Search

With the increasing number of urban vehicles, as well as the current situation of non-intelligent traffic control systems, spatiotemporal non-uniform traffic resource occupation, and limited traffic planning and design, existing urban traffic planning methods cannot effectively solve problems such as frequent traffic congestion and uncontrollable commuting time for residents. In order to solve the above problems, this paper first constructs a multi-queue, multi-server queuing model based on the server vacation and a multi-hop cascaded queuing model from the perspective of local intersections and global commuting paths. We analyze the theoretical changes in passage delay costs at local intersections and on global commuting paths as a function of traffic flow and the random duration of traffic signals. On this basis, this article proposes a collaborative intelligent traffic planning algorithm based on artificial intelligence, which utilizes traffic sensors to dynamically perceive traffic congestion status and collaboratively plans the optimal duration of traffic signals and the optimal driving path of vehicles from both local and global perspectives, thereby maximizing the on-time arrival ratio of vehicles while ensuring the required commuting delay. The simulation results show that the proposed method can increase the on-time arrival ratio of vehicles by at least 20% compared to contrast methods while meeting the requirements relating to commuting delays. This verifies that our method can provide support for the improvement in efficiency in future Internet of vehicles. [ABSTRACT FROM AUTHOR]

As urban areas continue to expand, traffic congestion has emerged as a significant challenge impacting urban governance and economic development. Frequent regional traffic congestion has become a primary factor hindering urban economic growth and social activities, necessitating improved regional traffic management. Addressing regional traffic optimization and control methods based on the characteristics of regional congestion has become a crucial and complex issue in the field of traffic management and control research. This paper focuses on the macroscopic fundamental diagram (MFD) and aims to tackle the control problem without relying on traffic determination information. To address this, we introduce the Q-learning (QL) algorithm in reinforcement learning and the Deep Deterministic Policy Gradient (DDPG) algorithm in deep reinforcement learning. Subsequently, we propose the MFD-QL perimeter control model and the MFD-DDPG perimeter control model. We conduct numerical analysis and simulation experiments to verify the effectiveness of the MFD-QL and MFD-DDPG algorithms. The experimental results show that the algorithms converge rapidly to a stable state and achieve superior control effects in optimizing regional perimeter control. [ABSTRACT FROM AUTHOR]

Traffic flow prediction is one of the most important tasks of the Intelligent Transportation Systems (ITSs) for traffic management, and it is also a challenging task affected by many complex factors, such as weather and time. Many cities adopt efficient traffic prediction methods to control traffic congestion. However, most of the existing methods of traffic prediction focus on urban road scenarios, neglecting the complexity of multivariate auxiliary information in highways. Moreover, these methods have difficulty explaining the prediction results based only on the historical traffic flow sequence. To tackle these problems, we propose a novel traffic prediction model, namely Multi-variate and Multi-horizon prediction based on Long Short-Term Memory (MMLSTM). MMLSTM can effectively incorporate auxiliary information, such as weather and time, based on a strategy of multi-horizon time spans to improve the prediction performance. Specifically, we first exploit a multi-horizon bidirectional LSTM model for fusing the multivariate auxiliary information in different time spans. Then, we combine an attention mechanism and multi-layer perceptron to conduct the traffic prediction. Furthermore, we can use the information of multivariate (weather and time) to provide interpretability to manage the model. Comprehensive experiments are conducted on Hangst and Metr-la datasets, and MMLSTM achieves better performance than baselines on traffic prediction tasks. [ABSTRACT FROM AUTHOR]

As technology continues to develop, computer vision (CV) applications are becoming increasingly widespread in the intelligent transportation systems (ITS) context. These applications are developed to improve the efficiency of transportation systems, increase their level of intelligence, and enhance traffic safety. Advances in CV play an important role in solving problems in the fields of traffic monitoring and control, incident detection and management, road usage pricing, and road condition monitoring, among many others, by providing more effective methods. This survey examines CV applications in the literature, the machine learning and deep learning methods used in ITS applications, the applicability of computer vision applications in ITS contexts, the advantages these technologies offer and the difficulties they present, and future research areas and trends, with the goal of increasing the effectiveness, efficiency, and safety level of ITS. The present review, which brings together research from various sources, aims to show how computer vision techniques can help transportation systems to become smarter by presenting a holistic picture of the literature on different CV applications in the ITS context. [ABSTRACT FROM AUTHOR]

