Search

An inkjet-printed, fully passive sensor capable of either humidity or gas sensing is presented herein. The sensor is composed of an interdigitated electrode, a customized printable gas sensitive ink and a specialized dipole antenna for wireless sensing. The interdigitated electrode printed on a paper substrate provides the base conductivity that varies during the sensing process. Aided by the porous nature of the substrate, a change in relative humidity from 18% to 88% decreases the electrode resistance from a few Mega-ohms to the kilo-ohm range. For gas sensing, an additional copper acetate-based customized ink is printed on top of the electrode, which, upon reaction with hydrogen sulphide gas (H2S) changes, both the optical and the electrical properties of the electrode. A fast response time of 3 min is achieved at room temperature for a H2S concentration of 10 ppm at a relative humidity (RH) of 45%. The passive wireless sensing is enabled through an antenna in which the inner loop takes care of conductivity changes in the 4-5 GHz band, whereas the outer-dipole arm is used for chipless identification in the 2-3 GHz band. [ABSTRACT FROM AUTHOR]

The aim of this paper is to discuss the usability of vibrations as energy sources, for the implementation of energy self-sufficient wireless sensing platforms within the Industrial Internet of Things (IIoT) framework. In this context, this paper proposes to equip vibrating assets like machinery with piezoelectric sensors, used to set up energy self-sufficient sensing platforms for hard-to-reach positions. Preliminary measurements as well as extended laboratory tests are proposed to understand the behavior of commercial piezoelectric sensors when employed as energy harvesters. First, a general architecture for a vibration-powered LoRaWAN-based sensor node is proposed. Final tests are then performed to identify an ideal trade-off between sensor sampling rates and energy availability. The target is to ensure continuous operation of the device while guaranteeing a charging trend of the storage component connected to the system. In this context, an Ultra-Low-Power Energy-Harvesting Integrated Circuit plays a crucial role by ensuring the correct regulation of the output with very high efficiency. [ABSTRACT FROM AUTHOR]

The development and growth of Wireless Sensor Networks (WSNs) is significantly propelled by advances in Radio Frequency (RF) and Visible Light Communication (VLC) technologies. This paper endeavors to present a comprehensive review of the state-of-the-art in cognitive hybrid RF-VLC systems for WSNs, emphasizing the critical task of seamlessly integrating Cognitive Radio Sensor Networks (CRSNs) and VLC technologies. The central challenge addressed is the intricate landscape of this integration, characterized by notable trade-offs between performance and complexity, which escalate with the addition of more devices and increased data rates. This scenario necessitates the development of advanced cognitive radio strategies, potentially facilitated by Machine Learning (ML) and Deep Learning (DL) approaches, albeit introducing new complexities such as the necessity for pre-training with extensive datasets. The review scrutinizes the fundamental aspects of CRSNs and VLC, spotlighting key areas like Energy Efficient Resource Allocation, Industrial Scenarios, and Energy Harvesting, and explores the synergistic amalgamation of these technologies as a promising pathway for enhanced spectrum utilization and network performance. By delving into the integration of cognitive radio technology with visible light, this study furnishes valuable insights into the potential for innovative applications in wireless communication, presenting a balanced overview of the current advancements and prospective avenues in the field of cognitive hybrid RF/VLC systems. [ABSTRACT FROM AUTHOR]

The detailed design considerations for the printed RFID-based sensor system is presented in this paper. Starting from material selection and metallization method, this paper discusses types of RFID-based sensors (single- & dual-tag sensor topologies), design procedures, and performance evaluation methods for the wireless sensor system. The electrical properties of the paper substrates (cellulose-based and synthetic papers) and the silver nano-particle-based conductive film are thoroughly characterized for RF applications up to 8 GHz. The reported technology could potentially set the foundation for truly “green”, low-cost, scalable wireless topologies for autonomous Internet-of-Things (IoT), bio-monitoring, and “smart skin” applications. [ABSTRACT FROM AUTHOR]

False data injection attacks (FDIAs) on sensor networks involve injecting deceptive or malicious data into the sensor readings that cause decision-makers to make incorrect decisions, leading to serious consequences. With the ever-increasing volume of data in large-scale sensor networks, detecting FDIAs in large-scale sensor networks becomes more challenging. In this paper, we propose a framework for the distributed detection of FDIAs in large-scale sensor networks. By extracting the spatiotemporal correlation information from sensor data, the large-scale sensors are categorized into multiple correlation groups. Within each correlation group, an autoregressive integrated moving average (ARIMA) is built to learn the temporal correlation of cross-correlation, and a consistency criterion is established to identify abnormal sensor nodes. The effectiveness of the proposed detection framework is validated based on a real dataset from the U.S. smart grid and simulated under both the simple FDIA and the stealthy FDIA strategies. [ABSTRACT FROM AUTHOR]

This paper presents a compact RF energy harvesting wireless sensor node with the antenna, rectifier, energy management circuits, and load integrated on a single printed circuit board and a total size of 53 mm × 59.77 mm × 4.5 mm. By etching rectangular slots in the radiation patch, the antenna area is reduced by 13.9%. The antenna is tested to have an S11 of −24.9 dB at 2.437 GHz and a maximum gain of 4.8 dBi. The rectifier has a maximum RF-to-DC conversion efficiency of 52.53% at 7 dBm input energy. The proposed WSN can achieve self-powered operation at a distance of 13.4 m from the transmitter source. To enhance the conversion efficiency under different input energy densities, this paper establishes an energy model for two operating modes and proposes an energy-intensity adaptive management algorithm. The experiments demonstrated that the proposed WSN can effectively distinguish between the two operating modes based on input energy intensity and realize efficient energy management. [ABSTRACT FROM AUTHOR]

Recent advances in sensor technology are expected to lead to a greater use of wireless sensor networks (WSNs) in industry, logistics, healthcare, etc. On the other hand, advances in artificial intelligence (AI), machine learning (ML), and deep learning (DL) are becoming dominant solutions for processing large amounts of data from edge-synthesized heterogeneous sensors and drawing accurate conclusions with better understanding of the situation. Integration of the two areas WSN and AI has resulted in more accurate measurements, context-aware analysis and prediction useful for smart sensing applications. In this paper, a comprehensive overview of the latest developments in context-aware intelligent systems using sensor technology is provided. In addition, it also discusses the areas in which they are used, related challenges, motivations for adopting AI solutions, focusing on edge computing, i.e., sensor and AI techniques, along with analysis of existing research gaps. Another contribution of this study is the use of a semantic-aware approach to extract survey-relevant subjects. The latter specifically identifies eleven main research topics supported by the articles included in the work. These are analyzed from various angles to answer five main research questions. Finally, potential future research directions are also discussed. [ABSTRACT FROM AUTHOR]

