Search

In this paper, a novel two-axis differential resonant accelerometer based on graphene with transmission beams is presented. This accelerometer can not only reduce the cross sensitivity, but also overcome the influence of gravity, realizing fast and accurate measurement of the direction and magnitude of acceleration on the horizontal plane. The simulation results show that the critical buckling acceleration is 460 g, the linear range is 0–89 g, while the differential sensitivity is 50,919 Hz/g, which is generally higher than that of the resonant accelerometer reported previously. Thus, the accelerometer belongs to the ultra-high sensitivity accelerometer. In addition, increasing the length and tension of graphene can obviously increase the critical linear acceleration and critical buckling acceleration with the decreasing sensitivity of the accelerometer. Additionally, the size change of the force transfer structure can significantly affect the detection performance. As the etching accuracy reaches the order of 100 nm, the critical buckling acceleration can reach up to 5 × 104 g, with a sensitivity of 250 Hz/g. To sum up, a feasible design of a biaxial graphene resonant accelerometer is proposed in this work, which provides a theoretical reference for the fabrication of a graphene accelerometer with high precision and stability. [ABSTRACT FROM AUTHOR]

The fused silica cylindrical resonator is a type of axisymmetric resonator that can be used for Coriolis vibratory gyroscopes. Although the resonant frequency, frequency mismatch, and Q factor are natural properties of the resonator, they can change with temperature. Therefore, the temperature drift severely limits the detection accuracy and bias stability of the gyroscope. In this paper, the influence of temperature variation on the vibrational characteristics of fused silica cylindrical resonators was investigated. Experiments were performed on a fused silica cylindrical resonator coated with Cr/Au films. It was shown that at the temperature range from 253.15 K to 353.15 K, the resonant frequency linearly increased with temperature, the frequency mismatch remained unchanged, and the Q factor gradually increased till about 333.15 K, when it began to decrease. Meanwhile, the change of thermoelastic damping with temperature may dominate the variation of Q factor at the temperature range from 253.15 K to 353.15 K. This phenomenon was theoretically analyzed and the variation trends of results were consistent with the theoretical analysis. This study indicates that, for the fused silica cylindrical resonator, to discover the influence of temperature variation on the resonant frequency, frequency mismatch, and Q factor, there are certain rules to follow and repeat. The relationship between temperature and frequency can be established, which provides the feasibility of using self-calibration based on temperature characteristics of the resonator for temperature drift compensations. Additionally, there is an optimum temperature that may improve the performance of the Coriolis vibratory gyroscope with the fused silica cylindrical resonator. [ABSTRACT FROM AUTHOR]

The Coriolis Vibratory Gyroscopes are a type of sensors that measure angular velocities through the Coriolis effect. The resonator is the critical component of the CVGs, the vibrational characteristics of which, including the resonant frequency, frequency mismatch, Q factor, and Q factor asymmetry, have a great influence on the performance of CVG. The frequency mismatch and Q factor of the resonator, in particular, directly determine the precision and drift characteristics of the gyroscope. Although the frequency mismatch and Q factor are natural properties of the resonator, they can change with external conditions, such as temperature, pressure, and external forces. In this paper, the influence of electrostatic forces on the vibrational characteristics of the fused silica cylindrical resonator is investigated. Experiments were performed on a fused silica cylindrical resonator coated with Cr/Au films. It was shown that the resonant frequency, frequency mismatch, and the decay time slightly decreased with electrostatic forces, while the decay time split increased. Lower capacitive gaps and larger applied voltages resulted in lower frequency mismatch and lower decay time. This phenomenon was theoretically analyzed, and the variation trends of results were consistent with the theoretical analysis. This study indicates that, for fused silica cylindrical resonator with electrostatic transduction, the electrostatic influence on the Q factor and frequency, although small, should be considered when designing the capacitive gap and choosing bias voltages. [ABSTRACT FROM AUTHOR]

The purpose of this work was to study bias error in acceleration-based transfer alignment, which is probably caused by cross-correlation between the dynamic lever-arm and the linear motion of a ship. A new prediction model for the cross-correlation-caused error is proposed in this paper. We adopt the Bernoulli-Euler Beam as a simplified ship hull-girder model to verify the existence of the cross-correlation. Then, the mathematical mechanism and the prediction model of the bias error are deduced via the ordinary least squares theory. Three factors influence the bias error in the prediction model: the amplitude of the dynamic lever arm acceleration, the amplitude of the ship motion acceleration, and the cross-correlation between them. Simulation experiments are then conducted to test the influence of the factors. The results show that the mechanism analysis is reasonable, and the bias error prediction model is in agreement with the experimental results. Thus, the proposed prediction model has the potential to deduce the bias error in high-accuracy transfer alignment. [ABSTRACT FROM AUTHOR]