Search

This review focuses on the definitions, modalities, applications, and performance of various aspects of digital twins (DTs) in the context of transmission and industrial machinery. In this regard, the context around Industry 4.0 and even aspirations for Industry 5.0 are discussed. The many definitions and interpretations of DTs in this domain are first summarized. Subsequently, their adoption and performance levels for rotating and industrial machineries for manufacturing and lifetime performance are observed, along with the type of validations that are available. A significant focus on integrating fundamental operations of the system and scenarios over the lifetime, with sensors and advanced machine or deep learning, along with other statistical or data-driven methods are highlighted. This review summarizes how individual aspects around DTs are extremely helpful for lifetime design, manufacturing, or decision making even when a DT can remain incomplete or limited. [ABSTRACT FROM AUTHOR]

Gear fault detection and remaining useful life estimation are important tasks for monitoring the health of rotating machinery. In this study, a new benchmark for endurance gear vibration signals is presented and made publicly available. The new dataset was used in the HUMS 2023 conference data challenge to test anomaly detection algorithms. A survey of the suggested techniques is provided, demonstrating that traditional signal processing techniques interestingly outperform deep learning algorithms in this case. Of the 11 participating groups, only those that used traditional approaches achieved good results on most of the channels. Additionally, we introduce a signal processing anomaly detection algorithm and meticulously compare it to a standard deep learning anomaly detection algorithm using data from the HUMS 2023 challenge and simulated signals. The signal processing algorithm surpasses the deep learning algorithm on all tested channels and also on simulated data where there is an abundance of training data. Finally, we present a new digital twin that enables the estimation of the remaining useful life of the tested gear from the HUMS 2023 challenge. [ABSTRACT FROM AUTHOR]

This survey provides a comprehensive overview of traditional techniques and deep learning-based methodologies for monocular visual odometry (VO), with a focus on displacement measurement applications. This paper outlines the fundamental concepts and general procedures for VO implementation, including feature detection, tracking, motion estimation, triangulation, and trajectory estimation. This paper also explores the research challenges inherent in VO implementation, including scale estimation and ground plane considerations. The scientific literature is rife with diverse methodologies aiming to overcome these challenges, particularly focusing on the problem of accurate scale estimation. This issue has been typically addressed through the reliance on knowledge regarding the height of the camera from the ground plane and the evaluation of feature movements on that plane. Alternatively, some approaches have utilized additional tools, such as LiDAR or depth sensors. This survey of approaches concludes with a discussion of future research challenges and opportunities in the field of monocular visual odometry. [ABSTRACT FROM AUTHOR]

The integration of artificial intelligence (AI) with Digital Twins (DTs) has emerged as a promising approach to revolutionize healthcare, particularly in terms of diagnosis and management of thoracic disorders. This study proposes a comprehensive framework, named Lung-DT, which leverages IoT sensors and AI algorithms to establish the digital representation of a patient's respiratory health. Using the YOLOv8 neural network, the Lung-DT system accurately classifies chest X-rays into five distinct categories of lung diseases, including "normal", "covid", "lung_opacity", "pneumonia", and "tuberculosis". The performance of the system was evaluated employing a chest X-ray dataset available in the literature, demonstrating average accuracy of 96.8%, precision of 92%, recall of 97%, and F1-score of 94%. The proposed Lung-DT framework offers several advantages over conventional diagnostic methods. Firstly, it enables real-time monitoring of lung health through continuous data acquisition from IoT sensors, facilitating early diagnosis and intervention. Secondly, the AI-powered classification module provides automated and objective assessments of chest X-rays, reducing dependence on subjective human interpretation. Thirdly, the twin digital representation of the patient's respiratory health allows for comprehensive analysis and correlation of multiple data streams, providing valuable insights as to personalized treatment plans. The integration of IoT sensors, AI algorithms, and DT technology within the Lung-DT system demonstrates a significant step towards improving thoracic healthcare. By enabling continuous monitoring, automated diagnosis, and comprehensive data analysis, the Lung-DT framework has enormous potential to enhance patient outcomes, reduce healthcare costs, and optimize resource allocation. [ABSTRACT FROM AUTHOR]

