Search

Nowadays, smartphones have become ubiquitous and one of the main communication resources for human beings. Their widespread adoption was due to the huge technological progress and to the development of multiple useful applications. Their characteristics have also experienced a substantial improvement as they now integrate multiple sensors able to convert the smartphone into a flexible and multi-purpose sensing unit. The combined use of multiple smartphones endowed with several types of sensors gives the possibility to monitor a certain area with fine spatial and temporal granularity, a procedure typically known as crowdsensing. In this paper, we propose using smartphones as environmental noise-sensing units. For this purpose, we focus our study on the sound capture and processing procedure, analyzing the impact of different noise calculation algorithms, as well as in determining their accuracy when compared to a professional noise measurement unit. We analyze different candidate algorithms using different types of smartphones, and we study the most adequate time period and sampling strategy to optimize the data-gathering process. In addition, we perform an experimental study comparing our approach with the results obtained using a professional device. Experimental results show that, if the smartphone application is well tuned, it is possible to measure noise levels with a accuracy degree comparable to professional devices for the entire dynamic range typically supported by microphones embedded in smartphones, i.e., 35-95 dB. [ABSTRACT FROM AUTHOR]

The paper considers the connected target coverage (CTC) problem in wireless heterogeneous sensor networks (WHSNs) with multiple sensing units, termed MU-CTC problem. MU-CTC problem can be reduced to a connected set cover problem and further formulated as an integer linear programming (ILP) problem. However, the ILP problem is an NP-complete problem. Therefore, two distributed heuristic schemes, REFS (remaining energy first scheme) and EEFS (energy efficiency first scheme), are proposed. In REFS, each sensor considers its remaining energy and its neighbors' decisions to enable its sensing units and communication unit such that all targets can be covered for the required attributes and the sensed data can be delivered to the sink. The advantages of REFS are its simplicity and reduced communication overhead. However, to utilize sensors' energy efficiently, EEFS is proposed. A sensor in EEFS considers its contribution to the coverage and the connectivity to make a better decision. To our best knowledge, this paper is the first to consider target coverage and connectivity jointly for WHSNs with multiple sensing units. Simulation results show that REFS and EEFS can both prolong the network lifetime effectively. EEFS outperforms REFS in network lifetime, but REFS is simpler. [ABSTRACT FROM AUTHOR]

Cybersecurity is becoming an increasingly important aspect in ensuring maritime data protection and operational continuity. Ships, ports, surveillance and navigation systems, industrial technology, cargo, and logistics systems all contribute to a complex maritime environment with a significant cyberattack surface. To that aim, a wide range of cyberattacks in the maritime domain are possible, with the potential to infect vulnerable information and communication systems, compromising safety and security. The use of navigation and surveillance systems, which are considered as part of the maritime OT sensors, can improve maritime cyber situational awareness. This survey critically investigates whether the fusion of OT data, which are used to provide maritime situational awareness, may also improve the ability to detect cyberincidents in real time or near-real time. It includes a thorough analysis of the relevant literature, emphasizing RF but also other sensors, and data fusion approaches that can help improve maritime cybersecurity. [ABSTRACT FROM AUTHOR]

Spectrum sensing technology plays an increasingly important role in cognitive radio networks. Consequently, several spectrum sensing algorithms have been proposed in the literature. In this paper, we present a new spectrum sensing algorithm "Differential Characteristics-Based OFDM (DC-OFDM)" for detecting OFDM signal on account of differential characteristics. We put the primary value on channel gain θ around zero to detect the presence of primary user. Furthermore, utilizing the same method of differential operation, we improve two traditional OFDM sensing algorithms (cyclic prefix and pilot tones detecting algorithms), and propose a "Differential Characteristics-Based Cyclic Prefix (DC-CP)" detector and a "Differential Characteristics-Based Pilot Tones (DC-PT)" detector, respectively. DC-CP detector is based on auto-correlation vector to sense the spectrum, while the DC-PT detector takes the frequency-domain cross-correlation of PT as the test statistic to detect the primary user. Moreover, the distributions of the test statistics of the three proposed methods have been derived. Simulation results illustrate that all of the three proposed methods can achieve good performance under low signal to noise ratio (SNR) with the presence of timing delay. Specifically, the DC-OFDM detector gets the best performance among the presented detectors. Moreover, both of the DC-CP and DC-PT detector achieve significant improvements compared with their corresponding original detectors. [ABSTRACT FROM AUTHOR]

