM and its modified forms. Simulation experiments conducted show that our proposed algorithms perform well in both distance estimation and coordinate calculation, with increasing accuracy of localization of the proposed algorithms in the order M-HMM, RM-HMM, and HMM + IMM. The simulations also show that the three algorithms are accurate, stable, and robust. [ABSTRACT FROM AUTHOR]

This paper considers the problem of path planning for a team of unmanned aerial vehicles performing surveillance near a friendly base. The unmanned aerial vehicles do not possess sensors with automated target recognition capability and, thus, rely on communicating with unattended ground sensors placed on roads to detect and image potential intruders. The problem is motivated by persistent intelligence, surveillance, reconnaissance and base defense missions. The problem is formulated and shown to be intractable. A heuristic algorithm to coordinate the unmanned aerial vehicles during surveillance and pursuit is presented. Revisit deadlines are used to schedule the vehicles' paths nominally. The algorithm uses detections from the sensors to predict intruders' locations and selects the vehicles' paths by minimizing a linear combination of missed deadlines and the probability of not intercepting intruders. An analysis of the algorithm's completeness and complexity is then provided. The effectiveness of the heuristic is illustrated through simulations in a variety of scenarios. [ABSTRACT FROM AUTHOR]

Deformation is the direct cause of heritage object collapse. It is significant to monitor and signal the early warnings of the deformation of heritage objects. However, traditional heritage object monitoring methods only roughly monitor a simple-shaped heritage object as a whole, but cannot monitor complicated heritage objects, which may have a large number of surfaces inside and outside. Wireless sensor networks, comprising many small-sized, low-cost, low-power intelligent sensor nodes, are more useful to detect the deformation of every small part of the heritage objects. Wireless sensor networks need an effective mechanism to reduce both the communication costs and energy consumption in order to monitor the heritage objects in real time. In this paper, we provide an effective heritage object deformation detection and tracking method using wireless sensor networks (EffeHDDT). In EffeHDDT, we discover a connected core set of sensor nodes to reduce the communication cost for transmitting and collecting the data of the sensor networks. Particularly, we propose a heritage object boundary detecting and tracking mechanism. Both theoretical analysis and experimental results demonstrate that our EffeHDDT method outperforms the existing methods in terms of network traffic and the precision of the deformation detection. [ABSTRACT FROM AUTHOR]

Maintaining effective coverage and extending the network lifetime as much as possible has become one of the most critical issues in the coverage of WSNs. In this paper, we propose a multi-objective coverage optimization algorithm for WSNs, namely MOCADMA, which models the coverage control of WSNs as the multi-objective optimization problem. MOCADMA uses a memetic algorithm with a dynamic local search strategy to optimize the coverage of WSNs and achieve the objectives such as high network coverage, effective node utilization and more residual energy. In MOCADMA, the alternative solutions are represented as the chromosomes in matrix form, and the optimal solutions are selected through numerous iterations of the evolution process, including selection, crossover, mutation, local enhancement, and fitness evaluation. The experiment and evaluation results show MOCADMA can have good capabilities in maintaining the sensing coverage, achieve higher network coverage while improving the energy efficiency and effectively prolonging the network lifetime, and have a significant improvement over some existing algorithms. [ABSTRACT FROM AUTHOR]

The aim of this paper is to introduce a NUT model (NUT: network-uncertainty-trust) that aids the decrease of the uncertainty of measurements in autonomous hybrid Internet of Things sensor networks. The problem of uncertainty in such networks is a consequence of various operating conditions and varied quality of measurement nodes, making statistical approach less successful. This paper presents a model for decreasing the uncertainty through the use of socially inspired metaphors of reputation, trust, and confidence that are the untapped latent information. The model described in the paper shows how the individual reputation of each node can be assessed on the basis of opinions provided by other nodes of the hybrid measurement network, and that this method allows to assess the extent of uncertainty the node introduces to the network. This, in turn, allows nodes of low uncertainty to have a greater impact on the reconstruction of values. The verification of the model, as well as examples of its applicability to air quality measurements are presented as well. Simulations demonstrate that the use of the model can decrease the uncertainty by up to 55% while using the EWMA (exponentially weighted moving average) algorithm, as compared to the reference one. [ABSTRACT FROM AUTHOR]

