Search

This paper describes the main results of the JUNO project, a proof of concept developed in the Region of Murcia in Spain, where a smart assistant robot with capabilities for smart navigation and natural human interaction has been developed and deployed, and it is being validated in an elderly institution with real elderly users. The robot is focused on helping people carry out cognitive stimulation exercises and other entertainment activities since it can detect and recognize people, safely navigate through the residence, and acquire information about attention while users are doing the mentioned exercises. All the information could be shared through the Cloud, if needed, and health professionals, caregivers and relatives could access such information by considering the highest standards of privacy required in these environments. Several tests have been performed to validate the system, which combines classic techniques and new Deep Learning-based methods to carry out the requested tasks, including semantic navigation, face detection and recognition, speech to text and text to speech translation, and natural language processing, working both in a local and Cloud-based environment, obtaining an economically affordable system. The paper also discusses the limitations of the platform and proposes several solutions to the detected drawbacks in this kind of complex environment, where the fragility of users should be also considered. [ABSTRACT FROM AUTHOR]

Intensive care units (ICUs) are busy and noisy areas where patients and professional staff can be exposed to acoustic noise for long periods of time. In many cases, noise levels significantly exceed the levels recommended by the official health organisations. This situation can affect not only patient recovery but also professional staff, making ICUs unhealthy work and treatment environments. To introduce the measures and reduce the acoustic noise in the ICU, acoustic noise levels should first be measured and then appropriately analysed. However, in most studies dealing with this problem, measurements have been performed manually over short periods, leading to limited data being collected. They are usually followed by insufficient analysis, which in turn results in inadequate measures and noise reduction. This paper reviews recent works dealing with the problem of excessively high noise levels in ICUs and proposes a more thorough analysis of measured data both in the time and frequency domains. Applied frequency domain analysis identifies the cyclic behaviour of the measured sound pressure levels (SPLs) and detects the dominant frequency components in the SPL time series. Moreover, statistical analyses are produced to depict the patterns and SPLs to which patients in ICUs are typically exposed during their stay in the ICU. It has been shown that the acoustic environment is very similar every night, while it can vary significantly during the day or evening periods. However, during most of the observed time, recorded SPLs were significantly above the prescribed values, indicating an urgent need for their control and reduction. To effectively tackle this problem, more detailed information about the nature of noise during each of the analysed periods of the day is needed. This issue will be addressed in the continuation of this project. [ABSTRACT FROM AUTHOR]

This paper presents the implementation of an automatic method for the reconstruction of 3D building maps. The core innovation of the proposed method is the supplementation of OpenStreetMap data with LiDAR data to reconstruct 3D urban environments automatically. The only input of the method is the area that needs to be reconstructed, defined by the enclosing points in terms of the latitude and longitude. First, area data are requested in OpenStreetMap format. However, there are certain buildings and geometries that are not fully received in OpenStreetMap files, such as information on roof types or the heights of buildings. To complete the information that is missing in the OpenStreetMap data, LiDAR data are read directly and analyzed using a convolutional neural network. The proposed approach shows that a model can be obtained with only a few samples of roof images from an urban area in Spain, and is capable of inferring roofs in other urban areas of Spain as well as other countries that were not used to train the model. The results allow us to identify a mean of 75.57% for height data and a mean of 38.81% for roof data. The finally inferred data are added to the 3D urban model, resulting in detailed and accurate 3D building maps. This work shows that the neural network is able to detect buildings that are not present in OpenStreetMap for which in LiDAR data are available. In future work, it would be interesting to compare the results of the proposed method with other approaches for generating 3D models from OSM and LiDAR data, such as point cloud segmentation or voxel-based approaches. Another area for future research could be the use of data augmentation techniques to increase the size and robustness of the training dataset. [ABSTRACT FROM AUTHOR]

The measurement of the CO2 concentration has a wide range of applications. Traditionally, it has been used to assess air quality, with other applications linked to the experimental assessment of occupancy patterns and air renewal rates. More recently, the worldwide dissemination of COVID-19 establishing a relationship between infection risk and the mean CO2 level has abruptly led to the measurement of the CO2 concentration in order to limit the spread of this respiratory disease in the indoor environment. Therefore, the extensive application of this measurement outside of traditional air quality assessment requires an in-depth analysis of the suitability of these sensors for such modern applications. This paper discusses the performance of an array of commercial wall-mounted CO2 sensors, focusing on their application to obtain occupancy patterns and air renovation rates. This study is supported by several long-term test campaigns conducted in an in-use office building located in south-eastern Spain. The results show a spread of 19–101 ppm, with a drift of 28 ppm over 5 years, an offset of 2–301 ppm and fluctuations up to 80 ppm in instantaneous measurements not related to concentration changes. It is proposed that values averaged over 30 min, using a suitable reference value, be used to avoid erroneous results when calibration is not feasible. [ABSTRACT FROM AUTHOR]

This paper presents a device used to measure and register temperature for long-term subsoil measurements in boreholes. The borehole of this study is located in Gijón (Asturias, Spain). The measurements were made through two fixed sets of sensors coupled to the geothermal pipe, constituting two independent installations: (a) a commercial device called "Hobo", which uses TMCx-HD-specific sensors based on resistors with variable resistance; and (b) a device built by this research group, which uses DS12B20 Maxim sensors, a bus 1-wire, and a recording device based on a conventional Arduino board. Temperature was registered every 5 min across several years. These measurements were used to thermally characterize the subsoil, determining the apparent thermal diffusivity, and to study the thermo-hydrogeology of the Lower Jurassic Gijón's formation made of Liassic limestones and dolomites. This work is part of the Q-Thermie group's research called "Shallow Thermal Energy". [ABSTRACT FROM AUTHOR]

The dietary habits of people directly impact their health conditions. Especially in elder populations (in 2017, 6.7% of the world's population was over 65 years of age), these habits could lead to important-nutrient losses that could seriously affect their cognitive and functional state. Recently, a great research effort has been devoted to using different technologies and proposing different techniques for monitoring food-intake. Nevertheless, these techniques are usually generic but make use of the most innovative technologies and methodologies to obtain the best possible monitoring results. However, a large percentage of elderly people live in depopulated rural areas (in Spain, 28.1% of the elderly population lives in this type of area) with a fragile cultural and socioeconomic context. The use of these techniques in these environments is crucial to improving this group's quality of life (and even reducing their healthcare expenses). At the same time, it is especially challenging since they have very specific and strict requirements regarding the use and application of technology. In this Systematic Literature Review (SLR), we analyze the most important proposed technologies and techniques in order to identify whether they can be applied in this context and if they can be used to improve the quality of life of this fragile collective. In this SLR, we have analyzed 326 papers. From those, 29 proposals have been completely analyzed, taking into account the characteristics and requirements of this population. [ABSTRACT FROM AUTHOR]