Emergency navigation systems for buildings and other built environments, such as sport arenas or shopping centres, typically rely on simple sensor networks to detect emergencies and, then, provide automatic signs to direct the evacuees. The major drawbacks of such static wireless sensor network (WSN)-based emergency navigation systems are the very limited computing capacity, which makes adaptivity very difficult, and the restricted battery power, due to the low cost of sensor nodes for unattended operation. If static wireless sensor networks and cloud-computing can be integrated, then intensive computations that are needed to determine optimal evacuation routes in the presence of time-varying hazards can be offloaded to the cloud, but the disadvantages of limited battery life-time at the client side, as well as the high likelihood of system malfunction during an emergency still remain. By making use of the powerful sensing ability of smart phones, which are increasingly ubiquitous, this paper presents a cloud-enabled indoor emergency navigation framework to direct evacuees in a coordinated fashion and to improve the reliability and resilience for both communication and localization. By combining social potential fields (SPF) and a cognitive packet network (CPN)-based algorithm, evacuees are guided to exits in dynamic loose clusters. Rather than relying on a conventional telecommunications infrastructure, we suggest an ad hoc cognitive packet network (AHCPN)-based protocol to adaptively search optimal communication routes between portable devices and the network egress nodes that provide access to cloud servers, in a manner that spares the remaining battery power of smart phones and minimizes the time latency. Experimental results through detailed simulations indicate that smart human motion and smart network management can increase the survival rate of evacuees and reduce the number of drained smart phones in an evacuation process. [ABSTRACT FROM AUTHOR]

Signal acquisition and sensing in underwater systems and applications is typically a challenging issue due to the small signal strength within the background noise. Here, we present a ring vector sensor communication receiver that can significantly improve signal acquisition, by utilizing the underwater acoustic vector field components, compared to the scalar component. The vector sensor receiver is a multichannel receiver that measures particle velocities, which are vector components of the underwater acoustic field, in addition to the scalar field component. According to the combination of our measured experimental data with our signal acquisition performance analysis, the introduced ring vector sensor receiver exhibits higher signal acquisition probabilities for the vector components compared to the scalar component. This can be attributed to certain characteristics of the vector field components. Another advantage of this multichannel receiver is that combining all of its channels can further increase the signal acquisition and packet detection probability in underwater communication systems compared to a single-channel approach. [ABSTRACT FROM AUTHOR]

In time-critical wireless sensor network (WSN) applications, a high degree of reliability is commonly required. A dynamical jumping real-time fault-tolerant routing protocol (DMRF) is proposed in this paper. Each node utilizes the remaining transmission time of the data packets and the state of the forwarding candidate node set to dynamically choose the next hop. Once node failure, network congestion or void region occurs, the transmission mode will switch to jumping transmission mode, which can reduce the transmission time delay, guaranteeing the data packets to be sent to the destination node within the specified time limit. By using feedback mechanism, each node dynamically adjusts the jumping probabilities to increase the ratio of successful transmission. Simulation results show that DMRF can not only efficiently reduce the effects of failure nodes, congestion and void region, but also yield higher ratio of successful transmission, smaller transmission delay and reduced number of control packets. [ABSTRACT FROM AUTHOR]

A significant technological transformation has recently occurred in the agriculture sector. Precision agriculture is one among those transformations that largely focus on the acquisition of the sensor data, identifying the insights, and summarizing the information for better decision-making that would enhance the resource usage efficiency, crop yield, and substantial quality of the yield resulting in better profitability, and sustainability of agricultural output. For continuous crop monitoring, the farmlands are connected with various sensors that must be robust in data acquisition and processing. The legibility of such sensors is an exceptionally challenging task, which needs energy-efficient models for handling the lifetime of the sensors. In the current study, the energy-aware software-defined network for precisely selecting the cluster head for communication with the base station and the neighboring low-energy sensors. The cluster head is initially chosen according to energy consumption, data transmission consumption, proximity measures, and latency measures. In the subsequent rounds, the node indexes are updated to select the optimal cluster head. The cluster fitness is assessed in each round to retain the cluster in the subsequent rounds. The network model's performance is assessed against network lifetime, throughput, and network processing latency. The experimental findings presented here show that the model outperforms the alternatives presented in this study. [ABSTRACT FROM AUTHOR]

Unmanned traffic management (UTM) systems will become a key enabler to the future drone market ecosystem, enabling the safe concurrent operation of both manned and unmanned aircrafts. Currently, these systems are usually tested by performing real scenarios that are costly, limited, hardly scalable, and poorly repeatable. As a solution, in this paper we propose an agent-based simulation platform, implemented through a micro service architecture, which may simulate UTM information sources, such as flight plans, telemetry messages, or tracks from a surveillance network. The final objective of this simulator is to use these information streams to perform a system-level evaluation of UTM systems both in the pre-flight and in-flight stages. The proposed platform, with a focus on simulation of communications and sensors, allows to model UTM actors' behaviors and their interactions. In addition, it also considers the manual definition of events to simulate unexpected behaviors/events (contingencies), such as communications failures or pilots' actions. In order to validate our architecture, we implemented a simulator that considers the following actors: drones, pilots, ground control stations, surveillance networks, and communications networks. This platform enables the simulation of the drone trajectory and control, the C2 (command and control) link, drone detection by surveillance sensors, and the communication of all agents by means of a mobile communications network. Our results show that it is possible to truthfully recreate complex scenarios using this simulator, mitigating the disadvantages of real testbeds. [ABSTRACT FROM AUTHOR]