Energy efficiency is one of the critical challenges in wireless sensor networks (WSNs). WSNs collect and transmit data through sensor nodes. However, the energy carried by the sensor nodes is limited. The sensor nodes need to save energy as much as possible to prolong the network lifetime. This paper proposes a game theory-based energy-efficient clustering algorithm (GEC) for wireless sensor networks, where each sensor node is regarded as a player in the game. According to the length of idle listening time in the active state, the sensor node can adopt favorable strategies for itself, and then decide whether to sleep or not. In order to avoid the selfish behavior of sensor nodes, a penalty mechanism is introduced to force the sensor nodes to adopt cooperative strategies in future operations. The simulation results show that the use of game theory can effectively save the energy consumption of the sensor network and increase the amount of network data transmission, so as to achieve the purpose of prolonging the network lifetime. [ABSTRACT FROM AUTHOR]

Underwater acoustic localization is a useful technique applied to any military and civilian applications. Among the range-based underwater acoustic localization methods, the time difference of arrival (TDOA) has received much attention because it is easy to implement and relatively less affected by the underwater environment. This paper proposes a TDOA-based localization algorithm for an underwater acoustic sensor network using the maximum-likelihood (ML) ratio criterion. To relax the complexity of the proposed localization complexity, we construct an auxiliary function, and use the majorization-minimization (MM) algorithm to solve it. The proposed localization algorithm proposed in this paper is called a T-MM algorithm. T-MM is applying the MM algorithm to the TDOA acoustic-localization technique. As the MM algorithm iterations are sensitive to the initial points, a gradient-based initial point algorithm is used to set the initial points of the T-MM scheme. The proposed T-MM localization scheme is evaluated based on squared position error bound (SPEB), and through calculation, we get the SPEB expression by the equivalent Fisher information matrix (EFIM). The simulation results show how the proposed T-MM algorithm has better performance and outperforms the state-of-the-art localization algorithms in terms of accuracy and computation complexity even under a high presence of underwater noise. [ABSTRACT FROM AUTHOR]

In wireless sensor networks (WSN), flooding increases the reliability in terms of successful transmission of a packet with higher overhead. The flooding consumes the resources of the network quickly, especially in sensor networks, mobile ad-hoc networks, and vehicular ad-hoc networks in terms of the lifetime of the node, lifetime of the network, and battery lifetime, etc. This paper aims to develop an efficient and reliable protocol by using multicasting and unicasting to overcome the issue of higher overhead due to flooding. Unicasting is used when the desired destination is at a minimum distance to avoid an extra overhead and increases the efficiency of the network in terms of overhead and energy because unicasting is favorable where the distance is minimum. Similarly, multicasting is used when the desired destination is at maximum distance and increases the network's reliability in terms of throughput. The results are implemented in the Department of Computer Science, Bacha Khan University Charsadda (BKUC), Pakistan, as well as in the Network Simulator-2 (NS-2). The results are compared with benchmark schemes such as PUMA and ERASCA, and based on the results, the performance of the proposed approach is improved in terms of overhead, throughput, and packet delivery fraction by avoiding flooding. [ABSTRACT FROM AUTHOR]