Due to the relevant penetration of solar PV power plants, an accurate power generation forecasting of these installations is crucial to provide both reliability and stability of current grids. At the same time, PV monitoring requirements are more and more demanded by different agents to provide reliable information regarding performances, efficiencies, and possible predictive maintenance tasks. Under this framework, this paper proposes a methodology to evaluate different LoRa-based PV monitoring architectures and node layouts in terms of short-term solar power generation forecasting. A random forest model is proposed as forecasting method, simplifying the forecasting problem especially when the time series exhibits heteroscedasticity, nonstationarity, and multiple seasonal cycles. This approach provides a sensitive analysis of LoRa parameters in terms of node layout, loss of data, spreading factor and short time intervals to evaluate their influence on PV forecasting accuracy. A case example located in the southeast of Spain is included in the paper to evaluate the proposed analysis. This methodology is applicable to other locations, as well as different LoRa configurations, parameters, and networks structures; providing detailed analysis regarding PV monitoring performances and short-term PV generation forecasting discrepancies. [ABSTRACT FROM AUTHOR]

Thermal simulations have become increasingly popular in assessing energy efficiency and predicting thermal behaviors in various structures. Calibration of these simulations is essential for accurate predictions. A crucial aspect of this calibration involves investigating the influence of meteorological variables. This study aims to explore the impact of meteorological variables on thermal simulations, particularly focusing on ships. Using TRNSYS (TRaNsient System Simulation) software (v17), renowned for its capability to model complex energy systems within buildings, the significance of incorporating meteorological data into thermal simulations was analyzed. The investigation centered on a patrol vessel stationed in a port in Galicia, northwest Spain. To ensure accuracy, we not only utilized the vessel's dimensions but also conducted in situ temperature measurements onboard. Furthermore, a dedicated weather station was installed to capture real-time meteorological data. Data from multiple sources, including Meteonorm and MeteoGalicia, were collected for comparative analysis. By juxtaposing simulations based on meteorological variables against those relying solely on in situ measurements, we sought to discern the relative merits of each approach in enhancing the fidelity of thermal simulations. [ABSTRACT FROM AUTHOR]

The mobility and activity restrictions imposed in Spain due to the COVID-19 pandemic caused a significant improvement in the urban noise pollution that could be objectively measured in those cities with acoustic sensor networks deployed. This significant change in the urban soundscapes was also perceived by citizens who positively appraised this new acoustic scenario. In this work, authors present a comparative analysis between different noise indices provided by 70 sound sensors deployed in Barcelona, both during and before the lockdown, and the results of a perceptual test conducted in the framework of the project Sons al Balcó during the lockdown, which received more than one hundred contributions in Barcelona alone. The analysis has been performed by clustering the objective and subjective data according to the predominant noise sources in the location of the sensors and differentiating road traffic in heavy, moderate and low-traffic areas. The study brings out strong alignments between a decline in noise indices, acoustic satisfaction improvement and changes in the predominant noise sources, supporting the idea that objective calibrated data can be useful to make a qualitative approximation to the subjective perception of urban soundscapes when further information is not available. [ABSTRACT FROM AUTHOR]

Environmental audio monitoring is a huge area of interest for biologists all over the world. This is why some audio monitoring system have been proposed in the literature, which can be classified into two different approaches: acquirement and compression of all audio patterns in order to send them as raw data to a main server; or specific recognition systems based on audio patterns. The first approach presents the drawback of a high amount of information to be stored in a main server. Moreover, this information requires a considerable amount of effort to be analyzed. The second approach has the drawback of its lack of scalability when new patterns need to be detected. To overcome these limitations, this paper proposes an environmental Wireless Acoustic Sensor Network architecture focused on use of generic descriptors based on an MPEG-7 standard. These descriptors demonstrate it to be suitable to be used in the recognition of different patterns, allowing a high scalability. The proposed parameters have been tested to recognize different behaviors of two anuran species that live in Spanish natural parks; the Epidalea calamita and the Alytes obstetricans toads, demonstrating to have a high classification performance. [ABSTRACT FROM AUTHOR]

In this paper, we present Virtual Touch, a toolkit that allows the development of educational activities through a mixed reality environment such that, using various tangible elements, the interconnection of a virtual world with the real world is enabled. The main goal of Virtual Touch is to facilitate the installation, configuration and programming of different types of technologies, abstracting the creator of educational applications from the technical details involving the use of tangible interfaces and virtual worlds. Therefore, it is specially designed to enable teachers to themselves create educational activities for their students in a simple way, taking into account that teachers generally lack advanced knowledge in computer programming and electronics. The toolkit has been used to develop various educational applications that have been tested in two secondary education high schools in Spain. [ABSTRACT FROM AUTHOR]

In recent years, there has been a remarkable development in the technology and legislation related to electric and autonomous vehicles (i.e., EVs/AVs). This technological advancement requires the deployment of the most up-to-date supporting infrastructure to achieve safe operation. Further infrastructure is needed for Level 5 vehicles, namely the introduction of super-fast wireless 5G technology. To achieve harmony between the rapid technological advancement of EVs/AVs and environmental preservation, enacting legislation related to their sustainable use is vital. Thus, this manuscript provides a review of the technological development of EVs/AVs, with a special focus on carbon footprints and the implementation of additive manufacturing using recycled materials. While EVs have a 12.13% increased carbon footprint compared to conventional vehicles, AVs with basic and advanced intelligence features have an increased carbon footprint of 41.43% and 99.65%, respectively. This article emphasizes that the integration of 3D-printed components has the potential to offset this impact with a substantial 60% reduction. As a result, custom-made solutions involving 3D printing are explored, leading to greater speed, customization, and cost-effectiveness for EVs/AVs. This article also lists the advantages and disadvantages of the existing legislation in Spain, the United Kingdom, and the western Balkans, demonstrating various approaches to promoting electric mobility and the development of autonomous vehicles. In Spain, initiatives like the MOVES program incentivize EV adoption, while the UK focuses on expanding the EV market and addressing concerns about EVs' quiet operation. In the western Balkans, the adoption of legislation lags behind, with limited incentives and infrastructure for EVs. To boost sales, legal mechanisms are necessary to reduce costs and improve accessibility, in addition to offering subsidies for the purchase of EVs. To this end, an analysis of the incentive measures proposed for the development and use of renewable power sources for the supply of energy for EVs/AVs is presented. [ABSTRACT FROM AUTHOR]

Social Media are sensors in the real world that can be used to measure the pulse of societies. However, the massive and unfiltered feed of messages posted in social media is a phenomenon that nowadays raises social alarms, especially when these messages contain hate speech targeted to a specific individual or group. In this context, governments and non-governmental organizations (NGOs) are concerned about the possible negative impact that these messages can have on individuals or on the society. In this paper, we present HaterNet, an intelligent system currently being used by the Spanish National Office Against Hate Crimes of the Spanish State Secretariat for Security that identifies and monitors the evolution of hate speech in Twitter. The contributions of this research are many-fold: (1) It introduces the first intelligent system that monitors and visualizes, using social network analysis techniques, hate speech in Social Media. (2) It introduces a novel public dataset on hate speech in Spanish consisting of 6000 expert-labeled tweets. (3) It compares several classification approaches based on different document representation strategies and text classification models. (4) The best approach consists of a combination of a LTSM+MLP neural network that takes as input the tweet's word, emoji, and expression tokens' embeddings enriched by the tf-idf, and obtains an area under the curve (AUC) of 0.828 on our dataset, outperforming previous methods presented in the literature. [ABSTRACT FROM AUTHOR]