Traffic congestion is an important problem faced by Intelligent Transportation Systems (ITS), requiring models that allow predicting the impact of different solutions on urban traffic flow. Such an approach typically requires the use of simulations, which should be as realistic as possible. However, achieving high degrees of realism can be complex when the actual traffic patterns, defined through an Origin/Destination (O-D) matrix for the vehicles in a city, remain unknown. Thus, the main contribution of this paper is a heuristic for improving traffic congestion modeling. In particular, we propose a procedure that, starting from real induction loop measurements made available by traffic authorities, iteratively refines the output of DFROUTER, which is a module provided by the SUMO (Simulation of Urban MObility) tool. This way, it is able to generate an O-D matrix for traffic that resembles the real traffic distribution and that can be directly imported by SUMO. We apply our technique to the city of Valencia, and we then compare the obtained results against other existing traffic mobility data for the cities of Cologne (Germany) and Bologna (Italy), thereby validating our approach. We also use our technique to determine what degree of congestion is expectable if certain conditions cause additional traffic to circulate in the city, adopting both a uniform pattern and a hotspot-based pattern for traffic injection to demonstrate how to regulate the overall number of vehicles in the city. This study allows evaluating the impact of vehicle flow changes on the overall traffic congestion levels. [ABSTRACT FROM AUTHOR]

The jam flow condition is one of the main traffic states in traffic flow theory and the most difficult state for sectional traffic information acquisition. Since traffic information acquisition is the basis for the application of an intelligent transportation system, research on traffic vehicle counting methods for the jam flow conditions has been worthwhile. A low-cost and energy-efficient type of multi-function wireless traffic magnetic sensor was designed and developed. Several advantages of the traffic magnetic sensor are that it is suitable for large-scale deployment and time-sustainable detection for traffic information acquisition. Based on the traffic magnetic sensor, a basic vehicle detection algorithm (DWVDA) with less computational complexity was introduced for vehicle counting in low traffic volume conditions. To improve the detection performance in jam flow conditions with a "tailgating effect" between front vehicles and rear vehicles, an improved vehicle detection algorithm (SA-DWVDA) was proposed and applied in field traffic environments. By deploying traffic magnetic sensor nodes in field traffic scenarios, two field experiments were conducted to test and verify the DWVDA and the SA-DWVDA algorithms. The experimental results have shown that both DWVDA and the SA-DWVDA algorithms yield a satisfactory performance in low traffic volume conditions (scenario I) and both of their mean absolute percent errors are less than 1% in this scenario. However, for jam flow conditions with heavy traffic volumes (scenario II), the SA-DWVDA was proven to achieve better results, and the mean absolute percent error of the SA-DWVDA is 2.54% with corresponding results of the DWVDA 7.07%. The results conclude that the proposed SA-DWVDA can implement efficient and accurate vehicle detection in jam flow conditions and can be employed in field traffic environments. [ABSTRACT FROM AUTHOR]

The escalation of traffic congestion in urban cities has urged many countries to use intelligent transportation system (ITS) centers to collect historical traffic sensor data from multiple heterogeneous sources. By analyzing historical traffic data, we can obtain valuable insights into traffic behavior. Many existing applications have been proposed with limited analysis results because of the inability to cope with several types of analytical queries. In this paper, we propose the QET (querying and extracting timeline information) system—a novel analytical query processing method based on a timeline model for road traffic sensor data. To address query performance, we build a TQ-index (timeline query-index) that exploits spatio-temporal features of timeline modeling. We also propose an intuitive timeline visualization method to display congestion events obtained from specified query parameters. In addition, we demonstrate the benefit of our system through a performance evaluation using a Busan ITS dataset and a Seattle freeway dataset. [ABSTRACT FROM AUTHOR]