In recent decades, there have been significant research efforts focusing on wireless indoor localization systems, with fingerprinting techniques based on received signal strength leading the way. The majority of the suggested approaches require challenging and laborious Wi-Fi site surveys to construct a radio map, which is then utilized to match radio signatures with particular locations. In this paper, a novel next-generation cyber-physical wireless indoor positioning system is presented that addresses the challenges of fingerprinting techniques associated with data collection. The proposed approach not only facilitates an interactive digital representation that fosters informed decision-making through a digital twin interface but also ensures adaptability to new scenarios, scalability, and suitability for large environments and evolving conditions during the process of constructing the radio map. Additionally, it reduces the labor cost and laborious data collection process while helping to increase the efficiency of fingerprint-based positioning methods through accurate ground-truth data collection. This is also convenient for working in remote environments to improve human safety in locations where human access is limited or hazardous and to address issues related to radio map obsolescence. The feasibility of the cyber-physical system design is successfully verified and evaluated with real-world experiments in which a ground robot is utilized to obtain a radio map autonomously in real-time in a challenging environment through an informed decision process. With the proposed setup, the results demonstrate the success of RSSI-based indoor positioning using deep learning models, including MLP, LSTM Model 1, and LSTM Model 2, achieving an average localization error of ≤ 2.16 m in individual areas. Specifically, LSTM Model 2 achieves an average localization error as low as 1.55 m and 1.97 m with 83.33 % and 81.05 % of the errors within 2 m for individual and combined areas, respectively. These outcomes demonstrate that the proposed cyber-physical wireless indoor positioning approach, which is based on the application of dynamic Wi-Fi RSS surveying through human feedback using autonomous mobile robots, effectively leverages the precision of deep learning models, resulting in localization performance comparable to the literature. Furthermore, they highlight its potential for suitability for deployment in real-world scenarios and practical applicability. [ABSTRACT FROM AUTHOR]

Environmental effects may lead to cracking, stiffness loss, brace damage, and other damages in bridges, frame structures, buildings, etc. Structural Health Monitoring (SHM) technology could prevent catastrophic events by detecting damage early. In recent years, Deep Learning (DL) has developed rapidly and has been applied to SHM to detect, localize, and evaluate diverse damages through efficient feature extraction. This paper analyzes 337 articles through a systematic literature review to investigate the application of DL for SHM in the operation and maintenance phase of facilities from three perspectives: data, DL algorithms, and applications. Firstly, the data types in SHM and the corresponding collection methods are summarized and analyzed. The most common data types are vibration signals and images, accounting for 80% of the literature studied. Secondly, the popular DL algorithm types and application areas are reviewed, of which CNN accounts for 60%. Then, this article carefully analyzes the specific functions of DL application for SHM based on the facility's characteristics. The most scrutinized study focused on cracks, accounting for 30 percent of research papers. Finally, challenges and trends in applying DL for SHM are discussed. Among the trends, the Structural Health Monitoring Digital Twin (SHMDT) model framework is suggested in response to the trend of strong coupling between SHM technology and Digital Twin (DT), which can advance the digitalization, visualization, and intelligent management of SHM. [ABSTRACT FROM AUTHOR]

Localizing leakages in large water distribution systems is an important and ever-present problem. Due to the complexity originating from water pipeline networks, too few sensors, and noisy measurements, this is a highly challenging problem to solve. In this work, we present a methodology based on generative deep learning and Bayesian inference for leak localization with uncertainty quantification. A generative model, utilizing deep neural networks, serves as a probabilistic surrogate model that replaces the full equations, while at the same time also incorporating the uncertainty inherent in such models. By embedding this surrogate model into a Bayesian inference scheme, leaks are located by combining sensor observations with a model output approximating the true posterior distribution for possible leak locations. We show that our methodology enables producing fast, accurate, and trustworthy results. It showed a convincing performance on three problems with increasing complexity. For a simple test case, the Hanoi network, the average topological distance (ATD) between the predicted and true leak location ranged from 0.3 to 3 with a varying number of sensors and level of measurement noise. For two more complex test cases, the ATD ranged from 0.75 to 4 and from 1.5 to 10, respectively. Furthermore, accuracies upwards of 83%, 72%, and 42% were achieved for the three test cases, respectively. The computation times ranged from 0.1 to 13 s, depending on the size of the neural network employed. This work serves as an example of a digital twin for a sophisticated application of advanced mathematical and deep learning techniques in the area of leak detection. [ABSTRACT FROM AUTHOR]