This paper presents a localization model employing convolutional neural network (CNN) and Gaussian process regression (GPR) based on Wi-Fi received signal strength indication (RSSI) fingerprinting data. In the proposed scheme, the CNN model is trained by a training dataset. The trained model adapts to complex scenes with multipath effects or many access points (APs). More specifically, the pre-processing algorithm makes the RSSI vector which is formed by considerable RSSI values from different APs readable by the CNN algorithm. The trained CNN model improves the positioning performance by taking a series of RSSI vectors into account and extracting local features. In this design, however, the performance is to be further improved by applying the GPR algorithm to adjust the coordinates of target points and offset the over-fitting problem of CNN. After implementing the hybrid model, the model is experimented with a public database that was collected from a library of Jaume I University in Spain. The results show that the hybrid model has outperformed the model using k-nearest neighbor (KNN) by 61.8%. While the CNN model improves the performance by 45.8%, the GPR algorithm further enhances the localization accuracy. In addition, the paper has also experimented with the three kernel functions, all of which have been demonstrated to have positive effects on GPR. [ABSTRACT FROM AUTHOR]

This paper exposes the existing problems for optimal industrial preventive maintenance intervals when decisions are made with right-censored data obtained from a network of sensors or other sources. A methodology based on the use of the z transform and a semi-Markovian approach is presented to solve these problems and obtain a much more consistent mathematical solution. This methodology is applied to a real case study of the maintenance of large marine engines of vessels dedicated to coastal surveillance in Spain to illustrate its usefulness. It is shown that the use of right-censored failure data significantly decreases the value of the optimal preventive interval calculated by the model. In addition, that optimal preventive interval increases as we consider older failure data. In sum, applying the proposed methodology, the maintenance manager can modify the preventive maintenance interval, obtaining a noticeable economic improvement. The results obtained are relevant, regardless of the number of data considered, provided that data are available with a duration of at least 75% of the value of the preventive interval. [ABSTRACT FROM AUTHOR]

Crop sustainability is essential for balancing economic development and environmental care, mainly in strong and very competitive regions in the agri-food sector, such as the Region of Murcia in Spain, considered to be the orchard of Europe, despite being a semi-arid area with an important scarcity of fresh water. In this region, farmers apply efficient techniques to minimize supplies and maximize quality and productivity; however, the effects of climate change and the degradation of significant natural environments, such as, the "Mar Menor", the most extent saltwater lagoon of Europe, threatened by resources overexploitation, lead to the search of even better irrigation management techniques to avoid certain effects which could damage the quaternary aquifer connected to such lagoon. This paper describes the Irriman Platform, a system based on Cloud Computing techniques, which includes low-cost wireless data loggers, capable of acquiring data from a wide range of agronomic sensors, and a novel software architecture for safely storing and processing such information, making crop monitoring and irrigation management easier. The proposed platform helps agronomists to optimize irrigation procedures through a usable web-based tool which allows them to elaborate irrigation plans and to evaluate their effectiveness over crops. The system has been deployed in a large number of representative crops, located along near 50,000 ha of the surface, during several phenological cycles. Results demonstrate that the system enables crop monitoring and irrigation optimization, and makes interaction between farmers and agronomists easier. [ABSTRACT FROM AUTHOR]

Photosensitivity is a neurological disorder in which a person's brain produces epileptic discharges, known as Photoparoxysmal Responses (PPRs), when it receives certain visual stimuli. The current standardized diagnosis process used in hospitals consists of submitting the subject to the Intermittent Photic Stimulation process and attempting to trigger these phenomena. The brain activity is measured by an Electroencephalogram (EEG), and the clinical specialists manually look for the PPRs that were provoked during the session. Due to the nature of this disorder, long EEG recordings may contain very few PPR segments, meaning that a highly imbalanced dataset is available. To tackle this problem, this research focused on applying Data Augmentation (DA) to create synthetic PPR segments from the real ones, improving the balance of the dataset and, thus, the global performance of the Machine Learning techniques applied for automatic PPR detection. K-Nearest Neighbors and a One-Hidden-Dense-Layer Neural Network were employed to evaluate the performance of this DA stage. The results showed that DA is able to improve the models, making them more robust and more able to generalize. A comparison with the results obtained from a previous experiment also showed a performance improvement of around 20% for the Accuracy and Specificity measurements without Sensitivity suffering any losses. This project is currently being carried out with subjects at Burgos University Hospital, Spain. [ABSTRACT FROM AUTHOR]

Biogeography is a key concept associated with microbial terroir, which is responsible for the differentiation and uniqueness of wines. One of the factors influencing this microbial terroir is the vegetation, which in turn is influenced by climate, soil, and cultural practices. Remote sensing instruments can provide useful information about vegetation. This study analyses the relationship between NDVI, calculated using Sentinel-2 and Landsat-8 satellite images of different veraison dates, and microbial data obtained in 2015 from 14 commercial (organic and conventional) vineyards belonging to four Designations of Origin (DOs) from Galicia (northwest Spain). Microbial populations in grapes and musts were identified using PCR techniques and confirmed by sequencing. Statistical analyses were made using PCA, CCA, TB-PLS, and correlation analyses. This study confirms that the NDVI is positively correlated with the diversity of yeasts, both in grapes' surface and must samples. Moreover, the results of this study show: (i) Sentinel-2 images, as well as Landsat-8 images, can establish differences in NDVI related to yeast terroir in grapes and musts, as it is the most relevant DO factor, (ii) Sentinel-2 NDVI and yeast biogeography are moderately to strongly correlated, (iii) Sentinel-2 achieved a better delimitation of the DOs than Landsat-8 and can establish more accurate differences in NDVI–yeast terroir correlations, and (iv) a higher NDVI was associated with the yeast biogeographical patterns of the DOs with higher species richness (S) consisting of weakly fermenting yeasts (Hanseniaspora uvarum, Pichia spp., Starmerella bacillaris, and Zygosaccharomyces spp). However, NDVI values did not correlate well with biogeographic patterns of yeasts previously studied at frequency level (proportion or percentage of each species) in each particular DO. This study suggests that satellite imagery has the potential to be a valuable tool for wine quality management and a decision-making instrument for DO regulators and winegrowers. [ABSTRACT FROM AUTHOR]