As society has developed, the number of vehicles has increased and road conditions have become complicated, increasing the risk of crashes. Therefore, a service that provides safe vehicle control and various types of information to the driver is urgently needed. In this study, we designed and implemented a real-time traffic information system and a smart camera device for smart driver assistance systems. We selected a commercial device for the smart driver assistance systems, and applied a computer vision algorithm to perform image recognition. For application to the dynamic region of interest, dynamic frame skip methods were implemented to perform parallel processing in order to enable real-time operation. In addition, we designed and implemented a model to estimate congestion by analyzing traffic information. The performance of the proposed method was evaluated using images of a real road environment. We found that the processing time improved by 15.4 times when all the proposed methods were applied in the application. Further, we found experimentally that there was little or no change in the recognition accuracy when the proposed method was applied. Using the traffic congestion estimation model, we also found that the average error rate of the proposed model was 5.3%. [ABSTRACT FROM AUTHOR]

The prevention of accidents is one of the most important goals of ad hoc networks in smart cities. When an accident happens, dynamic sensors (e.g., citizens with smart phones or tablets, smart vehicles and buses, etc.) could shoot a video clip of the accident and send it through the ad hoc network. With a video message, the level of seriousness of the accident could be much better evaluated by the authorities (e.g., health care units, police and ambulance drivers) rather than with just a simple text message. Besides, other citizens would be rapidly aware of the incident. In this way, smart dynamic sensors could participate in reporting a situation in the city using the ad hoc network so it would be possible to have a quick reaction warning citizens and emergency units. The deployment of an efficient routing protocol to manage video-warning messages in mobile Ad hoc Networks (MANETs) has important benefits by allowing a fast warning of the incident, which potentially can save lives. To contribute with this goal, we propose a multipath routing protocol to provide video-warning messages in MANETs using a novel game-theoretical approach. As a base for our work, we start from our previous work, where a 2-players game-theoretical routing protocol was proposed to provide video-streaming services over MANETs. In this article, we further generalize the analysis made for a general number of N players in the MANET. Simulations have been carried out to show the benefits of our proposal, taking into account the mobility of the nodes and the presence of interfering traffic.Finally, we also have tested our approach in a vehicular ad hoc network as an incipient start point to develop a novel proposal specifically designed for VANETs. [ABSTRACT FROM AUTHOR]

Noise maps and action plans represent the main tools in the fight against citizens' exposure to noise, especially that produced by road traffic. The present and the future in smart traffic control is represented by Intelligent Transportation Systems (ITS), which however have not yet been sufficiently studied as possible noise-mitigation tools. However, ITS dedicated to traffic control rely on models and input data that are like those required for road traffic noise mapping. The present work developed an instrumentation based on low-cost cameras and a vehicle recognition and counting methodology using modern machine learning techniques, compliant with the requirements of the CNOSSOS-EU noise assessment model. The instrumentation and methodology could be integrated with existing ITS for traffic control in order to design an integrated method, which could also provide updated data over time for noise maps and action plans. The test was carried out as a follow up of the L.I.S.T. Port project, where an ITS was installed for road traffic management in the Italian port city of Piombino. The acoustic efficacy of the installation is evaluated by looking at the difference in the acoustic impact on the population before and after the ITS installation by means of the distribution of noise exposure, the evaluation of Gden and Gnight, and the calculation of the number of highly annoyed and sleep-disturbed citizens. Finally, it is shown how the ITS system represents a valid solution to be integrated with targeted and more specific sound mitigation, such as the laying of low-emission asphalts. [ABSTRACT FROM AUTHOR]

To provide high-quality streaming services in device-to-device (D2D) communications, performance parameters such as encoding rate, decoding rate, and flow rate should be detected and monitored. The proposed algorithm provides a method to detect time streaming for traffic flows in D2D communications, and a sequence to detect rate imbalance. This paper proposes a new FS-CDA (flow sensing-based congestion detecting algorithm) to prevent high congestion rates and assist an optimized D2D streaming service in 5G-based wireless mobile networks. The proposed algorithm detects and controls flow imbalance for streaming segments during D2D communications, and it includes operations such as transmission rate monitoring, rate adjustment functions, and underflow and overflow sensing for these operations. The paper aims to effectively control traffic flow rates caused by adjacent channel bandwidth, high bit rate error, and heterogeneous radio interference, and to enhance the performance of D2D streaming services by performing such operations. The proposed algorithm for D2D streaming services is measured by deriving the individual weight of certain versions of a streaming flow. Based on the given operations, the simulation results indicated that the proposed algorithm has better performance with respect to average congestion control ratio, PSNR, and average throughput than other methods. [ABSTRACT FROM AUTHOR]