Federated learning (FL) is a machine learning (ML) technique that enables collaborative model training without sharing raw data, making it ideal for Internet of Things (IoT) applications where data are distributed across devices and privacy is a concern. Wireless Sensor Networks (WSNs) play a crucial role in IoT systems by collecting data from the physical environment. This paper presents a comprehensive survey of the integration of FL, IoT, and WSNs. It covers FL basics, strategies, and types and discusses the integration of FL, IoT, and WSNs in various domains. The paper addresses challenges related to heterogeneity in FL and summarizes state-of-the-art research in this area. It also explores security and privacy considerations and performance evaluation methodologies. The paper outlines the latest achievements and potential research directions in FL, IoT, and WSNs and emphasizes the significance of the surveyed topics within the context of current technological advancements. [ABSTRACT FROM AUTHOR]

Wireless Sensor Networks (WSNs) have emerged as an efficient solution for numerous real-time applications, attributable to their compactness, cost-effectiveness, and ease of deployment. The rapid advancement of 5G technology and mobile edge computing (MEC) in recent years has catalyzed the transition towards large-scale deployment of WSN devices. However, the resulting data proliferation and the dynamics of communication environments introduce new challenges for WSN communication: (1) ensuring robust communication in adverse environments and (2) effectively alleviating bandwidth pressure from massive data transmission. In response to the aforementioned challenges, this paper proposes a semantic communication solution. Specifically, considering the limited computational and storage resources of WSN devices, we propose a flexible Attention-based Adaptive Coding (AAC) module. This module integrates window and channel attention mechanisms, dynamically adjusts semantic information in response to the current channel state, and facilitates adaptation of a single model across various Signal-to-Noise Ratio (SNR) environments. Furthermore, to validate the effectiveness of this approach, the paper introduces an end-to-end Joint Source Channel Coding (JSCC) scheme for image semantic communication, employing the AAC module. Experimental results demonstrate that the proposed scheme surpasses existing deep JSCC schemes across datasets of varying resolutions; furthermore, they validate the efficacy of the proposed AAC module, which is capable of dynamically adjusting critical information according to the current channel state. This enables the model to be trained over a range of SNRs and obtain better results. [ABSTRACT FROM AUTHOR]

A sinkhole attack is characterized by low difficulty to launch, high destructive power, and difficulty to detect and defend. It is a common attack mode for wireless sensor networks. This paper proposes a sinkhole attack detection and defense strategy integrating SPA and Jaya algorithms in wireless sensor networks (WSNs). Then, combined with the SPA trust model, the trust values of suspicious nodes were calculated, and the attack nodes were detected. The Jaya algorithm was adopted to avoid the attacked area so that nodes can find the route to communicate with the real Sink, and attack nodes are isolated in the network to improve the capabilities of network directional defense. The simulation results show that the improved detection algorithm can effectively detect malicious nodes in the network, and the defense strategy implemented in the attacked area can improve the packet delivery rate, reduce network delay and energy consumption, and improve the security and reliability of wireless sensor networks. [ABSTRACT FROM AUTHOR]

In this paper, a novel dual band frequency reconfigurable antenna using an origami magic cube is proposed for wireless sensor network (WSN) applications. The proposed origami antenna consists of a meandered monopole folded onto three sides of the magic cube. A microstrip open-ended stub is loaded on the meandered monopole. The proposed origami magic cube can be mechanically folded and unfolded. The proposed antenna operates at 1.57 GHZ and 2.4 GHz in the folded state. In the unfolded state, the proposed antenna operates at 900 MHz and 2.3 GHz. The resonant frequency of the second band can be tunable by varying the length and position of the open stub. The origami magic cube is built on paper. Its performance is numerically and experimentally demonstrated from S-parameters and radiation patterns. The measured 10 dB impedance bandwidth of the proposed origami antenna is 18% (900-1120 MHz) and 15% (2.1-2.45 GHz) for the unfolded state and 20% (1.3-1.6 GHz) and 14% (2.3-2.5 GHz) for the folded state. The measured peak gain at 900 MHz and 2.3 GHz are 1.1 dBi and 2.32 dBi, respectively, in the unfolded state. The measured peak gain at 1.5 GHz and 2.4 GHz are 3.28 dBi and 1.98 dBi, respectively, in the folded state. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSNs), integral components underpinning the infrastructure of the internet of things (IoT), confront escalating threats originating from attempts at malicious jamming. Nevertheless, the limited nature of the hardware resources in distributed, low-cost WSNs, such as those for computing power and storage, poses a challenge when implementing complex and intelligent anti-jamming algorithms like deep reinforcement learning (DRL). Hence, in this paper a rapid anti-jamming method is proposed based on imitation learning in order to address this issue. First, on-network nodes obtain expert anti-jamming trajectories using heuristic algorithms, taking historical experiences into account. Second, an RNN neural network that can be used for anti-jamming decision making is trained by mimicking these expert trajectories. Finally, the late-access network nodes receive anti-jamming network parameters from the existing nodes, allowing them to obtain a policy network directly applicable to anti-jamming decision making and thus avoiding redundant learning. Experimental results demonstrate that, compared with traditional Q-learning and random frequency-hopping (RFH) algorithms, the imitation learning-based algorithm empowers late-access network nodes to swiftly acquire anti-jamming strategies that perform on par with expert strategies. [ABSTRACT FROM AUTHOR]

Q-rung orthopair fuzzy sets have been proven to be highly effective at handling uncertain data and have gained importance in decision-making processes. Torra's hesitant fuzzy model, on the other hand, offers a more generalized approach to fuzzy sets. Both of these frameworks have demonstrated their efficiency in decision algorithms, with numerous scholars contributing established theories to this research domain. In this paper, recognizing the significance of these frameworks, we amalgamated their principles to create a novel model known as Q-rung orthopair hesitant fuzzy sets. Additionally, we undertook an exploration of Aczel–Alsina aggregation operators within this innovative context. This exploration resulted in the development of a series of aggregation operators, including Q-rung orthopair hesitant fuzzy Aczel–Alsina weighted average, Q-rung orthopair hesitant fuzzy Aczel–Alsina ordered weighted average, and Q-rung orthopair hesitant fuzzy Aczel–Alsina hybrid weighted average operators. Our research also involved a detailed analysis of the effects of two crucial parameters: λ , associated with Aczel–Alsina aggregation operators, and N, related to Q-rung orthopair hesitant fuzzy sets. These parameter variations were shown to have a profound impact on the ranking of alternatives, as visually depicted in the paper. Furthermore, we delved into the realm of Wireless Sensor Networks (WSN), a prominent and emerging network technology. Our paper comprehensively explored how our proposed model could be applied in the context of WSNs, particularly in the context of selecting the optimal gateway node, which holds significant importance for companies operating in this domain. In conclusion, we wrapped up the paper with the authors' suggestions and a comprehensive summary of our findings. [ABSTRACT FROM AUTHOR]