The large amount of sensors in modern electrical networks poses a serious challenge in the data processing side. For many years, spectral analysis has been one of the most used approaches to extract physically meaningful information from a sea of data. Fourier Transform (FT) and Wavelet Transform (WT) are by far the most employed tools in this analysis. In this paper we explore the alternative use of Hilbert–Huang Transform (HHT) for electricity demand spectral representation. A sequence of hourly consumptions, spanning 40 months of electrical demand in Spain, has been used as dataset. First, by Empirical Mode Decomposition (EMD), the sequence has been time-represented as an ensemble of 13 Intrinsic Mode Functions (IMFs). Later on, by applying Hilbert Transform (HT) to every IMF, an HHT spectrum has been obtained. Results show smoother spectra with more defined shapes and an excellent frequency resolution. EMD also fosters a deeper analysis of abnormal electricity demand at different timescales. Additionally, EMD permits information compression, which becomes very significant for lossless sequence representation. A 35% reduction has been obtained for the electricity demand sequence. On the negative side, HHT demands more computer resources than conventional spectral analysis techniques. [ABSTRACT FROM AUTHOR]

The current agricultural water panorama in many Mediterranean countries is composed by desalination facilities, wells (frequently overexploited), the water public utility network, and several consumer agents with different water needs. This distributed water network requires centralized management methods for its proper use, which are difficult to implement as the different agents are usually geographically separated. In this sense, the use of enabling technologies such as the Internet of Things can be essential to the proper operation of these agroindustrial systems. In this paper, an Internet of Things cloud architecture based on the FIWARE standard is proposed for interconnecting the several agents that make up the agroindustrial system. In addition, this architecture includes an efficient management method based on a model predictive control technique, which is aimed at minimizing operating costs. A case study inspired by three real facilities located in Almería (southeast of Spain) is used as the simulation test bed. The obtained results show how around 75% of the total operating costs can be saved with the application of the proposed approach, which could be very significant to decrease the costs of desalinated water and, therefore, to maintain the sustainability of the agricultural system. [ABSTRACT FROM AUTHOR]

Heart failure is the most common disease among elderly people, and the risk increases with age. The use of smart Internet of Things (IoT) systems for monitoring patients with chronic heart failure (CHF) in a non-intrusive manner can result in better control of the disease, improving proactive healthcare through real-time and historical patient's data, promoting self-care in patients, reducing unneeded interaction between patients and doctors, reducing the number of hospitalizations and saving healthcare costs. This work presents an active assisted living (AAL) solution based on the IoT to provide a tele-assistance platform for CHF patients from the public health service of the region of Murcia in Spain, with formal and informal caregivers and health professionals also as key actors. In this article, we have detailed the methodology, results, and conclusions of the prevalidation phase for the set of IoT technologies to be integrated in the AAL platform, the first mandatory step before the deployment of a large-scale pilot that will lead to improving the innovation of the system from its current technology readiness level to the market. The work presented, in the framework of the H2020 Pharaon project, aims to serve as inspiration to the R&D community for the design, development, and deployment of AAL solutions based on heterogeneous IoT technologies, or similar approaches, for smart healthcare solutions in real healthcare institutions. [ABSTRACT FROM AUTHOR]

In this work, a wireless data acquisition system for seismic noise array measurements is presented. The developed system is composed of a series of nodes and a central server arranged in a point-to-multipoint topology. The nodes consist of a CC3200 microcontroller, an analog-to-digital converter, and a low-noise conditioning circuit designed specifically to register seismic noise, and which is connected to the seismic sensor. As a server, a Raspberry Pi 4B has been used that will receive the samples from the nodes via Wi-Fi and will save them in files. It also incorporates a Web interface developed with JavaScript node.js technology that allows to configure the number of nodes as well as different options, to start and stop the records, and to view in real time the different signals received from the nodes. The system can be deployed anywhere since each of the nodes use independent batteries as a power supply. In addition, it is possible to operate the system remotely if internet connectivity is available. The prototype has been tested in four different locations in the Alicante province (southeast Spain), demonstrating its suitability for seismic noise array measurements. [ABSTRACT FROM AUTHOR]

Human tracking and traffic monitoring systems are required to build advanced intelligent, innovative mobility services. In this study, we introduce an IoT system based on low-cost hardware that has been installed on the campus of the University of Malaga, in Spain. The sensors gather smart wireless devices (Bluetooth and Wi-Fi) anonymous information and environmental noise level around them. This research studies the spatio-temporal behavior of people and noise pollution in the campus as a short-scale Smart City, i.e., a Smart Campus. Applying specific machine learning algorithms, we have analyzed two months of captured data (61 days). The main findings from the analysis show that most university community members move through the campus at similar hours, generating congestion problems. In addition, the campus suffers from acoustic pollution according to regulations; therefore, we conclude that the proposed system is useful for gathering helpful information for the university community members and managers. Thanks to its low cost, it can be easily extended and even used in other similar environments, allowing democratic access to Smart City services as an excellent added value. [ABSTRACT FROM AUTHOR]

COVID-19 has caused millions of infections and deaths over the last 2 years. Machine learning models have been proposed as an alternative to conventional epidemiologic models in an effort to optimize short- and medium-term forecasts that will help health authorities to optimize the use of policies and resources to tackle the spread of the SARS-CoV-2 virus. Although previous machine learning models based on time pattern analysis for COVID-19 sensed data have shown promising results, the spread of the virus has both spatial and temporal components. This manuscript proposes a new deep learning model that combines a time pattern extraction based on the use of a Long-Short Term Memory (LSTM) Recurrent Neural Network (RNN) over a preceding spatial analysis based on a Convolutional Neural Network (CNN) applied to a sequence of COVID-19 incidence images. The model has been validated with data from the 286 health primary care centers in the Comunidad de Madrid (Madrid region, Spain). The results show improved scores in terms of both root mean square error (RMSE) and explained variance (EV) when compared with previous models that have mainly focused on the temporal patterns and dependencies. [ABSTRACT FROM AUTHOR]

New computational methods have emerged through science and technology to support the diagnosis of mental health disorders. Predictive models developed from machine learning algorithms can identify disorders such as schizophrenia and support clinical decision making. This research aims to compare the performance of machine learning algorithms: Decision Tree, AdaBoost, Random Forest, Naïve Bayes, Support Vector Machine, and k-Nearest Neighbor in the prediction of hospitalized patients with schizophrenia. The data set used in the study contains a total of 11,884 electronic admission records corresponding to 6933 patients with various mental health disorders; these records belong to the acute units of 11 public hospitals in a region of Spain. Of the total, 5968 records correspond to patients diagnosed with schizophrenia (3002 patients) and 5916 records correspond to patients with other mental health disorders (3931 patients). The results recommend Random Forest with the best accuracy of 72.7%. Furthermore, this algorithm presents 79.6%, 72.8%, 72.7%, and 72.7% for AUC, precision, F1-Score, and recall, respectively. The results obtained suggest that the use of machine learning algorithms can classify hospitalized patients with schizophrenia in this population and help in the hospital management of this type of disorder, to reduce the costs associated with hospitalization. [ABSTRACT FROM AUTHOR]