Due to the limitations of data transfer technologies, existing studies on urban traffic control mainly focused on isolated dimension control such as traffic signal control or vehicle route guidance to alleviate traffic congestion. However, in real traffic, the distribution of traffic flow is the result of multiple dimensions whose future state is influenced by each dimension's decisions. Presently, the development of the Internet of Vehicles enables an integrated intelligent transportation system. This paper proposes an integrated intelligent transportation model that can optimize predictive traffic signal control and predictive vehicle route guidance simultaneously to alleviate traffic congestion based on their feedback regulation relationship. The challenges of this model lie in that the formulation of the nonlinear feedback relationship between various dimensions is hard to describe and the design of a corresponding solving algorithm that can obtain Pareto optimality for multi-dimension control is complex. In the integrated model, we introduce two medium variables—predictive traffic flow and the predictive waiting time—to two-way link the traffic signal control and vehicle route guidance. Inspired by game theory, an asymmetric information exchange framework-based updating distributed algorithm is designed to solve the integrated model. Finally, an experimental study in two typical traffic scenarios shows that more than 73.33% of the considered cases adopting the integrated model achieve Pareto optimality. [ABSTRACT FROM AUTHOR]

Timely and accurate traffic speed predictions are an important part of the Intelligent Transportation System (ITS), which provides data support for traffic control and guidance. The speed evolution process is closely related to the topological structure of the road networks and has complex temporal and spatial dependence, in addition to being affected by various external factors. In this study, we propose a new Speed Prediction of Traffic Model Network (SPTMN). The model is largely based on a Temporal Convolution Network (TCN) and a Graph Convolution Network (GCN). The improved TCN is used to complete the extraction of time dimension and local spatial dimension features, and the topological relationship between road nodes is extracted by GCN, to accomplish global spatial dimension feature extraction. Finally, both spatial and temporal features are combined with road parameters to achieve accurate short-term traffic speed predictions. The experimental results show that the SPTMN model obtains the best performance under various road conditions, and compared with eight baseline methods, the prediction error is reduced by at least 8%. Moreover, the SPTMN model has high effectiveness and stability. [ABSTRACT FROM AUTHOR]

Traffic congestion experience in urban areas has negative impact on our daily lives by consuming our time and resources. Intelligent Transportation Systems can provide the necessary infrastructure to mitigate such challenges. In this paper, we propose a novel and scalable solution to model, store and control traffic data based on range query data structures (K-ary Interval Tree and K-ary Entry Point Tree) which allows data representation and handling in a way that better predicts and avoids traffic congestion in urban areas. Our experiments, validation scenarios, performance measurements and solution assessment were done on Brooklyn, New York traffic congestion simulation scenario and shown the validity, reliability, performance and scalability of the proposed solution in terms of time spent in traffic, run-time and memory usage. The experiments on the proposed data structures simulated up to 10,000 vehicles having microseconds time to access traffic information and below 1.5 s for congestion free route generation in complex scenarios. To the best of our knowledge, this is the first scalable approach that can be used to predict urban traffic and avoid congestion through range query data structure traffic modelling. [ABSTRACT FROM AUTHOR]

With the advanced development of the intelligent transportation system, vehicular ad hoc networks have been observed as an excellent technology for the development of intelligent traffic management in smart cities. Recently, researchers and industries have paid great attention to the smart road-tolling system. However, it is still a challenging task to ensure geographical location privacy of vehicles and prevent improper behavior of drivers at the same time. In this paper, a reliable road-tolling system with trustworthiness evaluation is proposed, which guarantees that vehicle location privacy is secure and prevents malicious vehicles from tolling violations at the same time. Vehicle route privacy information is encrypted and uploaded to nearby roadside units, which then forward it to the traffic control center for tolling. The traffic control center can compare data collected by roadside units and video surveillance cameras to analyze whether malicious vehicles have behaved incorrectly. Moreover, a trustworthiness evaluation is applied to comprehensively evaluate the multiple attributes of the vehicle to prevent improper behavior. Finally, security analysis and experimental simulation results show that the proposed scheme has better robustness compared with existing approaches. [ABSTRACT FROM AUTHOR]