Multihop transmission is one of the important techniques to overcome the transmission coverage of each node in wireless sensor networks (WSNs). However, multihop transmission has a security issue due to the nature of a wireless medium. Additionally, the eavesdropper also attempts to interrupt the legitimate users' transmission. Thus, in this paper, we study the secrecy performance of a multihop transmission under various eavesdropping attacks for WSNs. To improve the secrecy performance, we propose two node selection schemes in each cluster, namely, minimum node selection (MNS) and optimal node selection (ONS) schemes. To exploit the impact of the network parameters on the secrecy performance, we derive the closed-form expression of the secrecy outage probability (SOP) under different eavesdropping attacks. From the numerical results, the ONS scheme shows the most robust secrecy performance compared with the other schemes. However, the ONS scheme requires a lot of channel information to select the node in each cluster and transmit information. On the other side, the MNS scheme can reduce the amount of channel information compared with the ONS scheme, while the MNS scheme still provides secure transmission. In addition, the impact of the network parameters on the secrecy performance is also insightfully discussed in this paper. Moreover, we evaluate the trade-off of the proposed schemes between secrecy performance and computational complexity. [ABSTRACT FROM AUTHOR]

With the rapid development of the Internet of Things (IoT) and wireless sensor networks (WSN), the modern world requires advanced solutions for the wireless powering of low-power autonomous devices. The present study addresses the wireless power transfer (WPT) efficiency problem by exploiting a multi-hop concept-based technique to increase the received power at the end sensor node (ESN). The current work adopts efficient multi-hop technology from the communications field to examine its impact on WPT performance. The investigation involves power transfer modeling and experimental measurements in a sub-GHz frequency range, chosen for being capable of providing a greater distance to transmit power. The paper proposes a multi-hop (MH) WPT concept based on signal amplification and demonstrates the fabricated multi-hop node (MHN) prototype. The experimental verification of the MHN is performed in the laboratory environment. The present paper examines two WPT scenarios: line-of-sight (LoS) and non-line-of-sight (NLoS). The turn-on angle of 90 degrees on MHN is used for the NLoS case. The received power and RF-DC converted voltage on the ESN are measured for all investigated scenarios. Moreover, the paper proposes an efficient simulation approach for the performance evaluation of MH WPT technology, providing an opportunity to analyze and optimize wireless sensor nodes' spatial distribution to increase the received power. [ABSTRACT FROM AUTHOR]

Recently, there has been increased interest in adopting novel sensing technologies for continuously monitoring structural systems. In this respect, micro-electrical mechanical system (MEMS) sensors are widely used in several applications, including structural health monitoring (SHM), in which accelerometric samples are acquired to perform modal analysis. Thanks to their significantly lower cost, ease of installation in the structure, and lower power consumption, they enable extensive, pervasive, and battery-less monitoring systems. This paper presents an innovative high-performance device for SHM applications, based on a low-noise triaxial MEMS accelerometer, providing a guideline and insightful results about the opportunities and capabilities of these devices. Sensor nodes have been designed, developed, and calibrated to meet structural vibration monitoring and modal identification requirements. These components include a protocol for reliable command dissemination through network and data collection, and improvements to software components for data pipelining, jitter control, and high-frequency sampling. Devices were tested in the lab using shaker excitation. Results demonstrate that MEMS-based accelerometers are a feasible solution to replace expensive piezo-based accelerometers. Deploying MEMS is promising to minimize sensor node energy consumption. Time and frequency domain analyses show that MEMS can correctly detect modal frequencies, which are useful parameters for damage detection. The acquired data from the test bed were used to examine the functioning of the network, data transmission, and data quality. The proposed architecture has been successfully deployed in a real case study to monitor the structural health of the Marcus Aurelius Exedra Hall within the Capitoline Museum of Rome. The performance robustness was demonstrated, and the results showed that the wired sensor network provides dense and accurate vibration data for structural continuous monitoring. [ABSTRACT FROM AUTHOR]

With the emergence of wireless rechargeable sensor networks (WRSNs), the possibility of wirelessly recharging nodes using mobile charging vehicles (MCVs) has become a reality. However, existing approaches overlook the effective integration of node energy replenishment and mobile data collection processes. In this paper, we propose a joint energy replenishment and data collection scheme (D-JERDG) for WRSNs based on deep reinforcement learning. By capitalizing on the high mobility of unmanned aerial vehicles (UAVs), D-JERDG enables continuous visits to the cluster head nodes in each cluster, facilitating data collection and range-based charging. First, D-JERDG utilizes the K-means algorithm to partition the network into multiple clusters, and a cluster head selection algorithm is proposed based on an improved dynamic routing protocol, which elects cluster head nodes based on the remaining energy and geographical location of the cluster member nodes. Afterward, the simulated annealing (SA) algorithm determines the shortest flight path. Subsequently, the DRL model multiobjective deep deterministic policy gradient (MODDPG) is employed to control and optimize the UAV instantaneous heading and speed, effectively planning UAV hover points. By redesigning the reward function, joint optimization of multiple objectives such as node death rate, UAV throughput, and average flight energy consumption is achieved. Extensive simulation results show that the proposed D-JERDG achieves joint optimization of multiple objectives and exhibits significant advantages over the baseline in terms of throughput, time utilization, and charging cost, among other indicators. [ABSTRACT FROM AUTHOR]

RPL—Routing Protocol for Low-Power and Lossy Networks (usually pronounced "ripple")—is the de facto standard for IoT networks. However, it neglects to exploit IoT devices' full capacity to optimize their transmission power, mainly because it is quite challenging to do so in parallel with the routing strategy, given the dynamic nature of wireless links and the typically constrained resources of IoT devices. Adapting the transmission power requires dynamically assessing many parameters, such as the probability of packet collisions, energy consumption, the number of hops, and interference. This paper introduces Adaptive Control of Transmission Power for RPL (ACTOR) for the dynamic optimization of transmission power. ACTOR aims to improve throughput in dense networks by passively exploring different transmission power levels. The classic solutions of bandit theory, including the Upper Confidence Bound (UCB) and Discounted UCB, accelerate the convergence of the exploration and guarantee its optimality. ACTOR is also enhanced via mechanisms to blacklist undesirable transmission power levels and stabilize the topology of parent–child negotiations. The results of the experiments conducted on our 40-node, 12-node testbed demonstrate that ACTOR achieves a higher packet delivery ratio by almost 20%, reduces the transmission power of nodes by up to 10 dBm, and maintains a stable topology with significantly fewer parent switches compared to the standard RPL and the selected benchmarks. These findings are consistent with simulations conducted across 7 different scenarios, where improvements in end-to-end delay, packet delivery, and energy consumption were observed by up to 50%. [ABSTRACT FROM AUTHOR]

The moisture content within the concrete pore network significantly influences the mechanical, thermal, and durability characteristics of concrete structures. This paper introduces a novel fully embedded wireless temperature and relative humidity sensor connected to an automatic acquisition system designed for continuous concrete monitoring. Relative humidity measurements from this new sensor are compared with those obtained by a commercial system based on the borehole method at different depths (2.5 and 4.0 cm) and exposure conditions (oven drying and humid chamber). The results allow for proving that both systems provide consistent internal relative humidity measurements aligned with the exposure conditions and highlight the capability of fully embedded wireless sensors as a practical and reliable alternative to the conventional borehole method. Additionally, the continuous monitoring of the wireless cast-in sensor exhibits reliability during unintended temperature fluctuations, emphasizing the effectiveness of permanently installed sensors in promptly detecting unintended curing variations in real time. The continuous real-time information provided combined with the practicality of these sensors might assist construction managers to improve the quality control of the concrete curing process and shrinkage behavior, and ensure the integrity of concrete surface finishing. [ABSTRACT FROM AUTHOR]