Wireless Sensors Networks have been the focus of significant attention from research and development due to their applications of collecting data from various fields such as smart cities, power grids, transportation systems, medical sectors, military, and rural areas. Accurate and reliable measurements for insightful data analysis and decision-making are the ultimate goals of sensor networks for critical domains. However, the raw data collected by WSNs usually are not reliable and inaccurate due to the imperfect nature of WSNs. Identifying misbehaviours or anomalies in the network is important for providing reliable and secure functioning of the network. However, due to resource constraints, a lightweight detection scheme is a major design challenge in sensor networks. This paper aims at designing and developing a lightweight anomaly detection scheme to improve efficiency in terms of reducing the computational complexity and communication and improving memory utilization overhead while maintaining high accuracy. To achieve this aim, one-class learning and dimension reduction concepts were used in the design. The One-Class Support Vector Machine (OCSVM) with hyper-ellipsoid variance was used for anomaly detection due to its advantage in classifying unlabelled and multivariate data. Various One-Class Support Vector Machine formulations have been investigated and Centred-Ellipsoid has been adopted in this study due to its effectiveness. Centred-Ellipsoid is the most effective kernel among studies formulations. To decrease the computational complexity and improve memory utilization, the dimensions of the data were reduced using the Candid Covariance-Free Incremental Principal Component Analysis (CCIPCA) algorithm. Extensive experiments were conducted to evaluate the proposed lightweight anomaly detection scheme. Results in terms of detection accuracy, memory utilization, computational complexity, and communication overhead show that the proposed scheme is effective and efficient compared few existing schemes evaluated. The proposed anomaly detection scheme achieved the accuracy higher than 98%, with O (nd) memory utilization and no communication overhead. [ABSTRACT FROM AUTHOR]

Location-based applications for security and assisted living, such as human location tracking, pet tracking and others, have increased considerably in the last few years, enabled by the fast growth of sensor networks. Sensor location information is essential for several network protocols and applications such as routing and energy harvesting, among others. Therefore, there is a need for developing new alternative localization algorithms suitable for rough, changing environments. In this paper, we formulate the Recursive Localization (RL) algorithm, based on the recursive coordinate data fusion using at least three anchor nodes (ANs), combined with a multiplane location estimation, suitable for 3D ad hoc environments. The novelty of the proposed algorithm is the recursive fusion technique to obtain a reliable location estimation of a node by combining noisy information from several nodes. The feasibility of the RL algorithm under several network environments was examined through analytic formulation and simulation processes. The proposed algorithm improved the location accuracy for all the scenarios analyzed. Comparing with other 3D range-based positioning algorithms, we observe that the proposed RL algorithm presents several advantages, such as a smaller number of required ANs and a better position accuracy for the worst cases analyzed. On the other hand, compared to other 3D range-free positioning algorithms, we can see an improvement by around 15.6% in terms of positioning accuracy. [ABSTRACT FROM AUTHOR]

In this paper, we examine routing protocols with the shortest path in sensor networks. In doing this, we propose a genetic algorithm (GA)-based Ad Hoc On-Demand Multipath Distance Vector routing protocol (GA-AOMDV). We utilize a fitness function that optimizes routes based on the energy consumption in their nodes. We compare this algorithm with other existing ad hoc routing protocols including LEACH-GA, GA-AODV, AODV, DSR, EPAR, EBAR_BFS. Results prove that our protocol enhances the network performance in terms of packet delivery ratio, throughput, round trip time and energy consumption. GA-AOMDV protocol achieves average gain that is 7 to 22% over other protocols. Therefore, our protocol extends the network lifetime for data communications. [ABSTRACT FROM AUTHOR]

Due to the rapid increase in the usage and demand of wireless sensor networks (WSN), the limited frequency spectrum available for WSN applications will be extremely crowded in the near future. More sensor devices also mean more recharging/replacement of batteries, which will cause significant impact on the global carbon footprint. In this paper, we propose a relay-assisted cognitive radio sensor network (CRSN) that allocates communication resources in an environmentally friendly manner. We use shared band amplify and forward relaying for cooperative communication in the proposed CRSN. We present a multi-objective optimization architecture for resource allocation in a green cooperative cognitive radio sensor network (GC-CRSN). The proposed multi-objective framework jointly performs relay assignment and power allocation in GC-CRSN, while optimizing two conflicting objectives. The first objective is to maximize the total throughput, and the second objective is to minimize the total transmission power of CRSN. The proposed relay assignment and power allocation problem is a non-convex mixed-integer non-linear optimization problem (NC-MINLP), which is generally non-deterministic polynomial-time (NP)-hard. We introduce a hybrid heuristic algorithm for this problem. The hybrid heuristic includes an estimation-of-distribution algorithm (EDA) for performing power allocation and iterative greedy schemes for constraint satisfaction and relay assignment. We analyze the throughput and power consumption tradeoff in GC-CRSN. A detailed analysis of the performance of the proposed algorithm is presented with the simulation results. [ABSTRACT FROM AUTHOR]