The use of real-time vehicle detection and classification systems is essential for the accurate management of traffic and road infrastructure. Over time, diverse systems have been proposed for it, such as the widely known magnetic loops or microwave radars. However, these types of sensors do not offer all the information currently required for exhaustive and comprehensive traffic control. Thus, this paper presents the design, implementation, and configuration of laser systems to obtain 3D profiles of vehicles, which collect more precise information about the state of the roads. Nevertheless, to obtain reliable information on vehicle traffic by means of these systems, it is fundamental to correctly carry out a series of preliminary steps: choose the most suitable type of laser, select its configuration properly, determine the optimal location, and process the information provided accurately. Therefore, this paper details a series of criteria to help make these crucial and difficult decisions. Furthermore, following these guidelines, a complete laser system implemented for vehicle detection and classification is presented as result, which is characterized by its versatility and the ability to control up to four lanes in real time. [ABSTRACT FROM AUTHOR]

Minimizing human intervention in engines, such as traffic lights, through automatic applications and sensors has been the focus of many studies. Thus, Deep Learning (DL) algorithms have been studied for traffic signs and vehicle identification in an urban traffic context. However, there is a lack of priority vehicle classification algorithms with high accuracy, fast processing, and a lightweight solution. For filling those gaps, a vehicle detection system is proposed, which is integrated with an intelligent traffic light. Thus, this work proposes (1) a novel vehicle detection model named Priority Vehicle Image Detection Network (PVIDNet), based on Y O L O V 3 , (2) a lightweight design strategy for the PVIDNet model using an activation function to decrease the execution time of the proposed model, (3) a traffic control algorithm based on the Brazilian Traffic Code, and (4) a database containing Brazilian vehicle images. The effectiveness of the proposed solutions were evaluated using the Simulation of Urban MObility (SUMO) tool. Results show that PVIDNet reached an accuracy higher than 0.95, and the waiting time of priority vehicles was reduced by up to 50%, demonstrating the effectiveness of the proposed solution. [ABSTRACT FROM AUTHOR]

With smart city infrastructures growing, the Internet of Things (IoT) has been widely used in the intelligent transportation systems (ITS). The traditional adaptive traffic signal control method based on reinforcement learning (RL) has expanded from one intersection to multiple intersections. In this paper, we propose a multi-agent auto communication (MAAC) algorithm, which is an innovative adaptive global traffic light control method based on multi-agent reinforcement learning (MARL) and an auto communication protocol in edge computing architecture. The MAAC algorithm combines multi-agent auto communication protocol with MARL, allowing an agent to communicate the learned strategies with others for achieving global optimization in traffic signal control. In addition, we present a practicable edge computing architecture for industrial deployment on IoT, considering the limitations of the capabilities of network transmission bandwidth. We demonstrate that our algorithm outperforms other methods over 17% in experiments in a real traffic simulation environment. [ABSTRACT FROM AUTHOR]

The Routing Protocol for Low power and lossy networks (RPL) has been introduced as the de-facto routing protocol for the Industrial Internet of Things (IIoT). In heavy load scenarios, particular parent nodes are likely prone to congestion, which in turn degrades the network performance, in terms of packet delivery and delay. Moreover, there is no explicit strategy in RPL to prioritize the transmission of different traffic types in heterogeneous 6TiSCH networks, each according to its criticality. In this paper, we address the aforementioned issues by introducing a congestion control and service differentiation strategies to support heterogeneous 6TiSCH networks in IIoT applications. First, we introduce a congestion control mechanism to achieve load balancing under heavy traffic scenarios. The congestion is detected through monitoring and sharing the status of the queue backlog among neighbor nodes. We define a new routing metric that considers the queue occupancy when selecting the new parent node in congestion situations. In addition, we design a multi-queue model to provide prioritized data transmission for critical data over the non-critical ones. Each traffic type is placed in a separate queue and scheduled for transmission based on the assigned queue priority, where critical data are always transmitted first. The performance of the proposed work is evaluated through extensive simulations and compared with existing work to demonstrate its effectiveness. The results show that our proposal achieves improved packet delivery and low queue losses under heavy load scenarios, as well as improved delay performance of critical traffic. [ABSTRACT FROM AUTHOR]