The fast development of the sensors in the wireless sensor networks (WSN) brings a big challenge of low energy consumption requirements, and Peer-to-peer (P2P) communication becomes the important way to break this bottleneck. However, the interference caused by different sensors sharing the spectrum and the power limitations seriously constrains the improvement of WSN. Therefore, in this paper, we proposed a deep reinforcement learning-based energy consumption optimization for P2P communication in WSN. Specifically, P2P sensors (PUs) are considered agents to share the spectrum of authorized sensors (AUs). An authorized sensor has permission to access specific data or systems, while a P2P sensor directly communicates with other sensors without needing a central server. One involves permission, the other is direct communication between sensors. Each agent can control the power and select the resources to avoid interference. Moreover, we use a double deep Q network (DDQN) algorithm to help the agent learn more detailed features of the interference. Simulation results show that the proposed algorithm can obtain a higher performance than the deep Q network scheme and the traditional algorithm, which can effectively lower the energy consumption for P2P communication in WSN. [ABSTRACT FROM AUTHOR]

This paper describes the successes and failures after 4 years of continuous operation of a network of sensors, communicating nodes, and gateways deployed on the Etna Volcano in Sicily since 2019, including a period of Etna intense volcanic activity that occurred in 2021 and resulted in over 60 paroxysms. It documents how the installation of gateways at medium altitude allowed for data collection from sensors up to the summit craters. Most of the sensors left on the volcanic edifice during winters and during this period of intense volcanic activity were destroyed, but the whole gateway infrastructure remained fully operational, allowing for a very fruitful new field campaign two years later, in August 2023. Our experience has shown that the best strategy for IoT deployment on very active and/or high-altitude volcanoes like Etna is to permanently install gateways in areas where they are protected both from meteorological and volcanic hazards, that is mainly at the foot of the volcanic edifice, and to deploy temporary sensors and communicating nodes in the more exposed areas during field trips or in the summer season. [ABSTRACT FROM AUTHOR]

In this paper, we propose an improved clustering algorithm for wireless sensor networks (WSNs) that aims to increase network lifetime and efficiency. We introduce an enhanced fuzzy spider monkey optimization technique and a hidden Markov model-based clustering algorithm for selecting cluster heads. Our approach considers factors such as network cluster head energy, cluster head density, and cluster head position. We also enhance the energy-efficient routing strategy for connecting cluster heads to the base station. Additionally, we introduce a polling control method to improve network performance while maintaining energy efficiency during steady transmission periods. Simulation results demonstrate a 1.2% improvement in network performance using our proposed model. [ABSTRACT FROM AUTHOR]

Unequivocal change in the climate system has put coastal regions around the world at increasing risk from climate-related hazards. Monitoring the coast is often difficult and expensive, resulting in sparse monitoring equipment lacking in sufficient temporal and spatial coverage. Thus, low-cost methods to monitor the coast at finer temporal and spatial resolution are imperative for climate resilience along the world's coasts. Exploiting such low-cost methods for the development of early warning support could be invaluable to coastal settlements. This paper aims to provide the most up-to-date low-cost techniques developed and used in the last decade for monitoring coastal hazards and their forcing agents via systematic review of the peer-reviewed literature in three scientific databases: Scopus, Web of Science and ScienceDirect. A total of 60 papers retrieved from these databases through the preferred reporting items for systematic reviews and meta-analyses (PRISMA) protocol were analysed in detail to yield different categories of low-cost sensors. These sensors span the entire domain for monitoring coastal hazards, as they focus on monitoring coastal zone characteristics (e.g., topography), forcing agents (e.g., water levels), and the hazards themselves (e.g., coastal flooding). It was found from the meta-analysis of the retrieved papers that terrestrial photogrammetry, followed by aerial photogrammetry, was the most widely used technique for monitoring different coastal hazards, mainly coastal erosion and shoreline change. Different monitoring techniques are available to monitor the same hazard/forcing agent, for instance, unmanned aerial vehicles (UAVs), time-lapse cameras, and wireless sensor networks (WSNs) for monitoring coastal morphological changes such as beach erosion, creating opportunities to not only select but also combine different techniques to meet specific monitoring objectives. The sensors considered in this paper are useful for monitoring the most pressing challenges in coastal zones due to the changing climate. Such a review could be extended to encompass more sensors and variables in the future due to the systematic approach of this review. This study is the first to systematically review a wide range of low-cost sensors available for the monitoring of coastal zones in the context of changing climate and is expected to benefit coastal researchers and managers to choose suitable low-cost sensors to meet their desired objectives for the regular monitoring of the coast to increase climate resilience. [ABSTRACT FROM AUTHOR]

Machine learning (ML) and deep learning (DL), in particular, are common tools for anomaly detection (AD). With the rapid increase in the number of Internet-connected devices, the growing desire for Internet of Things (IoT) devices in the home, on our person, and in our vehicles, and the transition to smart infrastructure and the Industrial IoT (IIoT), anomaly detection in these devices is critical. This paper is a survey of anomaly detection in sensor networks/the IoT. This paper defines what an anomaly is and surveys multiple sources based on those definitions. The goal of this survey was to highlight how anomaly detection is being performed on the Internet of Things and sensor networks, identify anomaly detection approaches, and outlines gaps in the research in this domain. [ABSTRACT FROM AUTHOR]

Accurate state-of-charge (SOC) estimation is essential for maximizing the lifetime of battery-powered wireless sensor networks (WSNs). Lightweight estimation methods are widely used in WSNs due to their low measurement and computation requirements. However, accuracy of existing lightweight methods is not high, and their adaptability to different batteries and working conditions is relatively poor. This paper proposes a lightweight SOC estimation method, which applies Peukert's Law to estimate the effective capacity of the battery and then calculates the SOC by subtracting the cumulative current consumption from the estimated capacity. In order to evaluate the proposed method comprehensively, different primary batteries and working conditions (constant current, constant resistance, and emulated duty-cycle loads) are employed. Experimental results show that the proposed method is superior to existing methods for different batteries and working conditions, which mainly benefits from the ability of Peukert's Law to better model the rate-capacity effect of the batteries. [ABSTRACT FROM AUTHOR]

LPWANs are a promising solution for wireless sensor networks. To compete with such widespread technologies as LoRaWAN and Sigfox, recently a new LPWAN technology called NB-Fi has been developed. In a short time, many NB-Fi networks have been deployed in various countries. Although NB-Fi, Sigfox, and LoRaWAN have been designed for similar applications, they implement different approaches. However, no detailed comparisons of them are present in academic literature. This paper aims to fill this gap by analyzing and comparing NB-Fi, Sigfox, and LoRaWAN focusing on performance evaluation results rather than just nominal parameters declared by the developers. Specifically, the paper evaluates the packet loss rate, packet error rate, and average delay in these networks in different scenarios. The results are used to provide guidelines to decide which technology to use under which conditions. Specifically, Sigfox performs best in scenarios when devices transmit small pieces of data without repetitions and acknowledgments, and LoRaWAN is the most reliable for transmitting bigger pieces of data, while NB-Fi is best suited for acknowledged transmissions of small pieces of data. [ABSTRACT FROM AUTHOR]