This article introduces a novel framework for diagnosing faults in rolling bearings. The framework combines digital twin data, transfer learning theory, and an enhanced ConvNext deep learning network model. Its purpose is to address the challenges posed by the limited actual fault data density and inadequate result accuracy in existing research on the detection of rolling bearing faults in rotating mechanical equipment. To begin with, the operational rolling bearing is represented in the digital realm through the utilization of a digital twin model. The simulation data produced by this twin model replace traditional experimental data, effectively creating a substantial volume of well-balanced simulated datasets. Next, improvements are made to the ConvNext network by incorporating an unparameterized attention module called the Similarity Attention Module (SimAM) and an efficient channel attention feature referred to as the Efficient Channel Attention Network (ECA). These enhancements serve to augment the network's capability for extracting features. Subsequently, the enhanced network model is trained using the source domain dataset. Simultaneously, the trained model is transferred to the target domain bearing using transfer learning techniques. This transfer learning process enables the accurate fault diagnosis of the main bearing to be achieved. Finally, the proposed method's feasibility is validated, and a comparative analysis is conducted in comparison with similar approaches. The comparative study demonstrates that the proposed method effectively addresses the issue of low mechanical equipment fault data density, leading to improved accuracy in fault detection and classification, along with a certain level of robustness. [ABSTRACT FROM AUTHOR]

For the next coming years, metaverse, digital twin and autonomous vehicle applications are the leading technologies for many complex applications hitherto inaccessible such as health and life sciences, smart home, smart agriculture, smart city, smart car and logistics, Industry 4.0, entertainment (video game) and social media applications, due to recent tremendous developments in process modeling, supercomputing, cloud data analytics (deep learning, etc.), communication network and AIoT/IIoT/IoT technologies. AIoT/IIoT/IoT is a crucial research field because it provides the essential data to fuel metaverse, digital twin, real-time Industry 4.0 and autonomous vehicle applications. However, the science of AIoT is inherently multidisciplinary, and therefore, it is difficult for readers to understand its evolution and impacts. Our main contribution in this article is to analyze and highlight the trends and challenges of the AIoT technology ecosystem including core hardware (MCU, MEMS/NEMS sensors and wireless access medium), core software (operating system and protocol communication stack) and middleware (deep learning on a microcontroller: TinyML). Two low-powered AI technologies emerge: TinyML and neuromorphic computing, but only one AIoT/IIoT/IoT device implementation using TinyML dedicated to strawberry disease detection as a case study. So far, despite the very rapid progress of AIoT/IIoT/IoT technologies, several challenges remain to be overcome such as safety, security, latency, interoperability and reliability of sensor data, which are essential characteristics to meet the requirements of metaverse, digital twin, autonomous vehicle and Industry 4.0. applications. [ABSTRACT FROM AUTHOR]

Most of the buildings that exist today were built based on 2D drawings. Building information models that represent design-stage product information have become prevalent in the second decade of the 21st century. Still, it will take many decades before such models become the norm for all existing buildings. In the meantime, the building industry lacks the tools to leverage the benefits of digital information management for construction, operation, and renovation. To this end, this paper reviews the state-of-the-art practice and research for constructing (generating) and maintaining (updating) geometric digital twins. This paper also highlights the key limitations preventing current research from being adopted in practice and derives a new geometry-based object class hierarchy that mainly focuses on the geometric properties of building objects, in contrast to widely used existing object categorisations that are mainly function-oriented. We argue that this new class hierarchy can serve as the main building block for prioritising the automation of the most frequently used object classes for geometric digital twin construction and maintenance. We also draw novel insights into the limitations of current methods and uncover further research directions to tackle these problems. Specifically, we believe that adapting deep learning methods can increase the robustness of object detection and segmentation of various types; involving design intents can achieve a high resolution of model construction and maintenance; using images as a complementary input can help to detect transparent and specular objects; and combining synthetic data for algorithm training can overcome the lack of real labelled datasets. [ABSTRACT FROM AUTHOR]

Weld site inspection is a research area of interest in the manufacturing industry. In this study, a digital twin system for welding robots to examine various weld flaws that might happen during welding using the acoustics of the weld site is presented. Additionally, a wavelet filtering technique is implemented to remove the acoustic signal originating from machine noise. Then, an SeCNN-LSTM model is applied to recognize and categorize weld acoustic signals according to the traits of strong acoustic signal time sequences. The model verification accuracy was found to be 91%. In addition, using numerous indicators, the model was compared with seven other models, namely, CNN-SVM, CNN-LSTM, CNN-GRU, BiLSTM, GRU, CNN-BiLSTM, and LSTM. A deep learning model, and acoustic signal filtering and preprocessing techniques are integrated into the proposed digital twin system. The goal of this work was to propose a systematic on-site weld flaw detection approach encompassing data processing, system modeling, and identification methods. In addition, our proposed method could serve as a resource for pertinent research. [ABSTRACT FROM AUTHOR]