The normal operations of radar systems and communication systems under the condition of spectrum coexistence are facing a huge challenge. This paper uses game theory to study power allocation problems between multistatic multiple-input multiple-output (MIMO) radars and downlink communication. In the case of spectrum coexistence, radars, base station (BS) and multi-user (MU) have the working state of receiving and transmitting signals, which can cause unnecessary interferences to different systems. Therefore, when they work together, they should try to suppress mutual interferences. Firstly, the signal from BS is considered as interference when radar detects and tracks targets. A supermodular power allocation game (PAG) model is established and the existence and uniqueness of the Nash equilibrium (NE) in this game are proved. In addition, the power allocation problem from BS to MU is also analyzed, and two Stackelberg PAG models are constructed. It is proved that the NE of each game exists and is unique. Simultaneously, two Stackelberg power allocation iterative algorithms converge to the NEs. Finally, numerical results verify the convergence of the proposed PAG algorithms. [ABSTRACT FROM AUTHOR]

In recent years there has been an increasing need for miniature, low-cost, commercially accessible, and user-friendly sensor solutions for wireless body area networks (WBAN), which has led to the adoption of new physical communication interfaces providing distinctive advantages over traditional wireless technologies. Ultra-wideband (UWB) and intrabody communication (IBC) have been the subject of intensive research in recent years due to their promising characteristics as means for short-range, low-power, and low-data-rate wireless interfaces for interconnection of various sensors and devices placed on, inside, or in the close vicinity of the human body. The need for safe and standardized solutions has resulted in the development of two relevant standards, IEEE 802.15.4 (for UWB) and IEEE 802.15.6 (for UWB and IBC), respectively. This paper presents an in-depth overview of recent studies and advances in the field of application of UWB and IBC technologies for wireless body sensor communication systems. [ABSTRACT FROM AUTHOR]

The use of wireless technologies in the field of agriculture, or so-called smart or precision agriculture, is considered as one of the main efforts applied nowadays to multiply the food production on earth. However, wireless sensor network (WSN) technology is still at its early development stage and its application in agriculture and food industry is still rare due to the lack of farmers' awareness and outreach about the matter. This paper presents a new agro-sensor named AgriLogger with an aim to collect, store for long periods and transmit agrometeorological data represented by temperature and relative humidity in remote areas hard to reach and not served by telecommunication networks. The sensor exhibits long battery life, in the order of 10 years, thanks to low consumption technologies and to hardware sleep/wake up approach. It can be remotely placed on preselected sites through a customized drone. This latter, equipped with a dedicated payload, can then return on the sites where sensors have been placed, and, while hovering, wakes up the single devices and uploads their collected data through local wireless network. Field tests have demonstrated that the sensor, after being placed manually in two different positions, inside and outside a vineyard canopy, is able to collect and store successfully agrometeorological data like temperature and relative humidity. Moreover, the use of a drone potentially allows the collection of data from remote areas and, therefore, is able to provide a periodical monitoring of agro-ecological conditions. [ABSTRACT FROM AUTHOR]

Deep learning (DL) is a powerful technique which has achieved great success in many applications. However, its usage in communication systems has not been well explored. This paper investigates algorithms for multi-signals detection and modulation classification, which are significant in many communication systems. In this work, a DL framework for multi-signals detection and modulation recognition is proposed. Compared to some existing methods, the signal modulation format, center frequency, and start-stop time can be obtained from the proposed scheme. Furthermore, two types of networks are built: (1) Single shot multibox detector (SSD) networks for signal detection and (2) multi-inputs convolutional neural networks (CNNs) for modulation recognition. Additionally, the importance of signal representation to different tasks is investigated. Experimental results demonstrate that the DL framework is capable of detecting and recognizing signals. And compared to the traditional methods and other deep network techniques, the current built DL framework can achieve better performance. [ABSTRACT FROM AUTHOR]

In this article, an innovative approach for magnetic data communication is presented. For this purpose, the receiver coil of a conventional magneto-inductive communication system is replaced by a high-sensitivity wideband magnetic field sensor. The results show decisive advantages offered by sensitive magnetic field sensors, including a higher communication range for small receiver units. This approach supports numerous mobile applications where receiver size is limited, possibly in conjunction with multiple detectors. Numerical results are supported by a prototype implementation employing an anisotropic magneto-resistive sensor. [ABSTRACT FROM AUTHOR]