Efficient routing is essential for the proper functioning of wireless sensor networks (WSNs). Recent research has focused on optimizing energy and delay for these networks. Nevertheless, there is a dearth of studies that have examined the effects of volatile settings, such as chemical plants, coal mines, nuclear power plants, and battlefields, where connectivity is inconsistent. In such contexts, sensor networks may face security incidents, and environmental factors such as node movement and death can result in dynamic changes to the network topology. A novel design algorithm grounded on Dynamic Minimum Hop Selection (DMHS) was introduced in this paper. The key principle behind DMHS is to use a probabilistic forwarding decision-making process through a distributed route discovery strategy that utilizes dynamically adjusted minimum hop counts of nodes. Simulation results indicate that the life cycle of the DMHS algorithm increases by more than 12% over 700 nodes when compared to the traditional energy-saving algorithm. Furthermore, our algorithm performs better in the average delivery rate of node, and has a 10% to 21% improvement compared to the other algorithms. Overall, the DMHS algorithm represents an important contribution to the development of WSNs that can function robustly in high-risk and unstable environments. [ABSTRACT FROM AUTHOR]

The 11 papers published in this issue cover various aspects of wireless communication and networking systems, including communication protocols, security considerations, and novel applications. Wireless communication technologies have continuously advanced and transformed the way people interact and communicate, from the development of the telegraph and radio broadcasting to the emergence of television and mobile phones. Radio, television, satellite communication, mobile phones, the Internet of Things (IoT), wireless networks, and many more fields have all become reliant on wireless telecommunication technologies. Conclusions This Special Issue provides a comprehensive overview of the advancements in and potential of intelligent solutions in the field of wireless communication and networking systems. [Extracted from the article]

Sensor networks, as a special subtype of wireless networks, consist of sets of wirelessly connected sensor nodes often placed in hard-to-reach environments. Therefore, it is expected that sensor nodes will not be powered from the power grid. Instead, sensor nodes have their own power sources, the replacement of which is often impractical and requires additional costs, so it is necessary to ensure minimum energy consumption. For that reason, the energy efficiency of wireless sensor networks used for monitoring environmental parameters is essential, especially in remote networking scenarios. In this paper, an overview of the latest research progress on wireless sensor networks based on LoRa was provided. Furthermore, analyses of energy consumption of sensor nodes used in agriculture to observe environmental parameters were conducted using the results of real measurements in the field, as well as simulations carried out based on collected data about real equipment. Optimization methods of energy consumption, in terms of choosing the appropriate data collection processes from the conducted field measurements, as well as the settings of network radio parameters imitating real conditions used in conducted simulations were highlighted. In the analyses, special emphasis was placed on choosing the optimal packet size. Unlike in other papers analyzing energy efficiency of LoRa communication, in this paper, it was proven that the adjustment of the transmission speed to the actual size of the packet is important for better energy efficiency of communication and that it can reduce energy consumption considerably. Moreover, in the paper, the contents of a packet that can be used in precision agriculture is suggested in order to prove that the 6-bit packet is sufficient for energy-efficient collection of parameters from the environment, in contrast to the 11-bit packets used in standard commercially available equipment. [ABSTRACT FROM AUTHOR]

Blockchain technology is an information security solution that operates on a distributed ledger system. Blockchain technology has considerable potential for securing Internet of Things (IoT) low-powered devices. However, the integration of IoT and blockchain technologies raises a number of research issues. One of the most important is the energy consumption of different blockchain algorithms. Because IoT devices are typically low-powered battery-powered devices, the energy consumption of any blockchain node must be kept low. IoT end nodes are typically low-powered devices expected to survive for extended periods without battery replacement. Energy consumption of blockchain algorithms is an important consideration in any application that combines both technologies, as some blockchain algorithms are infeasible because they consume large amounts of energy, causing the IoT device to reach high temperatures and potentially damaging the hardware; they are also a possible fire hazard. In this paper, we examine the temperatures reached in devices used to process blockchain algorithms, and the energy consumption of three commonly used blockchain algorithms running on low-powered microcontrollers communicating in a wireless sensor network. We found temperatures of IoT devices and energy consumption were highly correlated with the temperatures reached. The results indicate that device temperatures reached 80 °C. This work will contribute to developing energy-efficient blockchain-based IoT sensor networks. [ABSTRACT FROM AUTHOR]

The latest version of ZigBee offers improvements in various aspects, including its low power consumption, flexibility, and cost-effective deployment. However, the challenges persist, as the upgraded protocol continues to suffer from a wide range of security weaknesses. Constrained wireless sensor network devices cannot use standard security protocols such as asymmetric cryptography mechanisms, which are resource-intensive and unsuitable for wireless sensor networks. ZigBee uses the Advanced Encryption Standard (AES), which is the best recommended symmetric key block cipher for securing data of sensitive networks and applications. However, AES is expected to be vulnerable to some attacks in the near future. Moreover, symmetric cryptosystems have key management and authentication issues. To address these concerns in wireless sensor networks, particularly in ZigBee communications, in this paper, we propose a mutual authentication scheme that can dynamically update the secret key value of device-to-trust center (D2TC) and device-to-device (D2D) communications. In addition, the suggested solution improves the cryptographic strength of ZigBee communications by improving the encryption process of a regular AES without the need for asymmetric cryptography. To achieve that, we use a secure one-way hash function operation when D2TC and D2D mutually authenticate each other, along with bitwise exclusive OR operations to enhance cryptography. Once authentication is accomplished, the ZigBee-based participants can mutually agree upon a shared session key and exchange a secure value. This secure value is then integrated with the sensed data from the devices and utilized as input for regular AES encryption. By adopting this technique, the encrypted data gains robust protection against potential cryptanalysis attacks. Finally, a comparative analysis is conducted to illustrate how the proposed scheme effectively maintains efficiency in comparison to eight competitive schemes. This analysis evaluates the scheme's performance across various factors, including security features, communication, and computational cost. [ABSTRACT FROM AUTHOR]