Various traffic-sensing technologies have been employed to facilitate traffic control. Due to certain factors, e.g., malfunctioning devices and artificial mistakes, missing values typically occur in the Intelligent Transportation System (ITS) sensing datasets, resulting in a decrease in the data quality. In this study, an integrated imputation algorithm based on fuzzy C-means (FCM) and the genetic algorithm (GA) is proposed to improve the accuracy of the estimated values. The GA is applied to optimize the parameter of the membership degree and the number of cluster centroids in the FCM model. An experimental test of the taxi global positioning system (GPS) data in Manhattan, New York City, is employed to demonstrate the effectiveness of the integrated imputation approach. Three evaluation criteria, the root mean squared error (RMSE), correlation coefficient (R), and relative accuracy (RA), are used to verify the experimental results. Under the ±5% and ±10% thresholds, the average RAs obtained by the integrated imputation method are 0.576 and 0.785, which remain the highest among different methods, indicating that the integrated imputation method outperforms the history imputation method and the conventional FCM method. On the other hand, the clustering imputation performance with the Euclidean distance is better than that with the Manhattan distance. Thus, our proposed integrated imputation method can be employed to estimate the missing values in the daily traffic management. [ABSTRACT FROM AUTHOR]

Urban traffic routing is deemed to be a significant challenge in intelligent transportation systems. Existing implementations suffer from several intrinsic issues such as scalability in centralized systems, unnecessary complexity of mechanisms and communication in distributed systems, and lack of privacy. These imply force intensive computational tasks in the traffic control center, continuous communication in real-time with involved stakeholders which require drivers to reveal their location, origin, and destination of their trips. In this paper we present an innovative urban traffic routing framework and reference architecture (multimap traffic control architecture, MuTraff), which is based on the strategical generation and distribution of a set of traffic network maps (traffic weighted multimaps, TWM) to vehicle categories or fleets. Each map in a TWM map set has the same topology but a different distribution of link weights, which are computed by considering policies and constraints that may apply to different vehicle groups. MuTraff delivers a traffic management system (TMS), where a traffic control center generates and distributes maps, while routing computation is performed at the vehicles. We show how this balance between generation, distribution, and routing computation improves scalability, eases communication complexities, and solves former privacy issues. Our study presents case studies in a real city environment for (a) global congestion management using random maps; (b) congestion control on road incidents; and c) emergency fleets routing. We show that MuTraff is a promising foundation framework that is easy to deploy, and is compatible with other existing TMS frameworks. [ABSTRACT FROM AUTHOR]

Automatic vehicle detection and counting are considered vital in improving traffic control and management. This work presents an effective algorithm for vehicle detection and counting in complex traffic scenes by combining both convolution neural network (CNN) and the optical flow feature tracking-based methods. In this algorithm, both the detection and tracking procedures have been linked together to get robust feature points that are updated regularly every fixed number of frames. The proposed algorithm detects moving vehicles based on a background subtraction method using CNN. Then, the vehicle's robust features are refined and clustered by motion feature points analysis using a combined technique between KLT tracker and K-means clustering. Finally, an efficient strategy is presented using the detected and tracked points information to assign each vehicle label with its corresponding one in the vehicle's trajectories and truly counted it. The proposed method is evaluated on videos representing challenging environments, and the experimental results showed an average detection and counting precision of 96.3% and 96.8%, respectively, which outperforms other existing approaches. [ABSTRACT FROM AUTHOR]

Frustrations, monetary losses, lost time, high fuel consumption and CO 2 emissions are some of the problems caused by traffic jams in urban centers. In an attempt to solve this problem, this article proposes a traffic service to control congestion, named FOXS–Fast Offset Xpath Service. FOXS aims to reduce the problems generated by a traffic jam in a distributed way through roads classification and the suggestion of new routes to vehicles. Unlike the related works, FOXS is modeled using the Fog computing paradigm. Therefore, it is possible to take advantage of the inherent aspects of this paradigm, such as low latency, processing load balancing, scalability, geographical correlation and the reduction of bandwidth usage. In order to validate FOXS, our performance evaluation considers two realistic urban scenarios with different characteristics. When compared with related works, FOXS shows a reduction in stop time by up to 70%, the CO 2 emissions by up to 29% and, the planning time index by up to 49%. When considering communication evaluation metrics, FOXS reaches a better result than other solutions on the packet collisions metric (up to 11.5%) and on the application delay metric (up to 30%). [ABSTRACT FROM AUTHOR]

