Search

The reliability of rolling element bearings has been substantially undermined by the presence of parasitic and stray currents. Electrical discharges can occur between the raceway and the rolling elements and it has been previously shown that these discharges at relatively high current density levels can result in fluting and corrugation damages. Recent publications have shown that for a bearing operating at specific mechanical conditions (load, temperature, speed, and slip), electrical discharges at low current densities (<1 mA/mm2) may substantially reduce bearing life due to the formation of white etching cracks (WECs) in bearing components, often in junction with lubricants. To date, limited studies have been conducted to understand the electrical discharges at relatively low current densities (<1 mA/mm2), partially due to the lack of robust techniques for in-situ quantification of discharges. This study, using voltage measurement and electrostatic sensors, investigates discharges in an oil-lubricated steel-steel rolling contact on a TE74 twin-roller machine under a wide range of electrical and mechanical conditions. The results show that the discharges events between the rollers are influenced by temperature, load, and speed due to changes in the lubricant film thickness and contact area, and the sensors are effective in detecting, characterizing and quantifying the discharges. Hence, these sensors can be effectively used to study the influence of discharges on WEC formation. [ABSTRACT FROM AUTHOR]

The following study presents an in situ sensor system which can measure the temperature change of rolling contacts for heavy duty during fluid as well as mixed friction. This thin-film sensor was optimized with regard to its size, spatial resolution, and wear resistance. Extensive tests were carried out with a two-disk test rig and the data of the temperature change were presented. The results show the complex processes within a rolling contact and the strongly interaction of pressure, friction, and temperature development within the contact zone. Due to the detailed sensor and disk characterization, the data are suitable for comparing calculation methods. [ABSTRACT FROM AUTHOR]