In this paper, a detailed review of microcontroller unit (MCU)-based wireless sensor node platforms from recently published research articles is presented. Despite numerous research efforts in the fast-growing field of wireless sensor devices, energy consumption remains a challenge that limits the lifetime of wireless sensor networks (WSNs). The Internet-of-Things (IoT) technology utilizes WSNs for providing an efficient sensing and communication infrastructure. Thus, a comparison of the existing wireless sensor nodes is crucial. Of particular interest are the advances in the recent MCU-based wireless sensor node platforms, which have become diverse and fairly advanced in relation to the currently available commercial WSN platforms. The recent wireless sensor nodes are compared with commercially available motes. The commercially available motes are selected based on a number of criteria including popularity, published results, interesting characteristics and features. Of particular interest is to understand the trajectory of development of these devices and the technologies so as to inform the research and application directions. The comparison is mainly based on processing and memory specifications, communication capabilities, power supply and consumption, sensor support, potential applications, node programming and hardware security. This paper attempts to provide a clear picture of the progress being made towards the design of autonomous wireless sensor nodes to avoid redundancy in research by industry and academia. This paper is expected to assist developers of wireless sensor nodes to produce improved designs that outperform the existing motes. Besides, this paper will guide researchers and potential users to easily make the best choice of a mote that best suits their specific application scenarios. A discussion on the wireless sensor node platforms is provided, and challenges and future research directions are also outlined. [ABSTRACT FROM AUTHOR]

In this paper, in order to solve the problem of wireless sensor networks' reliable transmission in intelligent malicious jamming, we propose a Distributed Anti-Jamming Algorithm (DAJA) based on an actor–critic algorithm for a multi-agent system. The Multi-Agent Markov Decision Process (MAMPD) is introduced to model the progress of wireless sensor networks' anti-jamming communication, and the multi-agent system learns the intelligent jamming from the external environment by using an actor–critic algorithm. On the basis of coping with the influence of external and internal factors effectively, each sensor in networks selects the appropriate channels for transmission and finally realizes the optimal transmission of the system overall in a unit time period. In the environment of probabilistic intelligent jamming with tracking properties set in this paper, the simulation shows that the algorithm proposed can outperform the algorithm based on joint Q-learning and the conventional scheme based on orthogonal frequency hopping in terms of transmission. In addition, the proposed algorithm completes two updates of strategy evaluation and action selection in one iteration, which means that the system has higher efficiency of action selection and better adaptability to the environment through the interaction with the external environment, resulting in the better performance of transmission and convergence. [ABSTRACT FROM AUTHOR]

This paper delves into the application of vibration-based energy harvesting to power environmental sensor nodes, a critical component of modern data collection systems. These sensor nodes play a crucial role in structural health monitoring, providing essential data on external conditions that can affect the health and performance of structures. We investigate the feasibility and efficiency of utilizing piezoelectric vibration energy harvesters to sustainably power environmental wireless sensor nodes on the one hand. On the other hand, we exploit different approaches to minimize the sensor node's power consumption and maximize its efficiency. The investigations consider various sensor node platforms and assess their performance under different voltage levels and broadcast frequencies. The findings reveal that optimized harvester designs enable real-time data broadcasting with short intervals, ranging from 1 to 3 s, expanding the horizons of environmental monitoring, and show that in case the system includes a battery as a backup plan, the battery's lifetime can be extended up to 9 times. This work underscores the potential of vibration energy harvesting as a viable solution for powering sensor nodes, enhancing their autonomy, and reducing maintenance costs in remote and challenging environments. It opens doors to broader applications of sustainable energy sources in environmental monitoring and data collection systems. [ABSTRACT FROM AUTHOR]

This paper studies the security and reliability of the power splitting (PS)-based relaying in the Internet of Things (IoT) networks with the help of a jammer. Based on the considered system model, we derive outage probability (OP) and intercept probability (IP) under two distinguished schemes, namely, the static PS relaying (SPSR) scheme and the dynamic PS relaying (DPSR) scheme. More precisely, the PS ratio of the former is a constant number, while the latter is optimally adjusted in order to minimize the OP and counts only on the channel gain of the second hop. Numerical results are provided to not only verify the accuracy of the proposed mathematical framework but also identify the trends of both OP and IP with respect to several important parameters. Our findings unveil that the OP and IP have contradictory behavior with respect to the transmit power and number of sources. Moreover, the performance of the DPSR scheme is superior to that of the SPSR scheme. [ABSTRACT FROM AUTHOR]

Studying soil composition is vital for agricultural and edaphology disciplines. Presently, colorimetry serves as a prevalent method for the on-site visual examination of soil characteristics. However, this technique necessitates the laboratory-based analysis of extracted soil fragments by skilled personnel, leading to substantial time and resource consumption. Contrastingly, sensor techniques effectively gather environmental data, though they mostly lack in situ studies. Despite this, sensors offer substantial on-site data generation potential in a non-invasive manner and can be included in wireless sensor networks. Therefore, the aim of the paper is to develop a low-cost red, green, and blue (RGB)-based sensor system capable of detecting changes in the composition of the soil. The proposed sensor system was found to be effective when the sample materials, including salt, sand, and nitro phosphate, were determined under eight different RGB lights. Statistical analyses showed that each material could be classified with significant differences based on specific light variations. The results from a discriminant analysis documented the 100% prediction accuracy of the system. In order to use the minimum number of colors, all the possible color combinations were evaluated. Consequently, a combination of six colors for salt and nitro phosphate successfully classified the materials, whereas all the eight colors were found to be effective for classifying sand samples. The proposed low-cost RGB sensor system provides an economically viable and easily accessible solution for soil classification. [ABSTRACT FROM AUTHOR]

Indoor localization of a mobile target represents a prominent application within wireless sensor network (WSN), showcasing significant values and scientific interest. Interference, obstacles, and energy consumption are critical challenges for indoor applications and battery replacements. A proposed tracking system deals with several factors such as latency, energy consumption, and accuracy presenting an innovative solution for the mobile localization application. In this paper, a novel algorithm introduces a self-localization algorithm for mobile targets using the wake-up media access control (MAC) protocol. The developed tracking application is based on the trilateration technique with received signal strength indication (RSSI) measurements. Simulations are implemented in the objective modular network testbed in C++ (OMNeT++) discrete event simulator using the C++ programming language, and the RSSI values introduced are based on real indoor measurements. In addition, a determination approach for finding the optimal parameters of RSSI is assigned to implement for the simulation parameters. Simulation results show a significant reduction in power consumption and exceptional accuracy, with an average error of 1.91 m in 90% of cases. This method allows the optimization of overall energy consumption, which consumes only 2.69% during the localization of 100 different positions. [ABSTRACT FROM AUTHOR]

Nowadays, the Industry 4.0 concept and the Industrial Internet of Things (IIoT) are considered essential for the implementation of automated manufacturing processes across various industrial settings. In this regard, wireless sensor networks (WSN) are crucial due to their inherent mobility, easy deployment and maintenance, scalability, and low power consumption, among other benefits. In this context, the presented paper proposes an optimized and low-cost WSN based on ZigBee communication technology for the monitoring of a real manufacturing facility. The company designs and manufactures solar protection curtains and aims to integrate the deployed WSN into the Enterprise Resource Planning (ERP) system in order to optimize their production processes and enhance production efficiency and cost estimation capabilities. To achieve this, radio propagation measurements and 3D ray launching simulations were conducted to characterize the wireless channel behavior and facilitate the development of an optimized WSN system that can operate in the complex industrial environment presented and validated through on-site wireless channel measurements, as well as interference analysis. Then, a low-cost WSN was implemented and deployed to acquire real-time data from different machinery and workstations, which will be integrated into the ERP system. Multiple data streams have been collected and processed from the shop floor of the factory by means of the prototype wireless nodes implemented. This integration will enable the company to optimize its production processes, fabricate products more efficiently, and enhance its cost estimation capabilities. Moreover, the proposed system provides a scalable platform, enabling the integration of new sensors as well as information processing capabilities. [ABSTRACT FROM AUTHOR]

