Search

This paper reports on the design and experimental validation of a fully-metallic double-ridged waveguide 10 × 10 Rotman lens additively manufactured as a single part. The wide band operation of this quasi-optical beamformer enables us to cover the uplink and downlink frequencies allocated to satellite communications in the K/K a -band, from 17.3 GHz to 30 GHz. The feeding port design was adjusted to enable vertical printing, thus minimizing the use of supporting structures. A prototype was manufactured and tested. The reported results indicate losses in the range of 0.5 dB in the lower-frequency band and 0.8 dB in the upper-frequency band, including the waveguide transitions added for test purposes. The measured reflection and coupling coefficients remain below −11.5 dB over the operating band. The standard deviation of the residual phase error across the array ports is below 5 ° in simulation and below 10 ° in measurements. Array factors synthesized using the scattering parameters confirm the good stability of the beamforming functionality over the wide frequency band analyzed. This monolithic design is a promising step toward more integrated antenna systems, such as a compact dual-stack configuration for planar array design. [ABSTRACT FROM AUTHOR]

HERAS is a tool developed in Matlab for the analysis of reflector antennas using physical optics (PO) theory. Its graphical user interface (GUI) and source code are freely available for educational and research purposes. It has the necessity of being a flexible tool to provide adaptability to system engineering requirements and can also be of interest to antenna engineers working on the design of reflector antennas. Due to the increasing demand of broadband services, satellite communications systems are becoming highly complex in order to meet connectivity requirements. To fully exploit the benefits of these systems, multidimensional optimisations are crucial, which call for an efficient estimation of the coverage characteristics. Reflector-based solutions are one of the preferred architectures for very high-throughput satellite (VHTS) systems. A detailed description of HERAS is presented in this paper which has been validated with available commercial software packages. In addition, some examples are described in which the tool has been used for the efficient estimation of VHTS systems performance. [ABSTRACT FROM AUTHOR]

A very compact waveguide orthomode transducer (OMT) is described in this paper. The design is characterized with a twofold rotationally symmetric cross-section in the probing area, adapted from a side-coupling OMT design, simultaneously enabling low port-to-port coupling and high cross-polarization discrimination (XPD) over a fractional bandwidth of about 15–20%. Compared to previously reported compact waveguide OMTs, the proposed design is simpler, thus facilitating its manufacture at millimeter-wave frequencies. The concept is demonstrated with a design in the K-band for a broadband communication satellite downlink over the frequency band of 17.3–20.2 GHz. For test purposes, transitions to standard waveguide WR42 are included, and the OMT is assembled with a conical horn antenna. The measured reflection and coupling coefficients are below −19.5 dB and −22.9 dB, respectively, over the nominal bandwidth, and they are in good agreement with the simulation's results. The on-axis XPD, measured in an anechoic chamber, is better than 30 dB over the nominal bandwidth, which is also in line with simulations. The proposed waveguide OMT may be designed to fit in a lattice below one wavelength at the highest operating frequency, which is desirable for dual-polarized closely spaced array antennas in low and medium Earth orbit communication satellite systems. The simple mechanical design of the proposed OMT makes it particularly appealing for additive manufacturing techniques, as demonstrated with a variant of the design having folded single-mode waveguides, which preserves the RF properties of the original design. [ABSTRACT FROM AUTHOR]

Condition monitoring of synchronous generators through non-invasive methods is widely requested by maintenance teams for not interfering the machine operation. Among the techniques used, external magnetic field monitoring is a recent strategy with great potential for detecting incipient faults. In this context, this paper proposes the application of a simple strategy with low computational cost to process data of external magnetic field time derivative signals for the purposes of condition monitoring and fault detection in synchronous machines. The information of interest is extracted from changes in the magnetic signature of the synchronous generator, obtained from frequency spectra of monitored signals using induction magnetic field sensors. The process forms a set of time series that reflects constructive and operational characteristics of the machine. The Shewhart control chart method is applied for anomaly detection in these time series, allowing the detection of changes in the machine magnetic signature. This method is employed in an algorithm for continuous condition monitoring of synchronous generators, presenting as output a global change indicator for the multivariable problem associated with magnetic signature monitoring. Correlation matrices are used to improve the algorithm response, filtering series with similar variation patterns associated with detected events. The proposed method is validated through tests on an experimental bench that allows the controlled imposition of faults in a synchronous generator. The proposed global change indicator allows the automatic detection of stator and rotor faults with the machine synchronized with the commercial power grid. The proposed methodology is also applied on data obtained from an equipment installed in a 305 MVA synchronous generator of a hydroelectric power plant where the evolution of an incipient fault, i.e., a mechanical vibration fault, has been detected. [ABSTRACT FROM AUTHOR]

A review of technological solutions and advances in the framework of a Vertical Heterogeneous Network (VHetNet) integrating satellite, airborne and terrestrial networks is presented. The disruptive features and challenges offered by a fruitful cooperation among these segments within a ubiquitous and seamless wireless connectivity are described. The available technologies and the key research directions for achieving global wireless coverage by considering all these layers are thoroughly discussed. Emphasis is placed on the available antenna systems in satellite, airborne and ground layers by highlighting strengths and weakness and by providing some interesting trends in research. A summary of the most suitable applicative scenarios for future 6G wireless communications are finally illustrated. [ABSTRACT FROM AUTHOR]

The paper proposes a new set of normalization techniques for precoding/beamforming matrices applicable to broadband multiuser multiple-input multiple-output (MIMO) satellite systems. The proposed techniques adapt known normalization methods to account for the signal attenuation experienced by users due to the degradation of antenna gain and free space losses towards the edge of the coverage. We use, as an example, an array-fed reflector (AFR) antenna onboard a satellite in geosynchronous orbit (GEO), which provides a favorable trade-off between high-directivity, reconfigurability, and the requirement for digital processing, but suffers from high scan losses away from broadside due to optical aberrations when considered for global coverage applications. Three different precoding/beamforming techniques are employed, namely zero forcing (ZF), minimum mean squared error (MMSE), and matched filtering (MF). Low-complexity power normalization techniques digitally applied after the beamformer are introduced that, in the absence of any atmospheric effects, lead to iso-flux-like characteristics whilst satisfying the power constraint per feed. In comparison with other methods reported in the literature, mainly based on iterative algorithms, the proposed techniques consist in closed-form expressions to provide uniform signal-to-noise ratio (SNR) and signal-to-noise plus interference ratio (SNIR) across the users without significant impact on the payload sum rate. Numerical results are presented to comparatively demonstrate the achieved performance in terms of total capacity and distribution of SNR and SNIR at various noise and interference scenarios. [ABSTRACT FROM AUTHOR]