Railway track maintenance plays an important role in enabling safe, reliable, and seamless train operations and passenger comfort. Due to the increasing rail transportation, rolling stocks tend to run faster and the load tends to increase continuously. As a result, the track deteriorates quicker, and maintenance needs to be performed more frequently. However, more frequent maintenance activities do not guarantee a better overall performance of the railway system. It is crucial for rail infrastructure managers to optimize predictive and preventative maintenance. This study is the world's first to develop deep machine learning models using three-dimensional recurrent neural network-based co-simulation models to predict track geometry parameters in the next year. Different recurrent neural network-based techniques are used to develop predictive models. In addition, a building information modeling (BIM) model is developed to integrate and cross-functionally co-simulate the track geometry measurement with the prediction for predictive and preventative maintenance purposes. From the study, the developed BIM models can be used to exchange information for predictive maintenance. Machine learning models provide the average R2 of 0.95 and the average mean absolute error of 0.56 mm. The insightful breakthrough demonstrates the potential of machine learning and BIM for predictive maintenance, which can promote the safety and cost effectiveness of railway maintenance. [ABSTRACT FROM AUTHOR]

Having access to accurate and recent digital twins of infrastructure assets benefits the renovation, maintenance, condition monitoring, and construction planning of infrastructural projects. There are many cases where such a digital twin does not yet exist, such as for legacy structures. In order to create such a digital twin, a mobile laser scanner can be used to capture the geometric representation of the structure. With the aid of semantic segmentation, the scene can be decomposed into different object classes. This decomposition can then be used to retrieve cad models from a cad library to create an accurate digital twin. This study explores three deep-learning-based models for semantic segmentation of point clouds in a practical real-world setting: PointNet++, SuperPoint Graph, and Point Transformer. This study focuses on the use case of catenary arches of the Dutch railway system in collaboration with Strukton Rail, a major contractor for rail projects. A challenging, varied, high-resolution, and annotated dataset for evaluating point cloud segmentation models in railway settings is presented. The dataset contains 14 individually labelled classes and is the first of its kind to be made publicly available. A modified PointNet++ model achieved the best mean class Intersection over Union (IoU) of 71% for the semantic segmentation task on this new, diverse, and challenging dataset. [ABSTRACT FROM AUTHOR]

In this paper, we develop innovative digital twins of cattle status that are powered by artificial intelligence (AI). The work is built on a farm IoT system that remotely monitors and tracks the state of cattle. A digital twin model of cattle based on Deep Learning (DL) is generated using the sensor data acquired from the farm IoT system. The physiological cycle of cattle can be monitored in real time, and the state of the next physiological cycle of cattle can be anticipated using this model. The basis of this work is the vast amount of data that is required to validate the legitimacy of the digital twins model. In terms of behavioural state, this digital twin model has high accuracy, and the loss error of training reach about 0.580 and the loss error of predicting the next behaviour state of cattle is about 5.197 after optimization. The digital twins model developed in this work can be used to forecast the cattle's future time budget. [ABSTRACT FROM AUTHOR]

Nowadays, the digital twin (DT) plays an important role in Industry 4.0. It aims to model reality in the digital space for further industrial maintenance, management, and optimization. Previously, many AI technologies have been applied in this field and provide strong tools to connect physical and virtual spaces. However, we found that single-view 3D reconstruction (SVR) for DT has not been thoroughly studied. SVR can generate 3D digital models of real industrial products from just a single image. The application of SVR technology would bring convenience, cheapness, and robustness to modeling physical objects in digital space. However, the existing SVR methods cannot perform well in the reconstruction of details, which is indispensable and challenging in industrial products. In this paper, we propose a new detail-aware feature extraction network based on a feature pyramid network (FPN) for better detail reconstruction. Then, an extra network is designed to combine convolutional feature maps from different levels. Moreover, we also propose a novel adaptive points-sampling strategy to adaptively change the learning difficulty according to the training status. This can accelerate the training process and improve the fine-tuned network performance as well. Finally, we conduct comprehensive experiments on both the general objects dataset ShapeNet and a collected industrial dataset to prove the effectiveness of our methods and the practicability of the SVR technology for DT. [ABSTRACT FROM AUTHOR]