Underwater acoustic sensor networks (UASNs) are critical to a range of applications from oceanographic data collection to submarine surveillance. In these networks, efficient energy management is critical due to the limited power resources of underwater sensors. The LEACH protocol, a popular cluster-based protocol, has been widely used in UASNs to minimize energy consumption. Despite its widespread use, the conventional LEACH protocol faces challenges such as an unoptimized cluster number and low transmission efficiency, which hinder its performance. This paper proposes an improved LEACH protocol for cluster-based UASNs, where the cluster number is optimized with an underwater energy propagation model to reduce energy consumption, and a transmission scheduling algorithm is also employed to achieve conflict-free parallel data transmission. Replication computing is introduced to the LEACH protocol to reduce the signaling in the clustering and data transmission phases. The simulation results show that the proposed protocol outperforms several conventional methods in terms of normalized average residual energy, average number of surviving nodes, average round when the first death node occurs, and the number of packets received by the base station. [ABSTRACT FROM AUTHOR]

Wireless sensor network (WSN) underpinning the smart-grid Internet of Things (SG-IoT) has been a popular research topic in recent years due to its great potential for enabling a wide range of important applications. However, the energy consumption (EC) characteristic of sensor nodes is a key factor that affects the operational performance (e.g., lifetime of sensors) and the total cost of ownership of WSNs. In this paper, to find the modulation techniques suitable for WSNs, we investigate the EC characteristic of continuous phase modulation (CPM), which is an attractive modulation scheme candidate for WSNs because of its constant envelope property. We first develop an EC model for the sensor nodes of WSNs by considering the circuits and a typical communication protocol that relies on automatic repeat request (ARQ)-based retransmissions to ensure successful data delivery. Then, we use this model to analyze the EC characteristic of CPM under various configurations of modulation parameters. Furthermore, we compare the EC characteristic of CPM with that of other representative modulation schemes, such as offset quadrature phase-shift keying (OQPSK) and quadrature amplitude modulation (QAM), which are commonly used in communication protocols of WSNs. Our analysis and simulation results provide insights into the EC characteristics of multiple modulation schemes in the context of WSNs; thus, they are beneficial for designing energy-efficient SG-IoT in the beyond-5G (B5G) and the 6G era. [ABSTRACT FROM AUTHOR]

The optimization of network topology is crucial to achieve efficient data transmission in wireless sensor networks. Recently it has been proven that emerging open data sources can be used for modeling the structures of heterogeneous urban sensor networks. With this, leveraging real location data of various networked and sensing devices became feasible and essential. This approach enables the construction and analysis of more accurate representations based on frequently updated actual network infrastructure topology data, as opposed to using synthetic models or test environments. The presented modeling method serves as the basis for the designed architecture and implemented research environment. This paper introduces a set of algorithms which transform devices' location data into graph-based wireless network connectivity models. Each algorithm is thoroughly discussed and evaluated. Moreover, static (momentary) and dynamic (time-spanning) network topologies are constructed in four large Polish cities based on publicly available data. Multidimensional simulation-based analysis is conducted to investigate the characteristics of the modeled structures. Directions for further research are suggested as well. [ABSTRACT FROM AUTHOR]

The modernization of logistics through the use of Wireless Sensor Network (WSN) Internet of Things (IoT) devices promises great efficiencies. Sensor devices can provide real-time or near real-time condition monitoring and location tracking of assets during the shipping process, helping to detect delays, prevent loss, and stop fraud. However, the integration of low-cost WSN/IoT systems into a pre-existing industry should first consider security within the context of the application environment. In the case of logistics, the sensors are mobile, unreachable during the deployment, and accessible in potentially uncontrolled environments. The risks to the sensors include physical damage, either malicious/intentional or unintentional due to accident or the environment, or physical attack on a sensor, or remote communication attack. The easiest attack against any sensor is against its communication. The use of IoT sensors for logistics involves the deployment conditions of mobility, inaccesibility, and uncontrolled environments. Any threat analysis needs to take these factors into consideration. This paper presents a threat model focused on an IoT-enabled asset tracking/monitoring system for smart logistics. A review of the current literature shows that no current IoT threat model highlights logistics-specific IoT security threats for the shipping of critical assets. A general tracking/monitoring system architecture is presented that describes the roles of the components. A logistics-specific threat model that considers the operational challenges of sensors used in logistics, both malicious and non-malicious threats, is then given. The threat model categorizes each threat and suggests a potential countermeasure. [ABSTRACT FROM AUTHOR]

In wireless sensor networks (WSNs), unmanned aerial vehicles (UAVs) are considered an effective data collection tool. In this paper, we investigate the energy-efficient data collection problem in a UAV-enabled secure WSN without knowing the instantaneous channel state information of the eavesdropper (Eve). Specifically, the UAV collected the information from all the wireless sensors at the scheduled time and forward it to the fusion center while Eve tries to eavesdrop on this confidential information from the UAV. To surmount this intractable and convoluted mixed-integer non-convex problem, we propose an efficient iterative optimization algorithm using the block coordinate descent (BCD) method to minimize the maximum energy consumption of the ground sensor nodes (GSNs) under the constraints of secrecy outage probability (SOP), connection outage probability (COP), minimum secure data, information causality, and UAV trajectory. Numerical results demonstrate the superiority of the algorithm we proposed in energy consumption and secrecy rate compared with other schemes. [ABSTRACT FROM AUTHOR]

The Internet of Things (IoT) is one of the most important emerging technologies, spanning a myriad of possible applications, especially with the increasing number and variety of connected devices. Several network simulation tools have been developed with widely varying focuses and used in many research fields. Thus, it is critical to simulate the work of such systems and applications before actual deployment. This paper explores the landscape of available IoT and wireless sensor networks (WSNs) simulators and compares their performance using the Low Power Wide Area Network (LPWAN) communication technology called LoRa (Long Range), which has recently gained a lot of interest. Using a systematic approach, we present a chronological survey of available IoT and WSNs simulation tools. With this, we categorized and content-analyzed published scientific papers in the IoT and WSNs simulation tools research domain by highlighting the simulation tools, study type, scope of study and performance measures of the studies. Next, we present an overview of LoRa/LoRaWAN technology by considering its architecture, transmission parameters, device classes and available simulation tools. Furthermore, we discussed three popular open-source simulation tools/frameworks, namely, NS-3, OMNeT++ (FLoRa) and LoRaSim, for the simulation of LoRa/LoRaWAN networks. Finally, we evaluate their performance in terms of Packet Delivery Ratio (PDR), CPU utilization, memory usage, execution time and the number of collisions. [ABSTRACT FROM AUTHOR]