This work presents a method for oil-spill detection on Spanish coasts using aerial Side-Looking Airborne Radar (SLAR) images, which are captured using a Terma sensor. The proposed method uses grayscale image processing techniques to identify the dark spots that represent oil slicks on the sea. The approach is based on two steps. First, the noise regions caused by aircraft movements are detected and labeled in order to avoid the detection of false-positives. Second, a segmentation process guided by a map saliency technique is used to detect image regions that represent oil slicks. The results show that the proposed method is an improvement on the previous approaches for this task when employing SLAR images. [ABSTRACT FROM AUTHOR]

Cava is a quality sparkling wine produced in Spain. As a product with a designation of origin, Cava wine has to meet certain quality requirements throughout its production process; therefore, the analysis of several parameters is of great interest. In this work, a portable electronic tongue for the analysis of Cava wine is described. The system is comprised of compact and low-power-consumption electronic equipment and an array of microsensors formed by six ion-selective field effect transistors sensitive to pH, Na+, K+, Ca2+, Cl-, and CO3 2-, one conductivity sensor, one redox potential sensor, and two amperometric gold microelectrodes. This system, combined with chemometric tools, has been applied to the analysis of 78 Cava wine samples. Results demonstrate that the electronic tongue is able to classify the samples according to the aging time, with a percentage of correct prediction between 80% and 96%, by using linear discriminant analysis, as well as to quantify the total acidity, pH, volumetric alcoholic degree, potassium, conductivity, glycerol, and methanol parameters, with mean relative errors between 2.3% and 6.0%, by using partial least squares regressions. [ABSTRACT FROM AUTHOR]

Sensors, communication systems and geo-reference units are required to achieve an optimized management of agricultural inputs with respect to the economic and environmental aspects of olive groves. In this study, three commercial olive harvesters were tracked during two harvesting seasons in Spain and Chile using remote and autonomous equipment that was developed to determine their time efficiency and effective based on canopy shaking for fruit detachment. These harvesters work in intensive/high-density (HD) and super-high-density (SHD) olive orchards. A GNSS (Global Navigation Satellite System) and GSM (Global System for Mobile Communications) device was installed to track these harvesters. The GNSS receiver did not affect the driver's work schedule. Time elements methodology was adapted to the remote data acquisition system. The effective field capacity and field efficiency were investigated. In addition, the field shape, row length, angle between headland alley and row, and row alley width were measured to determinate the optimum orchard design parameters value. The SHD olive harvester showed significant lower effective field capacity values when alley width was less than 4 m. In addition, a yield monitor was developed and installed on a traditional olive harvester to obtain a yield map from the harvested area. The hedge straddle harvester stood out for its highly effective field capacity; nevertheless, a higher field efficiency was provided by a non-integral lateral canopy shaker. All of the measured orchard parameters have influenced machinery yields, whether effective field capacity or field efficiency. A saving of 40% in effective field capacity was achieved with a reduction from 4 m or higher to 3.5 m in alley width for SHD olive harvester. A yield map was plotted using data that were acquired by a yield monitor, reflecting the yield gradient in spite of the larger differences between tree yields. [ABSTRACT FROM AUTHOR]

The article presents an introduction to this special issue covering topics related to the state-of-the-art sensor technology in Spain.

The aim of the present work was to determine the main quality parameters on tuber potato using a portable near-infrared spectroscopy device (MicroNIR). Potato tubers protected by the Protected Geographical Indication (PGI "Patata de Galicia", Spain) were analyzed both using chemical methods of reference and also using the NIR methodology for the determination of important parameters for tuber commercialization, such as dry matter and reducing sugars. MicroNIR technology allows for the attainment/estimation of dry matter and reducing sugars in the warehouses by directly measuring the tubers without a chemical treatment and destruction of samples. The principal component analysis and modified partial least squares regression method were used to develop the NIR calibration model. The best determination coefficients obtained for dry matter and reducing sugars were of 0.72 and 0.55, respectively, and with acceptable standard errors of cross-validation. Near-infrared spectroscopy was established as an effective tool to obtain prediction equations of these potato quality parameters. At the same time, the efficiency of portable devices for taking instantaneous measurements of crucial quality parameters is useful for potato processors. [ABSTRACT FROM AUTHOR]

Cities in the 21st century play a major role in the sustainability and climate impact reduction challenges set by the European agenda. As the population of cities grows and their environmental impact becomes more evident, the European strategy aims to reduce greenhouse gas emissions—the main cause of climate change. Measures to reduce the impact of climate change include reducing energy consumption, improving mobility, harnessing resources and renewable energies, integrating nature-based solutions and efficiently managing infrastructure. The monitoring and control of all this activity is essential for its proper functioning. In this context, Information and Communication Technology (ICT) plays a key role in the digitisation, monitoring, and managing of these different verticals. Urban data platforms support cities on extracting Key Performance Indicators (KPI) in their efforts to make better decisions. Cities must be transformed by applying efficient urban planning measures and taking into account not only technological aspects, but also by applying a holistic vision in building solutions where citizens are at the centre. In addition, standardisation of platforms where applications are integrated as one is necessary. This requires interoperability between different verticals. This article presents the information platform developed for the city of Vitoria-Gasteiz in Spain. The platform is based on the UNE 178104 standard to provide a holistic architecture that integrates information from the different urban planning measures implemented in the city. The platform was constructed in the context of the SmartEnCity project following the urban transformation strategy established by the city. The article presents the value-added solutions implemented in the platform. These solutions have been developed by applying co-creation techniques in which stakeholders have been involved throughout the process. The platform proposes a step forward towards standardization, harmonises the integration of data from multiple vertical, provides interoperability between services, and simplifies scalability and replicability due to its microservice architecture. [ABSTRACT FROM AUTHOR]

COVID-19 has dramatically struck each section of our society: health, economy, employment, and mobility. This work presents a data-driven characterization of the impact of COVID-19 pandemic on public and private mobility in a mid-size city in Spain (Fuenlabrada). Our analysis used real data collected from the public transport smart card system and a Bluetooth traffic monitoring network, from February to September 2020, thus covering relevant phases of the pandemic. Our results show that, at the peak of the pandemic, public and private mobility dramatically decreased to 95 % and 86 % of their pre-COVID-19 values, after which the latter experienced a faster recovery. In addition, our analysis of daily patterns evidenced a clear change in the behavior of users towards mobility during the different phases of the pandemic. Based on these findings, we developed short-term predictors of future public transport demand to provide operators and mobility managers with accurate information to optimize their service and avoid crowded areas. Our prediction model achieved a high performance for pre- and post-state-of-alarm phases. Consequently, this work contributes to enlarging the knowledge about the impact of pandemic on mobility, providing a deep analysis about how it affected each transport mode in a mid-size city. [ABSTRACT FROM AUTHOR]