Abstract: In line with recent research efforts made to conceive energy saving protocols and algorithms and power sensitive network architectures, in this paper we propose a transmission strategy to minimize the energy consumption in a sensor network when using a localization technique based on the measurement of the strength (RSS) or the time of arrival (TOA) of the received signal. In particular, we find the transmission power and the packet transmission rate that jointly minimize the total consumed energy, while ensuring at the same time a desired accuracy in the RSS or TOA measurements. We also propose some corrections to these theoretical results to take into account the effects of shadowing and packet loss in the propagation channel. The proposed strategy is shown to be effective in realistic scenarios providing energy savings with respect to other transmission strategies, and also guaranteeing a given accuracy in the distance estimations, which will serve to guarantee a desired accuracy in the localization result. [ABSTRACT FROM AUTHOR]

This paper presents a state of the art of the estimation algorithms dealing with Out-of-Sequence (OOS) measurements for non-linearly modeled systems. The state of the art includes a critical analysis of the algorithm properties that takes into account the applicability of these techniques to autonomous mobile robot navigation based on the fusion of the measurements provided, delayed and OOS, by multiple sensors. Besides, it shows a representative example of the use of one of the most computationally efficient approaches in the localization module of the control software of a real robot (which has non-linear dynamics, and linear and non-linear sensors) and compares its performance against other approaches. The simulated results obtained with the selected OOS algorithm shows the computational requirements that each sensor of the robot imposes to it. The real experiments show how the inclusion of the selected OOS algorithm in the control software lets the robot successfully navigate in spite of receiving many OOS measurements. Finally, the comparison highlights that not only is the selected OOS algorithm among the best performing ones of the comparison, but it also has the lowest computational and memory cost. [ABSTRACT FROM AUTHOR]

TDMA protocols have attracted a lot of attention for underwater acoustic sensor networks (UWSNs), because of the unique characteristics of acoustic signal propagation such as great energy consumption in transmission, long propagation delay and long communication range. Previous TDMA protocols all allocated transmission time to nodes based on discrete time slots. This paper proposes an efficient continuous time scheduling TDMA protocol (ECS) for UWSNs, including the continuous time based and sender oriented conflict analysis model, the transmission moment allocation algorithm and the distributed topology maintenance algorithm. Simulation results confirm that ECS improves network throughput by 20% on average, compared to existing MAC protocols. [ABSTRACT FROM AUTHOR]

Recently, Wang et al. presented an efficient logistic map based block encryption system. The encryption system employs feedback ciphertext to achieve plaintext dependence of sub-keys. Unfortunately, we discovered that their scheme is unable to withstand key stream attack. To improve its security, this paper proposes a novel chaotic map based block cryptosystem. At the same time, a secure architecture for camera sensor network is constructed. The network comprises a set of inexpensive camera sensors to capture the images, a sink node equipped with sufficient computation and storage capabilities and a data processing server. The transmission security between the sink node and the server is gained by utilizing the improved cipher. Both theoretical analysis and simulation results indicate that the improved algorithm can overcome the flaws and maintain all the merits of the original cryptosystem. In addition, computational costs and efficiency of the proposed scheme are encouraging for the practical implementation in the real environment as well as camera sensor network. [ABSTRACT FROM AUTHOR]

Routing in delay tolerant mobile sensor networks (DTMSNs) is challenging due to the networks' intermittent connectivity. Most existing routing protocols for DTMSNs use simplistic random mobility models for algorithm design and performance evaluation. In the real world, however, due to the unique characteristics of human mobility, currently existing random mobility models may not work well in environments where mobile sensor units are carried (such as DTMSNs). Taking a person's social activities into consideration, in this paper, we seek to improve DTMSN routing in terms of social structure and propose an agenda based routing protocol (ARP). In ARP, humans are classified based on their agendas and data transmission is made according to sensor nodes' transmission rankings. The effectiveness of ARP is demonstrated through comprehensive simulation studies. [ABSTRACT FROM AUTHOR]