In recent years, different types of monitoring systems have been designed for various applications, in order to turn the urban environments into smart cities. Most of these systems consist of wireless sensor networks (WSN)s, and the designing of these systems has faced many problems. The first and most important problem is sensor node deployment. The main function of WSNs is to gather the required information, process it, and send it to remote places. A large number of sensor nodes were deployed in the monitored area, so finding the best deployment algorithm that achieves maximum coverage and connectivity with the minimum number of sensor nodes is the significant point of the research. This paper provides a systematic mapping study that includes the latest recent studies, which are focused on solving the deployment problem using optimization algorithms, especially heuristic and meta-heuristic algorithms in the period (2015–2022). It was found that 35% of these studies updated the swarm optimization algorithms to solve the deployment problem. This paper will be helpful for the practitioners and researchers, in order to work out new algorithms and seek objectives for the sensor deployment. A comparison table is provided, and the basic concepts of a smart city and WSNs are presented. Finally, an overview of the challenges and open issues are illustrated. [ABSTRACT FROM AUTHOR]

The mobile node location method can find unknown nodes in real time and capture the movement trajectory of unknown nodes in time, which has attracted more and more attention from researchers. Due to their advantages of simplicity and efficiency, intelligent optimization algorithms are receiving increasing attention. Compared with other algorithms, the black hole algorithm has fewer parameters and a simple structure, which is more suitable for node location in wireless sensor networks. To address the problems of weak merit-seeking ability and slow convergence of the black hole algorithm, this paper proposed an opposition-based learning black hole (OBH) algorithm and utilized it to improve the accuracy of the mobile wireless sensor network (MWSN) localization. To verify the performance of the proposed algorithm, this paper tests it on the CEC2013 test function set. The results indicate that among the several algorithms tested, the OBH algorithm performed the best. In this paper, several optimization algorithms are applied to the Monte Carlo localization algorithm, and the experimental results show that the OBH algorithm can achieve the best optimization effect in advance. [ABSTRACT FROM AUTHOR]

With the rapid development of sensor technology, machine learning, and the Internet of Things, wireless sensor networks have gradually become a research hotspot. In order to improve the data fusion performance of wireless sensor networks and ensure network security in the event of external attacks, this paper proposes a wireless sensor optimization algorithm model, involving wireless sensor networks, the Internet of Things, and other related fields. This paper first analyzes the role of the Internet of Things in wireless sensor networks, studies the localization mechanism and hierarchy of the Internet of Things based on wireless sensor networks, and improves the LE-RLPCCA (Position Estimation Robust Local Retention Criteria Correlation Analysis) localization algorithm model based on sensor grids. This paper discusses the problems of machine learning in wireless sensor networks, constructs a sensor-based machine learning model, and designs a data fusion algorithm for a wireless sensor networks' machine learning model. The application of wireless sensors in engineering mechanics experiments is summarized, and the optimization algorithm model of the wireless sensor in engineering mechanics experiments is proposed. The analysis results show that the average accuracy of the DKFCM-FSVM (Density aware Kernel-based Fuzzy C-means Clustering algorithm Fuzzy Support Vector Machine) algorithm in detecting five behaviors is 0.997, 0.992, 0.904, 0.996, and 0.946, respectively, and the accuracy in detecting different behaviors is the best, 0.005, 0.01, 0.003, and 0.006 respectively. It achieves the lowest false positive rate in the detection of different behaviors, and the average false positive rate is 0.004, 0.003, 0.003, 0.008, and 0.005, respectively, which shows that the DKFCM-FSVM algorithm model of wireless sensor networks in engineering mechanics experiments is the optimal solution. The work of this paper has good reference value for the application of wireless sensor networks and the optimization of engineering mechanics experimental methods and is helpful for further research of sensor technology. [ABSTRACT FROM AUTHOR]

Recent studies have shown the efficacy of mobile elements in optimizing the energy consumption of sensor nodes. Current data collection approaches for waste management applications focus on exploiting IoT-enabled technologies. However, these techniques are no longer sustainable in the context of smart city (SC) waste management applications due to the emergence of large-scale wireless sensor networks (LS-WSNs) in smart cities with sensor-based big data architectures. This paper proposes an energy-efficient swarm intelligence (SI) Internet of Vehicles (IoV)-based technique for opportunistic data collection and traffic engineering for SC waste management strategies. This is a novel IoV-based architecture exploiting the potential of vehicular networks for SC waste management strategies. The proposed technique involves deploying multiple data collector vehicles (DCVs) traversing the entire network for data gathering via a single-hop transmission. However, employing multiple DCVs comes with additional challenges including costs and network complexity. Thus, this paper proposes analytical-based methods to investigate critical tradeoffs in optimizing energy consumption for big data collection and transmission in an LS-WSN such as (1) finding the optimal number of data collector vehicles (DCVs) required in the network and (2) determining the optimal number of data collection points (DCPs) for the DCVs. These critical issues affect efficient SC waste management and have been overlooked by previous studies exploring waste management strategies. Simulation-based experiments using SI-based routing protocols validate the efficacy of the proposed method in terms of the evaluation metrics. [ABSTRACT FROM AUTHOR]

In the context of distributed defense, multi-sensor networks are required to be able to carry out reasonable planning and scheduling to achieve the purpose of continuous, accurate and rapid target detection. In this paper, a multi-sensor cooperative scheduling model based on the partially observable Markov decision process is proposed. By studying the partially observable Markov decision process and the posterior Cramer–Rao lower bound, a multi-sensor cooperative scheduling model and optimization objective function were established. The improvement of the particle filter algorithm by the beetle swarm optimization algorithm was studied to improve the tracking accuracy of the particle filter. Finally, the improved elephant herding optimization algorithm was used as the solution algorithm of the scheduling scheme, which further improved the algorithm performance of the solution model. The simulation results showed that the model could solve the distributed multi-sensor cooperative scheduling problem well, had higher solution performance than other algorithms, and met the real-time requirements. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSNs), constrained by limited resources, demand routing strategies that prioritize energy efficiency. The tactic of cooperative routing, which leverages the broadcast nature of wireless channels, has garnered attention for its capability to amplify routing efficacy. This manuscript introduces a power-conscious routing approach, tailored for resource-restricted WSNs. By exploiting cooperative communications, we introduce an innovative relay node selection technique within clustered networks, aiming to curtail energy usage while safeguarding data dependability. This inventive methodology has been amalgamated into the Routing Protocol for Low-Power and Lossy Networks (RPL), giving rise to the cooperative and efficient routing protocol (CERP). The devised CERP protocol pinpoints and selects the most efficacious relay node, ensuring that packet transmission is both energy-minimal and reliable. Performance evaluations were executed to substantiate the proposed strategy, and its practicality was examined using an Arduino-based sensor node and the Contiki operating system in real-world scenarios. The outcomes affirm the efficacy of the proposed strategy, outshining the standard RPL concerning reliability and energy conservation, enhancing RPL reliability by 10% and energy savings by 18%. This paper is posited to contribute to the evolution of power-conscious routing strategies for WSNs, crucial for prolonging sensor node battery longevity while sustaining dependable communication. [ABSTRACT FROM AUTHOR]