This work describes an assistive technology development for cognitive support and training to be used by children of special education schools in Spain. Design is based on and guided by cognitive support findings coming from a long-term collaboration of a team of engineers (University of Zaragoza) and special education teachers (Alborada Special Education School, Zaragoza). The description starts by providing a structure of such findings in five cognitive-social areas (interface usability, virtual representations understanding, time orientation, self-awareness, and social interaction). Design requirements are extracted by applying those findings to four support services (home control, time orientation, behavior contention, and context anticipation). Technological system description follows, together with the degree of implementation and testing for each service. A major result is the benefit of using a services interface with the same structure and appearance as the alternative and augmentative communication system that children are already acquainted with. Based on regulatory conditions, the needed flexibility, and reduced available budgets, this support platform is built on mainstream technology and low-cost single-board computers with standard databases and free software packages. Results show evidence of benefit in children's cognitive and social performance, in addition to offering a technological tool for deeper educational research. [ABSTRACT FROM AUTHOR]

Good air quality is essential for both human beings and the environment in general. The three most harmful air pollutants are nitrogen dioxide (NO2), ozone (O3) and particulate matter. Due to the high cost of monitoring stations, few examples of this type of infrastructure exist, and the use of low-cost sensors could help in air quality monitoring. The cost of metal-oxide sensors (MOS) is usually below EUR 10 and they maintain small dimensions, but their use in air quality monitoring is only valid through an exhaustive calibration process and subsequent precision analysis. We present an on-field calibration technique, based on the least squares method, to fit regression models for low-cost MOS sensors, one that has two main advantages: it can be easily applied by non-expert operators, and it can be used even with only a small amount of calibration data. In addition, the proposed method is adaptive, and the calibration can be refined as more data becomes available. We apply and evaluate the technique with a real dataset from a particular area in the south of Spain (Granada city). The evaluation results show that, despite the simplicity of the technique and the low quantity of data, the accuracy obtained with the low-cost MOS sensors is high enough to be used for air quality monitoring. [ABSTRACT FROM AUTHOR]

Currently, there are more than 1.55 million cases of SARS-CoV-2 infection in Spain. Of these, it is estimated that around 45% will present respiratory complications, which represents approximately 620,000 patients who will need respiratory rehabilitation. The health system has no resources for this huge quantity of patients after the hospital discharge to finish the complete recovery and avoid the chronicity of the symptoms. We propose an application named RespiraConNosotros. The application has been created and designed to guide users in performing respiratory rehabilitation exercises, especially for COVID-19 patients, and it also facilitates patient–physiotherapist contact via chat or video calling to help patients. It is accessible for all users and on all devices. All exercises would be guided and supervised by a specialized physiotherapist who suggests, adapts, and guides the exercise according to the function level of each patient. Data obtained was satisfactory; all patients pointed out the easy access, the intuitive format, and the advantage of communicating with an expert. Concerning functional assessment, all participants improved their score on the Borg scale after performing the intervention with the application.This platform would help respiratory patients to make rehabilitation treatments to recover their pulmonary function and to decrease or eliminate the possible complications they have. It never substitutes any prescribed treatment. In conclusion, RespiraConNosotros is a simple, viable, and safe alternative for the improvement and maintenance of respiratory capacity and patient's functionality affected by COVID-19. It could be used as a complement to face-to-face treatment when the situation allows it. [ABSTRACT FROM AUTHOR]

This work proposes a quantile regression neural network based on a novel constrained weighted quantile loss (CWQLoss) and its application to probabilistic short and medium-term electric-load forecasting of special interest for smart grids operations. The method allows any point forecast neural network based on a multivariate multi-output regression model to be expanded to become a quantile regression model. CWQLoss extends the pinball loss to more than one quantile by creating a weighted average for all predictions in the forecast window and across all quantiles. The pinball loss for each quantile is evaluated separately. The proposed method imposes additional constraints on the quantile values and their associated weights. It is shown that these restrictions are important to have a stable and efficient model. Quantile weights are learned end-to-end by gradient descent along with the network weights. The proposed model achieves two objectives: (a) produce probabilistic (quantile and interval) forecasts with an associated probability for the predicted target values. (b) generate point forecasts by adopting the forecast for the median (0.5 quantiles). We provide specific metrics for point and probabilistic forecasts to evaluate the results considering both objectives. A comprehensive comparison is performed between a selection of classic and advanced forecasting models with the proposed quantile forecasting model. We consider different scenarios for the duration of the forecast window (1 h, 1-day, 1-week, and 1-month), with the proposed model achieving the best results in almost all scenarios. Additionally, we show that the proposed method obtains the best results when an additive ensemble neural network is used as the base model. The experimental results are drawn from real loads of a medium-sized city in Spain. [ABSTRACT FROM AUTHOR]

This research focuses on the study of the ruins of a large building known as "El Torreón" (the Tower), belonging to the Ulaca oppidum (Solosancho, Province of Ávila, Spain). Different remote sensing and geophysical approaches have been used to fulfil this objective, providing a better understanding of the building's functionality in this town, which belongs to the Late Iron Age (ca. 300–50 BCE). In this sense, the outer limits of the ruins have been identified using photogrammetry and convergent drone flights. An additional drone flight was conducted in the surrounding area to find additional data that could be used for more global interpretations. Magnetometry was used to analyze the underground bedrock structure and ground penetrating radar (GPR) was employed to evaluate the internal layout of the ruins. The combination of these digital methodologies (surface and underground) has provided a new perspective for the improved interpretation of "El Torreón" and its characteristics. Research of this type presents additional guidelines for better understanding of the role of this structure with regards to other buildings in the Ulaca oppidum. The results of these studies will additionally allow archaeologists to better plan future interventions while presenting new data that can be used for the interpretation of this archaeological complex on a larger scale. [ABSTRACT FROM AUTHOR]

This study aims to produce accurate predictions of the NO2 concentrations at a specific station of a monitoring network located in the Bay of Algeciras (Spain). Artificial neural networks (ANNs) and sequence-to-sequence long short-term memory networks (LSTMs) were used to create the forecasting models. Additionally, a new prediction method was proposed combining LSTMs using a rolling window scheme with a cross-validation procedure for time series (LSTM-CVT). Two different strategies were followed regarding the input variables: using NO2 from the station or employing NO2 and other pollutants data from any station of the network plus meteorological variables. The ANN and LSTM-CVT exogenous models used lagged datasets of different window sizes. Several feature ranking methods were used to select the top lagged variables and include them in the final exogenous datasets. Prediction horizons of t + 1, t + 4 and t + 8 were employed. The exogenous variables inclusion enhanced the model's performance, especially for t + 4 (ρ ≈ 0.68 to ρ ≈ 0.74) and t + 8 (ρ ≈ 0.59 to ρ ≈ 0.66). The proposed LSTM-CVT method delivered promising results as the best performing models per prediction horizon employed this new methodology. Additionally, per each parameter combination, it obtained lower error values than ANNs in 85% of the cases. [ABSTRACT FROM AUTHOR]