A kind of data compression algorithm for sensor networks based on suboptimal clustering and virtual landmark routing within clusters is proposed in this paper. Firstly, temporal redundancy existing in data obtained by the same node in sequential instants can be eliminated. Then sensor networks nodes will be clustered. Virtual node landmarks in clusters can be established based on cluster heads. Routing in clusters can be realized by combining a greedy algorithm and a flooding algorithm. Thirdly, a global structure tree based on cluster heads will be established. During the course of data transmissions from nodes to cluster heads and from cluster heads to sink, the spatial redundancy existing in the data will be eliminated. Only part of the raw data needs to be transmitted from nodes to sink, and all raw data can be recovered in the sink based on a compression code and part of the raw data. Consequently, node energy can be saved, largely because transmission of redundant data can be avoided. As a result the overall performance of the sensor network can obviously be improved. [ABSTRACT FROM AUTHOR]

Research on acoustic source localization is actively being conducted to enhance accuracy and coverage. However, the performance is inherently limited due to the use of expensive sensor nodes and inefficient communication methods. This paper proposes an acoustic source localization algorithm for a large area that uses low-cost sensor nodes. The proposed mechanism efficiently handles multiple acoustic sources by removing false-positive errors that arise from the different propagation ranges of radio and sound. Extensive outdoor experiments with real hardware validated that the proposed mechanism could localize four acoustic sources within a 3 m error in a 60 m by 60 m area, where conventional systems could hardly achieve similar performance. [ABSTRACT FROM AUTHOR]

The reliable operation of modern infrastructures depends on computerized systems and Supervisory Control and Data Acquisition (SCADA) systems, which are also based on the data obtained from sensor networks. The inherent limitations of the sensor devices make them extremely vulnerable to cyberwarfare/cyberterrorism attacks. In this paper, we propose a reputation system enhanced with distributed agents, based on unsupervised learning algorithms (self-organizing maps), in order to achieve fault tolerance and enhanced resistance to previously unknown attacks. This approach has been extensively simulated and compared with previous proposals. [ABSTRACT FROM AUTHOR]

In this paper, we derive feedback power control strategies for block-faded multiple access schemes with correlated sources and joint channel decoding (JCD). In particular, upon the derivation of the feasible signal-to-noise ratio (SNR) region for the considered multiple access schemes, i.e., the multidimensional SNR region where error-free communications are, in principle, possible, two feedback power control strategies are proposed: (i) a classical feedback power control strategy, which aims at equalizing all link SNRs at the access point (AP), and (ii) an innovative optimized feedback power control strategy, which tries to make the network operational point fall in the feasible SNR region at the lowest overall transmit energy consumption. These strategies will be referred to as "balanced SNR" and "unbalanced SNR," respectively. While they require, in principle, an unlimited power control range at the sources, we also propose practical versions with a limited power control range. We preliminary consider a scenario with orthogonal links and ideal feedback. Then, we analyze the robustness of the proposed power control strategies to possible non-idealities, in terms of residual multiple access interference and noisy feedback channels. Finally, we successfully apply the proposed feedback power control strategies to a limiting case of the class of considered multiple access schemes, namely a central estimating officer (CEO) scenario, where the sensors observe noisy versions of a common binary information sequence and the AP's goal is to estimate this sequence by properly fusing the soft-output information output by the JCD algorithm. [ABSTRACT FROM AUTHOR]

Localization is one of the most important subjects in Wireless Sensor Networks (WSNs). To reduce the number of beacons and adopt probabilistic methods, some particle filter-based mobile beacon-assisted localization approaches have been proposed, such as Mobile Beacon-assisted Localization (MBL), Adapting MBL (A-MBL), and the method proposed by Hang et al. Some new significant problems arise in these approaches, however. The first question is which probability distribution should be selected as the dynamic model in the prediction stage. The second is whether the unknown node adopts neighbors' observation in the update stage. The third is how to find a self-adapting mechanism to achieve more flexibility in the adapting stage. In this paper, we give the theoretical analysis and experimental evaluations to suggest which probability distribution in the dynamic model should be adopted to improve the efficiency in the prediction stage. We also give the condition for whether the unknown node should use the observations from its neighbors to improve the accuracy. Finally, we propose a Self-Adapting Mobile Beacon-assisted Localization (SA-MBL) approach to achieve more flexibility and achieve almost the same performance with A-MBL. [ABSTRACT FROM AUTHOR]