Monitoring traffic states from the road is arousing increasing concern from traffic management authorities. To complete the picture of real-time traffic states, novel data sources have been introduced and studied in the transportation community for decades. This paper explores a supplementary and novel data source, Wi-Fi signal data, to extract traffic information through a well-designed system. An IoT (Internet of Things)-based Wi-Fi signal detector consisting of a solar power module, high capacity module, and IoT functioning module was constructed to collect Wi-Fi signal data. On this basis, a filtration and mining algorithm was developed to extract traffic state information (i.e., travel time, traffic volume, and speed). In addition, to evaluate the performance of the proposed system, a practical field test was conducted through the use of the system to monitor traffic states of a major corridor in China. The comparison results with loop data indicated that traffic speed obtained from the system was consistent with that collected from loop detectors. The mean absolute percentage error reached 3.55% in the best case. Furthermore, the preliminary analysis proved the existence of the highly correlated relationship between volumes obtained from the system and from loop detectors. The evaluation confirmed the feasibility of applying Wi-Fi signal data to acquisition of traffic information, indicating that Wi-Fi signal data could be used as a supplementary data source for monitoring real-time traffic states. [ABSTRACT FROM AUTHOR]

Over the past decades, there has been significant research effort dedicated to the development of intelligent vehicles and V2X systems. This paper proposes a road traffic risk assessment method for road traffic accident prevention of intelligent vehicles. This method is based on HMM (Hidden Markov Model) and is applied to the prediction of steering angle status to (1) evaluate the probabilities of the steering angle in each independent interval and (2) calculate the road traffic risk in different analysis regions. According to the model, the road traffic risk is quantified and presented directly in a visual form by the time-varying risk map, to ensure the accuracy of assessment and prediction. Experiment results are presented, and the results show the effectiveness of the assessment strategies. [ABSTRACT FROM AUTHOR]

Vehicle driving path planning is an important information service in intelligent transportation systems. As an important basis for path planning optimization, the travel time prediction method has attracted much attention. However, traffic flow has features of high nonlinearity, time-varying, and uncertainty, which makes it hard for prediction method with single feature to meet the accuracy demand of intelligent transportation system in big data environment. In this paper, the historical vehicle Global Positioning System (GPS) information data is used to establish the traffic prediction model. Firstly, the Clustering in QUEst (CLIQUE)-based clustering algorithm V-CLIQUE is proposed to analyze the historical vehicle GPS data. Secondly, an artificial neural network (ANN)-based prediction model is proposed. Finally, the ANN-based weighted shortest path algorithm, A-Dijkstra, is proposed. We used mean absolute percentage error (MAPE) to evaluate the predictive model and compare it with the predicted results of Average and support regression vector (SRV). Experiments show that the improved ANN path planning model we proposed can accurately predict real-time traffic status at the given location. It has less relative error and saves time for users' travel while saving social resources. [ABSTRACT FROM AUTHOR]

In this work, we present a system that generates customized pedestrian routes entirely based on data from OpenStreetMap (OSM). The system enables users to define to what extent they would like the route to have green areas (e.g., parks, squares, trees), social places (e.g., cafes, restaurants, shops) and quieter streets (i.e., with less road traffic). We present how the greenness, sociability, and quietness factors are defined and extracted from OSM as well as how they are integrated into a routing cost function. We intrinsically evaluate customized routes from one-thousand trips, i.e., origin–destination pairs, and observe that these are, in general, as we intended—slightly longer but significantly more social, greener, and quieter than the respective shortest routes. Based on a survey taken by 156 individuals, we also evaluate the system's usefulness, usability, controlability, and transparency. The majority of the survey participants agree that the system is useful and easy to use and that it gives them the feeling of being in control regarding the extraction of routes in accordance with their greenness, sociability, and quietness preferences. The survey also provides valuable insights into users requirements and wishes regarding a tool for interactively generating customized pedestrian routes. [ABSTRACT FROM AUTHOR]