Forest fires are undesirable situations with tremendous impacts on wildlife and people's lives. Reaching them quickly is essential to slowing down their expansion and putting them out in an effective manner. This work proposes an optimized distribution of fire stations in the province of Valencia (Spain) to minimize the impacts of forest fires. Using historical data about fires in the Valencia province, together with the location information about existing fire stations and municipalities, two different clustering techniques have been applied. Floyd–Warshall dynamic programming algorithm has been used to estimate the average times to reach fires among municipalities and fire stations in order to quantify the impacts of station relocation. The minimization was done approximately through k-means clustering. The outcomes with different numbers of clusters determined a predicted tradeoff between reducing the time and the cost of more stations. The results show that the proposed relocation of fire stations generally ensures faster arrival to the municipalities compared to the current disposition of fire stations. In addition, deployment costs associated with station relocation are also of paramount importance, so this factor was also taken into account in the proposed approach. [ABSTRACT FROM AUTHOR]

This article describes the event detection system of the NEXT-White detector, a 5 kg high pressure xenon TPC with electroluminescent amplification, located in the Laboratorio Subterráneo de Canfranc (LSC), Spain. The detector is based on a plane of photomultipliers (PMTs) for energy measurements and a silicon photomultiplier (SiPM) tracking plane for offline topological event filtering. The event detection system, based on the SRS-ATCA data acquisition system developed in the framework of the CERN RD51 collaboration, has been designed to detect multiple events based on online PMT signal energy measurements and a coincidence-detection algorithm. Implemented on FPGA, the system has been successfully running and evolving during NEXT-White operation. The event detection system brings some relevant and new functionalities in the field. A distributed double event processor has been implemented to detect simultaneously two different types of events thus allowing simultaneous calibration and physics runs. This special feature provides constant monitoring of the detector conditions, being especially relevant to the lifetime and geometrical map computations which are needed to correct high-energy physics events. Other features, like primary scintillation event rejection, or a double buffer associated with the type of event being searched, help reduce the unnecessary data throughput thus minimizing dead time and improving trigger efficiency. [ABSTRACT FROM AUTHOR]

Precision agriculture is a growing sector that improves traditional agricultural processes through the use of new technologies. In southeast Spain, farmers are continuously fighting against harsh conditions caused by the effects of climate change. Among these problems, the great variability of temperatures (up to 20 ° C in the same day) stands out. This causes the stone fruit trees to flower prematurely and the low winter temperatures freeze the flower causing the loss of the crop. Farmers use anti-freeze techniques to prevent crop loss and the most widely used techniques are those that use water irrigation as they are cheaper than other techniques. However, these techniques waste too much water and it is a scarce resource, especially in this area. In this article, we propose a novel intelligent Internet of Things (IoT) monitoring system to optimize the use of water in these anti-frost techniques while minimizing crop loss. The intelligent component of the IoT system is designed using an approach based on a multivariate Long Short-Term Memory (LSTM) model, designed to predict low temperatures. We compare the proposed approach of multivariate model with the univariate counterpart version to figure out which model obtains better accuracy to predict low temperatures. An accurate prediction of low temperatures would translate into significant water savings, as anti-frost techniques would not be activated without being necessary. Our experimental results show that the proposed multivariate LSTM approach improves the univariate counterpart version, obtaining an average quadratic error no greater than 0.65 ° C and a coefficient of determination R 2 greater than 0.97. The proposed system has been deployed and is currently operating in a real environment obtained satisfactory performance. [ABSTRACT FROM AUTHOR]

Although the cure for the SARS-CoV-2 virus (COVID-19) will come in the form of pharmaceutical solutions and/or a vaccine, one of the only ways to face it at present is to guarantee the best quality of health for patients, so that they can overcome the disease on their own. Therefore, and considering that COVID-19 generally causes damage to the respiratory system (in the form of lung infection), it is essential to ensure the best pulmonary ventilation for the patient. However, depending on the severity of the disease and the health condition of the patient, the situation can become critical when the patient has respiratory distress or becomes unable to breathe on his/her own. In that case, the ventilator becomes the lifeline of the patient. This device must keep patients stable until, on their own or with the help of medications, they manage to overcome the lung infection. However, with thousands or hundreds of thousands of infected patients, no country has enough ventilators. If this situation has become critical in the Global North, it has turned disastrous in developing countries, where ventilators are even more scarce. This article shows the race against time of a multidisciplinary research team at the University of Huelva, UHU, southwest of Spain, to develop an inexpensive, multifunctional, and easy-to-manufacture ventilator, which has been named ResUHUrge. The device meets all medical requirements and is developed with open-source hardware and software. [ABSTRACT FROM AUTHOR]

Smart meter (SM) deployment in the residential context provides a vast amount of data of high granularity at the individual household level. In this context, the choice of temporal resolution for describing household load profile features has a crucial impact on the results of any action or assessment. This study presents a methodology that makes two new contributions. Firstly, it proposes periodograms along with autocorrelation and partial autocorrelation analyses and an empirical distribution-based statistical analysis, which are able to describe household consumption profile features with greater accuracy. Secondly, it proposes a framework for data collection in households at a high sampling frequency. This methodology is able to analyze the influence of data granularity on the description of household consumption profile features. Its effectiveness was confirmed in a case study of four households in Spain. The results indicate that high-resolution data should be used to consider the full range of consumption load fluctuations. Nonetheless, the accuracy of these features was found to largely depend on the load profile analyzed. Indeed, in some households, accurate descriptions were obtained with coarse-grained data. In any case, an intermediate data-resolution of 5 s showed feature characterization closer to those of 0.5 s. [ABSTRACT FROM AUTHOR]

Improving road safety through artificial intelligence-based systems is now crucial turning smart cities into a reality. Under this highly relevant and extensive heading, an approach is proposed to improve vehicle detection in smart crosswalks using machine learning models. Contrarily to classic fuzzy classifiers, machine learning models do not require the readjustment of labels that depend on the location of the system and the road conditions. Several machine learning models were trained and tested using real traffic data taken from urban scenarios in both Portugal and Spain. These include random forest, time-series forecasting, multi-layer perceptron, support vector machine, and logistic regression models. A deep reinforcement learning agent, based on a state-of-the-art double-deep recurrent Q-network, is also designed and compared with the machine learning models just mentioned. Results show that the machine learning models can efficiently replace the classic fuzzy classifier. [ABSTRACT FROM AUTHOR]

Robotics is one of the key learnings in a world where learners will interact with multiple robotic technologies and operating systems throughout their lives. However, school teachers, especially in the elementary and primary education stages, often have difficulties incorporating these tools in the classroom. Four elementary teachers in three schools in Catalonia were trained to introduce robotics in the classroom to seventy-five students. The main actions consisted in classroom accompaniment by a university-trained support teacher, curricular materials' development, and assessment of the students' and teachers' learning. The designed contents and evaluation criteria took into account the potential of educational robotics to improve soft skills and to promote Science, Technology, Engineering, Arts, and Mathematics (STEAM) interdisciplinary learning. Teachers perceived the training to be supportive and useful and ended the school year feeling confident with the used robotic platform (KIBO). The assessment of the students' learning showed an average mark of 7.1–7.7 over 10 in the final evaluation criteria. Moreover, students' learning was higher in the classes where the teachers had higher initial interest in the training. We present and analyse the actions carried out, with a critical and constructive look at extending the experience to other educational centers. [ABSTRACT FROM AUTHOR]