This paper presents two scheduling management schemes for wireless sensor networks, which manage the sensors by utilizing the hierarchical network structure and allocate network resources efficiently. A local criterion is used to simultaneously establish the sensing coverage and connectivity such that dynamic cluster-based sleep scheduling can be achieved. The proposed schemes are simulated and analyzed to abstract the network behaviors in a number of settings. The experimental results show that the proposed algorithms provide efficient network power control and can achieve high scalability in wireless sensor networks. [ABSTRACT FROM AUTHOR]

Several emerging areas like the Internet of Things, sensor networks, healthcare and distributed networks feature resource-constrained devices that share secure and privacy-preserving data to accomplish some goal. The majority of standard cryptographic algorithms do not fit with these constrained devices due to heavy cryptographic components. In this paper, a new block cipher, BRISK, is proposed with a block size of 32-bit. The cipher design is straightforward due to simple round operations, and these operations can be efficiently run in hardware and suitable for software. Another major concept used with this cipher is dynamism during encryption for each session; that is, instead of using the same encryption algorithm, participants use different ciphers for each session. Professor Lars R. Knudsen initially proposed dynamic encryption in 2015, where the sender picks a cipher from a large pool of ciphers to encrypt the data and send it along with the encrypted message. The receiver does not know about the encryption technique used before receiving the cipher along with the message. However, in the proposed algorithm, instead of choosing a new cipher, the process uses the same cipher for each session, but varies the cipher specifications from a given small pool, e.g., the number of rounds, cipher components, etc. Therefore, the dynamism concept is used here in a different way. [ABSTRACT FROM AUTHOR]

In a channel shared by several nodes, the scheduling algorithm is a key factor to avoiding collisions in the random access-based approach. Commonly, scheduling algorithms can be used to enhance network performance to meet certain requirements. Therefore, in this paper we propose a Delay-Aware Media Access Control (DAMAC) protocol for monitoring time-sensitive applications over multi-hop in Underwater Acoustic Sensor Networks (UASNs), which relies on the random access-based approach where each node uses Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) to determine channel status, switches nodes on and off to conserve energy, and allows concurrent transmissions to improve the underwater communication in the UASNs. In addition, DAMAC does not require any handshaking packets prior to data transmission, which helps to improve network performance in several metrics. The proposed protocol considers the long propagation delay to allow concurrent transmissions, meaning nodes are scheduled to transmit their data packets concurrently to exploit the long propagation delay between underwater nodes. The simulation results show that DAMAC protocol outperforms Aloha, BroadcastMAC, RMAC, T u -MAC, and OPMAC protocols under varying network loads in terms of energy efficiency, communication overhead, and fairness of the network by up to 65%, 45%, and 726%, respectively. [ABSTRACT FROM AUTHOR]

The effectiveness of collaboration in distributed networks, such as sensor networks and multi-agent systems, relies on nodes' ability to exchange information. The availability of various communication protocols with different technical properties opens the possibility to guarantee connectivity during a system's operation in any condition. A communication network can be represented by a graph on which connectivity can be expressed by a well-known algebraic connectivity value or Fiedler value. It is one of the most important tools used in many applications where connectivity preservation is required. In this paper, a trust-based consensus algorithm for algebraic connectivity estimation has been implemented. To guarantee the accomplishment of the global objective and the system's performance, our contributions include: (i) a novel decentralized framework for combining multiple communication channels in a resulting channel and (ii) a decentralized algebraic connectivity control law that dynamically changes the number of agents in the system during operation. The proposed algebraic connectivity control strategy has been evaluated in simulations and in a real multi-robot system using two channels with different properties and initial topologies. [ABSTRACT FROM AUTHOR]