Radon gas has been declared a human carcinogen by the United States Environmental Protection Agency (USEPA) and the International Agency for Research on Cancer (IARC). Several studies carried out in Spain highlighted the high radon concentrations in several regions, with Galicia (northwestern Spain) being one of the regions with the highest radon concentrations. The objective of this work was to create a safe and low-cost radon monitoring and alert system, based on open source technologies. To achieve this objective, the system uses devices, a collection of sensors with a processing unit and a communication module, and a backend, responsible for managing all the information, predicting radon levels and issuing alerts using open source technologies. Security is one of the largest challenges for the internet of things, and it is utterly important in the current scenario, given that high radon concentrations pose a health risk. For this reason, this work focuses on securing the entire end-to-end communication path to avoid data forging. The results of this work indicate that the development of a low-cost, yet secured, radon monitoring system is feasible, allowing one to create a network of sensors that can help mitigate the health hazards that high radon concentrations pose. [ABSTRACT FROM AUTHOR]

Indoor air pollution has been ranked among the top five environmental risks to public health. Indoor Air Quality (IAQ) is proven to have significant impacts on people's comfort, health, and performance. Through a systematic literature review in the area of IAQ, two gaps have been identified by this study: short-term monitoring bias and IAQ data-monitoring solution challenges. The study addresses those gaps by proposing an Internet of Things (IoT) and Distributed Ledger Technologies (DLT)-based IAQ data-monitoring system. The developed data-monitoring solution allows for the possibility of low-cost, long-term, real-time, and summarized IAQ information benefiting all stakeholders contributing to define a rich context for Industry 4.0. The solution helps the penetration of Industrial Internet of Things (IIoT)-based monitoring strategies in the specific case of Occupational Safety Health (OSH). The study discussed the corresponding benefits OSH regulation, IAQ managerial, and transparency perspectives based on two case studies conducted in Spain. [ABSTRACT FROM AUTHOR]

A smart campus is an intelligent infrastructure where smart sensors and actuators collaborate to collect information and interact with the machines, tools, and users of a university campus. As in a smart city, a smart campus represents a challenging scenario for Internet of Things (IoT) networks, especially in terms of cost, coverage, availability, latency, power consumption, and scalability. The technologies employed so far to cope with such a scenario are not yet able to manage simultaneously all the previously mentioned demanding requirements. Nevertheless, recent paradigms such as fog computing, which extends cloud computing to the edge of a network, make possible low-latency and location-aware IoT applications. Moreover, technologies such as Low-Power Wide-Area Networks (LPWANs) have emerged as a promising solution to provide low-cost and low-power consumption connectivity to nodes spread throughout a wide area. Specifically, the Long-Range Wide-Area Network (LoRaWAN) standard is one of the most recent developments, receiving attention both from industry and academia. In this article, the use of a LoRaWAN fog computing-based architecture is proposed for providing connectivity to IoT nodes deployed in a campus of the University of A Coruña (UDC), Spain. To validate the proposed system, the smart campus has been recreated realistically through an in-house developed 3D Ray-Launching radio-planning simulator that is able to take into consideration even small details, such as traffic lights, vehicles, people, buildings, urban furniture, or vegetation. The developed tool can provide accurate radio propagation estimations within the smart campus scenario in terms of coverage, capacity, and energy efficiency of the network. The results obtained with the planning simulator can then be compared with empirical measurements to assess the operating conditions and the system accuracy. Specifically, this article presents experiments that show the accurate results obtained by the planning simulator in the largest scenario ever built for it (a campus that covers an area of 26,000 m 2 ), which are corroborated with empirical measurements. Then, how the tool can be used to design the deployment of LoRaWAN infrastructure for three smart campus outdoor applications is explained: a mobility pattern detection system, a smart irrigation solution, and a smart traffic-monitoring deployment. Consequently, the presented results provide guidelines to smart campus designers and developers, and for easing LoRaWAN network deployment and research in other smart campuses and large environments such as smart cities. [ABSTRACT FROM AUTHOR]

The European Space Agency (ESA) Climate Change Initiative (CCI) project combines multi-sensors at different microwave frequencies to derive three harmonized soil moisture products using active, passive and combined approaches. These long-term soil moisture products assist in understanding the global water and carbon cycles. However, extensive validations are a prerequisite before applying the retrieved soil moisture into climatic or hydrological models. To fulfill this objective, we assess the performances of three CCI soil moisture products (active, passive and combined) with respect to in-situ soil moisture networks located in China, Spain and Canada. In order to compensate the scale differences between ground stations and the CCI product's coarse resolution, we adopted two upscaling approaches of Inverse Distance Weighting (IDW) interpolation and simple Arithmetic Mean (AM). The temporal agreements between the satellite retrieved and ground-measured soil moisture were quantified using the unbiased root mean square error (ubRMSE), RMSE, correlation coefficients (R) and bias. Furthermore, the temporal variability of the CCI soil moisture is interpreted and verified with respect to the Tropical Rainfall Measuring Mission (TRMM) precipitation observations. The results show that the temporal variations of CCI soil moisture agreed with the in-situ ground measurements and the precipitation observations over the China and Spain test sites. In contrast, a significant overestimation was observed over the Canada test sites, which may be due to the strong heterogeneity in soil and vegetation characteristics in accordance with the reported poor performance of soil moisture retrieval there. However, despite a retrieval bias, the relatively temporal variation of the CCI soil moisture also followed the ground measurements. For all the three test sites, the soil moisture retrieved from the combined approach outperformed the active-only and passive-only methods, with ubRMSE of 0.034, 0.050, and 0.050–0.054 m3/m3 over the test sites in China, Spain and Canada, respectively. Thus, the CCI combined soil moisture product is suggested to drive the climatic and hydrological studies. [ABSTRACT FROM AUTHOR]

Promoting a tourist destination requires uncovering travel patterns and destination choices, identifying the profile of visitors and analyzing attitudes and preferences of visitors for the city. To this end, tourism-related data are an invaluable asset to understand tourism behaviour, obtain statistical records and support decision-making for business around tourism. In this work, we study the behaviour of tourists visiting top attractions of a city in relation to the tourist influx to restaurants around the attractions. We propose to undertake this analysis by retrieving information posted by visitors in a social network and using an open access map service to locate the tweets in a influence area of the city. Additionally, we present a pattern recognition based technique to differentiate visitors and locals from the collected data from the social network. We apply our study to the city of Valencia in Spain and Berlin in Germany. The results show that, while in Valencia the most frequented restaurants are located near top attractions of the city, in Berlin, it is usually the case that the most visited restaurants are far away from the relevant attractions of the city. The conclusions from this study can be very insightful for destination marketers. [ABSTRACT FROM AUTHOR]